• Advances in materials Research
• /
• v.4 no.4
• /
• pp.227-233
• /
• 2015

We present a method, supported by theoretical analysis, for optimizing the usage of the critical rare earth element dysprosium in $Nd_2Fe_{14}B$ (NdFeB)-based permanent magnets. In this method, we use Dy selectively in locations such as magnet edges and faces, where demagnetization factors are largest, rather than uniformly throughout the bulk sample. A200 nm thick Dy film was sputtered onto a commercial N-38, NdFeB magnets with a thickness of 3 mm and post-annealed at temperatures from $600-700^{\circ}C$. Magnets displayed enhanced coercivities after post-annealing and as much as a 5 % increase in the energy product, while requiring a total Dy content of 0.06 wt. % - a small fraction of that used in the commercial grade Dy-NdFeB magnets. By assuming all Dy diffused into NdFeB magnets, the improvement in energy product corresponds to a saving of over 1% Dy (critical element). Magnets manufactured using this technique will therefore be higher performing which would potentially broaden the application space of these magnets in the traction motors of hybrid and pure electric vehicles, and wind generators.

• Korean Journal of Cleft Lip And Palate
• /
• v.6 no.2
• /
• pp.69-89
• /
• 2003

The purpose of this study was to examine and analyze the basic conditions of dental health of cleft lip and palate patients at early mixed dentition (7-year-old, experimental group A) and early permanent dentition period (12,13-year old, experimental group B) and compare them with those of normal children. The sample was consisted of 25 patients at the age of 7 years, 15 at the age of 12 years and 5 at the age of 13 years. Two trained dentists examined orthopantomographs and clinical photos at the first visit of each patient and distinguished the states by teeth and dental surface and filled them on the prescribed forms. DMF rate, DMF index, FT rate, mean number of permanent teeth with fissure sealants, DMFS index and mean percentage of caries experienced maxillary anterior 6 teeth by tooth type are calculated and compared to those of other studies examined normal children. Oral hygiene of experimental groups is poorer than control groups'. Preventive and treatment rate of experimental groups' are lower than control groups'. More concem and effort are needed about prevention and treatment of dental caries of cleft lip and palate patients.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.331-336
• /
• 1995

The steady-state absorption saturation of the photodarkend SDG was investigated. The absorption saturation intensity was observed to increase for the photodarkened sample. The diffraction efficiency of the permanent grating due to photodarkening was also measured using the backward DFWM technique. For the low backward pump intensity, the diffraction efficiency was proportional to the intensity of the pump beam. The origin of increasing diffraction efficiency is attributed to the difference in absorption between the permanent gratings created by photodarkening. ening.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.3
• /
• pp.45-52
• /
• 2022

Prediction of soil behavior should be interpreted based on the level of axial strain in the actual ground. Recently numerical methods have been carried out focus on the state of soil failure. However considered the deformation of soil the prior to failure, mostly the small strain occurring in the elastic range is considered. As a result of calculating the deformation modulus to 50% of the maximum unconfined compression strength, Deformation modulus (E50) showed a tendency to increase according to the degree of compaction by region. The Poisson's ratio during loading-unloading was 0.63, which was higher than the literature value of 0.5. For the unconfined compression test under cyclic loading for the measurement of permanent strain, the maximum compression strength was divided into four step and the test was performed by load step. Changes in permanent strain and deformation modulus were checked by the loading-unloading test for each stage. At 90% compaction, the permanent deformation of the SM sample was 0.21 mm, 0.37 mm, 0.6 mm, and 1.35 mm. The SC samples were 0.1 mm, 0.17 mm, 0.42 mm, and 1.66 mm, and the ML samples were 0.48 mm, 0.95 mm, 1.30 mm, and 1.68 mm.

