• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.8
• /
• pp.1362-1368
• /
• 2016

This paper proposes the improved transition scheme for a sensorless drive of an interior permanent magnet synchronous motor (IPMSM). In order to operate the IPMSM, the current controller can be used until 300 rpm for the initial operation. After that, the control method of IPMSM is changed to the speed controller for the sensorless control method. At that point, the rotor speed overshoot is generated due to the rapid change of the current reference for the speed controller. The proposed algorithm is able to reduce the overshoot of a rotor speed by compensating the estimated feedforward value to the speed controller. The feedforward value of the current reference is estimated by using a coordinate transformation and is approximated to the current reference after the transition of the control mode. The effectiveness of the proposed scheme is verified by experiments using an IPMSM drive system.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.5-9
• /
• 1990

A permanent magnet synchronous motor(PMSM) differs from an ordinary synchronous motor in that the former has no field winding and the field flux can not be controlled by field current. A field-weakening control of PMSM utilizing the demagnetization due to d-axis armature reaction is equivalent to reducing the field current. In this paper, the armature resistance is considered for the optimum field-weakening control.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.3
• /
• pp.146-154
• /
• 1988

The computer simulation of speed and phase control system has been carried out in this study. The load of permanent magnet type synchronous motor is not constant in this system. The cost function method has been used in obtaining the optimal gain of PI controller and the rotor position angle of phase controller has been compensated depending on the load and speed variation. This analysis also shows that the current of d-axis component is zero under the variable a load conditions and the torque per unit current can be maximized.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.97.1-97.1
• /
• 2008

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.775-781
• /
• 2022

As part of research to develop a permanent wave-reducing agent for hair, in the current study, 0.1%-1.0% of Polyquaternium-10 was added to a permanent reagent containing Nicotinoyl Dipeptide-23 to prepare the agent, which was tested on damaged hair. The pH change was relatively stable even after a date, but due to the hair's natural composition, 0.1%-0.6% of the Polyquaternium-10 concentration according to pH was suitable. The temperature safety experiment demonstrated it to be stable at a high temperature and at room temperature, but when a Polyquaternium-10 concentration of 0.9% or higher was added at 0℃, coagulation occurred. In terms of the force efficiency of permanent wave formation, wave efficiency lowered as the concentration increased: the longer the wave lasts, the lower the Polyquaternium-10 concentration. The permanent moisture content was found to be higher as the concentration of Polyquaternium-10 increased. Therefore, when Polyquaternium-10 is applied to the permanent wave-reducing agent, considering stability, permanent formation, durability, and moisture rate, the most suitable concentration was found to be that of Polyquaternium-10 in the cysteine-reducing agent. A novel finding from this study is that as the concentration of Polyquaternium-10 increases, the consistency of the permanent wave-reducing agent changes, shifting from a liquid to a viscous liquid formulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.5
• /
• pp.426-430
• /
• 2006

This paper deals with a novel utilization method of the predicted current in the high performance PI current controller with a control time delay. The inevitable error of the predicted current in the linear servo drive using a permanent magnet linear synchronous motor is analyzed and a modified cross-coupling decoupling synchronous frame PI current controller is proposed in order to improve the current control response under both the control time delay and the inevitable current prediction error. Simulation and experimental results show that the proposed current controller has an improved current control performance under both the control time delay and the inevitable current prediction error in the servo drive system.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.193-194
• /
• 2017

This paper proposes a current control method in synchronous coordinate for vector control of PMSM (Permanent Magnet Synchronous Motor). In order to control the PMSM by MTPA(Maximum Torque per Ampere), it is necessary to generate the rotating magnetic field to be $90^{\circ}$ with the magnetic field of the rotor, and the current control is necessary. To apply the current control to PMSM, the phase of the current command is also changed in accordance with the change of the position of the motor rotor. In this paper, the control of PMSM is performed through simulation using DC current command in synchronous coordinate system.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.72-76
• /
• 1997

Interior permanent magnet synchronous motors can be applied to applications requiring wide-speed operation. The current control scheme of an interior permanent magnet synchronous (IPM) motor via feedback linearizing technique is proposed. As the available voltage controlling the armature current is small in transient operations and/or flux-weakening region, the current control performance can be deteriorated. The high performance overmodulation strategy is also proposed to improve the current responses. The control performances are confirmed by simulations.

• Journal of Aerospace System Engineering
• /
• v.3 no.2
• /
• pp.39-43
• /
• 2009

Eddy currents are generated when a moving conductor is exposed to a stationary magnetic field, or vice-versa. These currents create their own magnetic field, causing a repulsive force between the magnetic material and the conductor. Using this concept, a magnetic brake system can be established by the permanent magnets and a conductive material. In this paper, the eddy current effects on a magnetic brake system which consists of 2 pairs of magnets and a conductor are investigated by using a electromagnetic software, and the results of simulations are compared with experiments. It can be concluded how the arrangement of magnets effects on the dynamic characteristics of the eddy current brake system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.183-186
• /
• 1997

This paper presents the new MR rotary brake with a permanent magnet, based on the shear operating mode. Due to the permanent magnet, the MR rotary brake can give the nominal resistance to the external disturbance and give the fail safe capacity to the system even when the power supply is accidentally cut off. As we apply the positive or negative current to the electric magnet coil, the resistance torque of the MR rotary brake can be reduced to the value less than the nominal resistance or increased up to the magnetic saturation point.