• Membrane Journal
• /
• v.28 no.5
• /
• pp.351-360
• /
• 2018

In this study, propylene/propane separation mechanism through NaY zeolite membrane was investigated. As permeation temperature increased, both propylene and propane permeances increased, saturated and decreased again, and a maximum selectivity was shown at around 50 to $60^{\circ}C$. Propane permeance in mixed gas experiment was much smaller than that in single gas experiment, and propylene/propane mixed gas selectivity was much larger than single gas permselectivity. As permeation time increased in transient permeation experiment, propylene permeance initially increased and saturated, while propane permeance decreased and saturated. All the experimental results announced that propylene/propane separation through NaY zeolite membrane was from preferentially adsorbed propylene molecules. The adsorbed propylene molecules efficiently prevented propane molecules from permeating through the membrane, and sufae diffused through the membrane. NaY zeolite capillary membrane prepared in the present study showed a high mixed gas selectivity of 12 and high propylene permeance of 497 GPU for a propylene/propane (89 : 11) mixture at $50^{\circ}C$ and 4 bar. Therefore, it was concluded that NaY zeolite membrane is one of promising membrane materials for propylene/propane separation due to the low cost and high separation performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.45-50
• /
• 2016

This paper reports a Ringer's solution detector and transceiver design for the efficient management of patients. The ringer's solution detection and transceiver consisted of the main control part, ringer's solution detection part, display and warning light part, wireless transceiver, and power supply part. The light receiving part of the ringer's solution detection part employed TSL260R-LF photodiode; light permeating part, Water-Clear type LED; and wireless transceiver part, the RF wireless data transceiver module, NR-FPCX. As a result of this Ringer's solution detector and transceiver design that can manage the patient efficiently, it was found that when the ringer's solution was detected by the double photodiode, the operating frequency was 11.95kHz; when it was not detected, the number was 9.6kHz. In the ringer's solution receiver, when the ringer's solution was detected, the number was 0. The corresponding unique RF code was displayed when not detected. The power used in the ringer's solution detection part was converted to the Sleep mode to operate under battery save mode. The ringer's solution transceiver can exchange wireless communication approximately within a 700m radius.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.5
• /
• pp.187-191
• /
• 2019

Perovskite-type oxides have consistently attracted considerable attention for their applications in high-temperature electrochemical devices, such as electrolytes and electrodes of solid oxide fuel cells, oxygen permeating membranes and sensors etc. Among them, the electrical conductivity of 10 % Sr and 10 % Mg doped $LaAlO_3$ (LSAM9191) was measured using impedance spectroscopy and 4-probe d.c. method. Below $550^{\circ}C$, the grain boundary resistance mostly determined the overall conductivity; however, it nearly disappeared above $800^{\circ}C$. Using the defect model and curve fitting, the ionic and electronic conductivity contributions were also separated. In the temperature region where the sample resistance is mostly determined by the grain volume property, LSAM9191 was an oxygen ion conductor at low $Po_2$ and a mixed conductor at high $Po_2$. With increasing temperature, the ionic conduction region only slightly increased. Thus, LSAM9191 is a promising material as an oxygen ion conductor at high temperature and in low $Po_2$.

• Korean Journal of Animal Reproduction
• /
• v.25 no.1
• /
• pp.19-28
• /
• 2001

The present study was undertaken to investigate the effects of cooling rate and equilibration time on the survival, in vitro maturation and development to embryos of frozen-thawed bovine immature oocytes(Germinal Vesicle Stage). The cryoprotectants are used 10% ethylene glycol(EG) as permeating cryoprotectant and 0.05M soc.ose(S) or trehalose(T) as low molecular weight nonpermeating cryoprotectants and 5% ficoll(F) or polyvinylpyrrolidone(PVP) as high molecular weight nonpermeating cryoprotectants. Four freezing solution were uysed in this experiment(EFT: 10% EG + 5% F + 0.05M T, EFS: 10% EG + 5% F + 0.05M S, EPT: 10% EG + 5% P + 0.05M T, EPS: 10% EG + 5% P + 0.05M S). The best equilibration time and freezing solution was 15 min in EPT(83% survival rate of frozen-thawed bovine immature oocytes). When frozen-thawed bovine oocytes were cultured following IVM and IVF, there was no significant difference in cleavage and development rates among the EFT, EFS, EPT and EPS solutions. When 9 blastocysts derived from frozen bovine oocytes were transferred to 6 recipients, two recipients were pregnant. And one was aborted at 45 days of pregnancy and the other had a stillbirth.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.6
• /
• pp.23-39
• /
• 2014

An artificial rainwater reservoir installed in urban areas for recycling rainwater is an eco-friendly facility for reducing storm water effluence. However, in order to recycle the rainwater directly, the artificial rainwater reservoir requires an auxiliary system that can remove non-point source pollutants included in the initial rainfall of urban area. Therefore, the conventional soil filtration technology is adopted to capture non-point source pollutants in an economical and efficient way in the purification system of artificial rainwater reservoirs. In order to satisfy such a demand, clogging characteristics of the sand filter layers with different grain-size distributions were studied with real non-point source pollutants. For this, a series of lab-scale chamber tests were conducted to make a prediction model for removal of non-point source pollutants, based on the clogging theory. The laboratory chamber experiments were carried out by permeating two types of artificially contaminated water through five different types of sand filter layers with different grain-size distributions. The two artificial contaminated waters were made by fine marine-clay particles and real non-point source pollutants collected from motorcar roads of Seoul, Korea. In the laboratory chamber experiments, the concentrations of the artificial contaminated water were measured in terms of TSS (Total Suspended Solids) and COD (Chemical Oxygen Demand) and compared with each other to evaluate the performance of sand filter layers. In addition, the accumulated weight of pollutant particles clogged in the sand filter layers was estimated. This paper suggests a prediction model for removal of non-point source pollutants with theoretical consideration of the physical characteristics such as the grain-size distribution and composition, and change in the hydraulic conductivity and porosity of sand filter layers. The lumped parameter ${\theta}$ related with the clogging property was estimated by comparing the accumulated weight of pollutant particles obtained from the laboratory chamber experiments and calculated from the prediction model based on the clogging theory. It is found that the lumped parameter ${\theta}$ has a significant influence on the amount of the pollutant particles clogged in the pores of sand filter layers. In conclusion, according to the clogging prediction model, a double-sand-filter layer consisting of two separate layers: the upper sand-filter layer with the effective particle size of 1.49 mm and the lower sand-filter layer with the effective particle size of 0.93 mm, is proposed as the optimum system for removing non-point source pollutants in the field-sized artificial rainwater reservoir.