• Journal of Korean Society of Forest Science
• /
• v.104 no.2
• /
• pp.239-247
• /
• 2015

Since 2006, new national forest inventory in Korea has been restructured to assess current status and and monitor the changes in forest resources based on permanent sample plots. The objective of estimate this study is to assess changes in forest resources such as land use/cover categories and forest stand variables. For this study, permanent plot data were collected between 2006-2008 and 2011-2013 in Chungcheongbuk-do, respectively. In order to produce land use/cover change matrix which plays an important role as an activity data for estimating GreenHouse Gas inventory, permanent plots were classified into six land use/cover categories. Additionally, matrixes for assessing the changes in age class and dominant tree species can provide more detailed information. For forest stand variables(tree density, basal area, growing stock, mean diameter at breath height, and mean height), their growth and change were assessed. The periodic annual growth ratios for tree density and basal area were slightly declined whereas that of growing stock was estimated to be about 3.7%. The uncertainty of changes in forest stand variables is less than 5%, except for tree density (RSE: 58%). The variation of tree density is relatively high compared to the other variables.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.4
• /
• pp.12-15
• /
• 2009

The $I_c$ degradation behavior of critical current in differently processed YBCO and SmBCO CC tapes with IBAD template has been investigated. It has been known that the residual strain in the CC tape will influence the shape of the $I_c$-strain window; $I_c$ may show a peak value if there exist a residual strain induced in the tape during manufacturing. The difference of residual strain may be resulted from the adopted different deposition techniques. In this study, bending test of CC tapes has been done using the Goldacker bending test rig which can produce both compressive and tensile bending strain continuously or alternately to the sample. For SmBCO CC tapes, in continuous compressive bending test, $I_c$ showed a minimal increase and did not degrade up to the largest strain that can be applied using the bending rig equivalent to 1.15% based on the sample thickness. However, in the case of alternate application of compressive and tensile bending strain, $I_c$ showed a larger degradation and a lower reversible limit when compared with the case of continuous application of the bending strain. When $I_c$ started to degrade significantly at the tension side, the reversibility ended, also at the compression side which is resulted from the permanent deformation like delamination or cracks that was induced due to tensile bending strain.

• Journal of dental hygiene science
• /
• v.16 no.3
• /
• pp.217-224
• /
• 2016

The aim of this study was to evaluate whether the number of existing permanent teeth is associated with chronic obstructive pulmonary disease (COPD) in a representative sample of Korean adults. Data from 3,107 subjects who participated in the 2009 Korea National Health and Nutrition Examination Survey were examined. The dependent variable was COPD and the independent variable was the number of existing permanent teeth. Spirometry results were classified into three groups (normal pattern, restrictive pattern, and obstructive pattern) by trained technicians. We used dichotomized COPD variables (no vs. yes). The number of existing permanent teeth was evaluated by oral examination and divided into 3 groups (0~19, 20~27, and 28). Demographic factors (age group and sex group), socioeconomic status (education and income), health behaviors (smoking and drinking), oral health and behavior (frequency of toothbrushing; periodontitis; decayed, missing, filled, permanent teeth index; and denture status), and general health status (body mass index, diabetes mellitus, and hypertension) were included as confounders in the analysis. Bivariate analysis and multivariate logistic regression analyses including confounders were applied, and all analyses considered a complex sampling design. Stratified analysis was performed by smoking status. After controlling for various confounders, there was a significant association between the number of existing permanent teeth and COPD (odds ratio [OR], 1.90; 95% confidence interval [CI], 1.20~3.00 for the 20~27 group; OR, 3.93; 95% CI, 1.75~8.84 for the 0~19 group). The association was more significant in current smokers (OR, 8.90; 95% CI, 2.53~31.33). Our data indicate that the number of existing permanent teeth was independently associated with COPD, especially in current smokers. Further longitudinal research is needed to determine whether oral health promotion plays a role in the improvement of lung function and prevention of COPD.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.272-285
• /
• 2003

