• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.420-423
• /
• 2010

We fabricated 1 mm-thick periodically-poled lithium niobate (PPLN) crystals by using a high-voltage amplifier for standard electric field poling combined with a voltage multiplier. Furthermore, two 1 mm-thick PPLNs were directly bonded to make a 2 mm-thick PPLN. The large aperture allowed broad angular tuning, and a broad spectral range of quasi-phase matched second-harmonic generation can be achieved in a single channel. High-power applications are also expected.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.143-146
• /
• 2004

This study is aimed to numerically evaluate a sound absorption performance of periodically folded barriers. Based on the formulation for sound absorption of a locally reacting surface in a periodic arrangement, variations of the sound absorption with parameters such as the folded width and depth are investigated. In comparison with the sound absorption of a conventional barrier with a flat surface, it is found that the periodically folded barriers can achieve a higher sound absorption especially in the low frequency range.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.412-416
• /
• 2005

In this paper we propose low-impedance and miniaturized a wilkinson power divider on MMIC passive component which was fabricated by a novel microstrip line structure employing periodically perforated ground metal (PPGM). The novel microstrip line structure showed much lower impedance and shorter guided-wavelength than conventional one. Using the novel microstrip line with periodically perforated ground metal, a miniaturized 17 ${\Omega}$ power divider was fabricated. The line width of the power divider was 20 ${\mu}m$, and the size of it was 0.110 $mm^2$, which is 21 % of conventional one. The power divider exhibited good RF performances from 10 to 20 GHz.

• Journal of the Optical Society of Korea
• /
• v.12 no.3
• /
• pp.205-209
• /
• 2008

We demonstrated a simple way of evaluating the duty cycle error in periodically polled lithium niobate(PPLN) based on the method of binary phase diffraction grating. To demonstrate this method, -Z face etched PPLN of desired periods were fabricated by the standard electric field poling technique. The etched PPLN was considered as a surface-relief binary phase grating. The diffraction patterns were recorded for different spatial locations along the length of the sample. The experimentally observed efficiencies of the diffracted orders were compared with the theoretically calculated values to estimate the duty cycle error.

• Journal of the Korean Ceramic Society
• /
• v.47 no.5
• /
• pp.430-432
• /
• 2010

We verified through a noncritical phase-matched second-harmonic generation experiment that the periodically-poled $LiNbO_3$ (PPLN) had a large effective nonlinear optical coefficient, demonstrating that the QPM grating was uniform throughout the entire length of PPLN. The quasi-phase matching temperature was $193.4^{\circ}C$. The maximum SHG output power at the fundamental power of 2.0 W was found to be 18.0 mW; generated second-harmonic beam was found to have no photorefractive effect.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.4
• /
• pp.217-221
• /
• 2016

In this work, open and short stubs that were fabricated on the silicon substrate and for which the periodically arrayed grounded-strip structure (PAGS) was employed were studied along with their basic RF characteristics for an applicability regarding the RF-matching components. The PAGS-employing open and short stubs showed losses that are much lower than that of the conventional stub on the silicon substrate. Concretely, the Q values of the open and short stubs are 9 and 10.2, respectively, while the Q value of the conventional open stub is 2.5. With the use of the PAGS-employing open and short stubs, a highly miniaturized harmonic-rejection filter was also fabricated on the silicon substrate. The filter exhibited a comparatively sound harmonic-suppression characteristic at n × 13 GHz, and its size is 0.1 mm², which is only 7% of the size of the conventional filter on the silicon substrate.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.84-87
• /
• 2005

This study is aimed to compare the insertion losses of periodically folded barriers which have same folded width, depth and period of arrangement but different direction of arrangement. One is vortical to the roadside and another is parallel. The pressure levels and the insertion losses at the receiving points behind finite length barriers are measured in an anechoic room by scale model test. The measured insertion losses are compared with calculated insertion losses by 3D BEM models.

• Journal of electromagnetic engineering and science
• /
• v.3 no.1
• /
• pp.67-71
• /
• 2003

In this paper, frequency modulated(FM) reflectometry is proposed to measure group velocity of microwave transmission line Various microwave transmission lines such as periodically loaded conducting posts in a waveguide and nonradiative dielectric(NRD) guide are adopted to measure their group velocity The result compared with that from network analyzer shows good agreement, indicating the validity of our measurement method.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.323-326
• /
• 1998

The paper describes a theoretical and experimental study on the speed of the torsional elastic waves propagating in an axisymmetirc waveguide whose cross-sectional area varies periodically as an harmonic function of the axial coordinate. The approximate solution of the phase speed has been obtained using the perturbation technique for sinusoidal modulation of small amplitude. The experiment verifying the theoretical result consists of transmitting and receiving torsional waves by magnetostriction and measuring the wave speed in the waveguides with threaded surfaces.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.737-742
• /
• 2000

The paper describes a theoretical study on the flexural vibration of an elastic rectangular plate with periodically nonuniform material properties. The approximate solution of the natural frequency and mode shape has been obtained using the perturbation technique for sinusoidal modulation of the flexural rigidity and mass density. It has been shown that distributed modes exist in the plate which is a two-dimensional model of the flat panel speaker.