This study was conducted to observe the microscopic structures of cavities formed after ablation of primary teeth, permanent teeth, enamel and dentin in using a bur and cavities formed after ablation using laser and the following results were obtained after comparing the effects of ablation. Using a #330 bur and Er:YAG laser irradiated at 150 mJ, 200 mJ, 250 mJ and 300 mJ all at the frequency of 5 Hz, 1 mm enamel and dentin samples were ablated and the ablation time was measured. In order to measure the surfaces ablated, 5 each of primary teeth and permanent teeth were ablated using a #330 bur and Er:YAG laser at 150 mJ, 200 mJ, 250 mJ and 300 mJ for 1 sec and the cross section and vertical section were observed. The following results were obtained : 1. Cutting time of Er:YAG laser was longer than that of conventinal high-speed bur regardless of teeth type. 2. Cutting on enamel, Cutting time of conventional high-speed bur in deciduous teeth was longer than in permanent teeth(P<0.05). But Er:YAG laser was not showed any difference between the deciduous and permanent teeth(P>0.05). 3. Cutting on dentin, Cutting time of conventional high-speed bur in permanent teeth was longer than deciduous teeth. Er:YAG laser of 150 mJ, 5 Hz in permanent teeth was longer than in deciduous teeth(p<0.05). But laser of other power did not showed mean difference. 4. The cavity surface treated with the convetional high-speed bur revealed a relatively flat appearance, almost covered with a debris-like smear layer. Cavity wall showed striped appearance because of blade of bur. 5. The cavity surface treated by the Er:YAG laser system was irregular or rough surface with the absence charring, carbonization, or cracking of the dentin. In addition, there was an absence of a smear layer. Cavity floor was round and relatively smooth. According to these results, cutting time of Er:YAG laser was almostly same in permanent and deciduous teeth, but more effective in dentin than enamel. Cutting the sample, Er:YAG laser was needed more time than conventional bur. But SEM findings suggested that laser device produced favorable surface characteristic(i.e, no smear layer, irregular surface, cracking).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.3
• /
• pp.430-437
• /
• 2007

The probability table of Moyers and prediction equation of Tanaka and Johnston that have been the most frequently used, cannot produce accurate prediction when used in Korean because they are based on the Caucasian popularity of the Northern European race. The method of Moyers or Tanaka and Johnston predicts sizes of the unerupted canine and premolars on the basis of the sizes of mandibular incisors. However, some of the recent papers raise a question as to whether the mandibular incisors are the best combination to predict the sizes of the unerupted canine and premolars. The purpose of this study is to determine which sum or combination of sums of permanent tooth widths present the best prediction for the unerupted canine and premolars in a Korean sample, to calculate a specific linear regression equation for this population, and to evaluate the clinical significance. A new linear regression equation was calculated based on the data of 178 Korean young adults(70 women, 108 men, mean age 21.63 years) with complete permanent dentitions. Fifty three more children(28 girls, 25 boys, mean age 14.22 years) were used as a validation sample for the application of the multiple linear regression equation. The conclusions were as follows: 1. The combination of the sums of permanent upper central incisors, lower lateral incisors and upper first molars was the best predictor for the unerupted canine and premolars in this sample($r=0.65{\sim}0.80$). 2. The multiple linear regression equation was calculated including sex and arch as additional predictor variables. male, upper: $Y\;=\;0.332{\times}X_0\;+\;6.195$ male, lower: $Y\;=\;0.332{\times}X_0\;+\;5.269$ female, upper: $Y\;=\;0.332{\times}X_0\;+\;5.929$ female, lower: $Y\;=\;0.332{\times}X_0\;+\;5.003$. The determination coefficient of the equation was 64% and a standard error of the estimate was 0.71mm. 3. In about 97% of the validation sample, the estimation of the tooth width sums of unerupted canine and premolars using the new multiple linear regression equation was smaller than 1mm compaired with the actual values.

• Journal of the Korean Magnetics Society
• /
• v.25 no.6
• /
• pp.189-197
• /
• 2015

As enforced the regulation of fuel efficiency, the electrification of automotive components in internal combustion vehicle has been applied instead of hydraulic pressure. A typical example of such parts is the EPS (electric power steering), and it is applied to most automotive at present. In electric power steering system, the core component is motor. The reduction of cogging torque and torque ripple is required to improve steering feeling and reduce NVH (Noise Vibration Harshness) in EPS. Generally the skewed design of stator or rotor is applied in order to reduce cogging torque and torque ripple. This paper propose the design and analysis methodology of Brusheless PMSM (Permanent Magnet Synchronous Motor) which is applied to skewed stator. The proposed methodology is as follows: First Intial Design PMSM with skewed stator for EPS, Second Optimal design using RSM (Response surface method), Third Performance Analysis such as Phase Back EMF, Inductance, Load torque using FEA (Finite Element Method). Finally, the reliability of proposed design methodology will be verified through the experiments of prototype sample.