• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.45-50
• /
• 2013

In this study, lumped-vortex element method and thin airfoil theory were used to analyze aerodynamic characteristics of airfoils with relative motion that had camber lines of NACA $44{\times}{\times}$ airfoil in 2-dimensional unsteady incompressible potential flow. Velocity disturbance due to airfoil was calculated by lumped-vortex element model and force distribution on airfoil by unsteady Bernoulli's equation. Variables in relative motion were considered the period p, the amplitude of flapping $A_f$ and pitching $A_p$, and the phase difference between flapping and pitching ${\phi}_p$ and the angle of attack ${\alpha}$. Due to movement of an airfoil, dag was induced in 2-dimensional unsteady incompressible potential flow. The numerical results show that the aerodynamic characteristics of the airfoil with flapping and pitching at the same time are illustrated. Especially the mean lift coefficient became smaller, but drag coefficient became larger.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.1
• /
• pp.98-107
• /
• 2017

Electric components equipped with naval shipboards must endure mechanical shock caused by various mechanical impulsive sources. Thus the components must be designed carefully and reliability test is an essential procedure before use. In this study, a new design technology applicable to a large and heavy shock generation system which can generate various specific real mechanical shocks in specified time domain was introduced. Commonly, the shock transmitted through the wall of naval shipboard consists of dual shocks. The primary shock is of a very high amplitude and very short period half-sine form. The following shock is of an exponentially decaying harmonic form of relatively longer period. Based on the different dynamic characteristics of two shocks, we proposed a sequential design procedure to determine spring and damping coefficients of the generation system. Some numerical simulation results showed the feasibility of the proposed method.

• Economic and Environmental Geology
• /
• v.28 no.2
• /
• pp.165-176
• /
• 1995

Dongrae is one of the most famous hot spring resort area in the Republic of Korea. The water temperature ranges $50^{\circ}C{\sim}66$. The chemical composition of the thermal water is quite different from normal groundwater. $Na^+$ and $Cl^-$ are the main components, measured more than 75%, $Ca^{+{+}}$ is contained about 22% and the other ions such as $SO_4$ or $HCO_3$ are the minor components. The heat source is uprising along the fracture zone of granite which is indicated as a subsurface high temperature belt. During the research period of 1991~1992, the groundwater table was lowered down to the depth of about 100 m according to continuous increase of daily use of thermal water. The groundwater table was fluctuated with an amplitude of day, weak or seasion. The groundwater table was the lowest at 18:00 h in a day and also lowest at the weekend for the week period. There was a relavent relationship between drawdown and the amount of thermal water use on a long term base. To protect such a rapid drawdown of groundwater table, Dongrae resort area is now asked to take strong municipal control for the daily use of thermal water.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.5
• /
• pp.575-586
• /
• 1999

The size-resolved number concentrations of aerosols ranging from 0.3 to 25 $mu extrm{m}$ were observed in Seoul and Anmyondo in the west coast of Korea during an Yellow Sand phenomenon in April 1998. Number size distributions of aerosols observed in both places are characterized by decrease in small particles of diameter less than 1${\mu}{\textrm}{m}$ and increase in large size between 1.35 and 10${\mu}{\textrm}{m}$ in heavy dust period. For particles in this size range, there was a good correlation between number concentrations observed in both places during the Yellow Sand episode. On the other hand, the number of small particles less than 0.82${\mu}{\textrm}{m}$ decreased, but the correlation between these particles in both places was enhanced during more intense dust period. The number of coarse particle larger than 10 ${\mu}{\textrm}{m}$ showed a distince diurnal variation without a significant change in amplitude, which was more visible in Seoul. It suggests that these coarse particles were more affected by local sources. Form these results, it was range of 1~10${\mu}{\textrm}{m}$ originated possibly from the dust source regions and the source signature depended on the degree of dust intensity.

• Journal of Navigation and Port Research
• /
• v.36 no.9
• /
• pp.729-735
• /
• 2012

The primary wave energy conversion by a three-dimensional bottom-mounted oscillating water column (OWC) wave power device in regular waves has been studied. The linear potential boundary value problem has been solved following the boundary matching method. The optimum shape parameters such as the chamber length and the depth of the front skirt of the OWC chamber obtained through two-dimensional numerical tests in the frequency domain have been applied in the design of the present OWC chamber. Time-mean wave power converted by the OWC device and the time-mean second-order wave forces on the OWC chamber structure have been presented for different wave incidence angles in the frequency-domain. It has been shown that the peak period of $P_m$ for the optimum damping parameter coincides with the peak period of the time.mean wave drift force when ${\gamma}=0$.

• Ocean Systems Engineering
• /
• v.12 no.1
• /
• pp.23-38
• /
• 2022

In this paper, a pitch-type wave energy converter (WEC-rotor) is investigated in irregular wave conditions for the real sea testing at the west coast of Jeju Island, South Korea. The present research builds on and extends our previous work on regular waves to irregular waves. The hydrodynamic characteristics of the WEC-rotor are assessed by establishing a quasi-two-dimensional numerical wave tank using computational fluid dynamics by solving the Reynolds-averaged Navier-Stokes equation. The numerical solution is validated with physical experiments, and the comparison shows good agreement. Furthermore, the hydrodynamic performance of the WEC-rotor is explored by investigating the effect of the power take-off (PTO) loading torque by one-way and two-way systems, the wave height, the wave period, operational and high sea wave conditions. Irrespective of the sea wave conditions, the absorbed power is quadratic in nature with the one-way and two-way PTO loading systems. The power absorption increases with the wave height, and the increment is rapid and mild in the two-way and one-way PTO loading torques, respectively. The pitch response amplitude operator increases as the wave period increases until the maximum value and then decreases. For a fixed PTO loading, the power and efficiency are higher in the two-way PTO loading system than in the one-way PTO loading system at different wave periods.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.53-57
• /
• 1990

This paper propose Constant Frequency CR-PWM VSI. In which ON/OFF output of Hystersis comparator, which compares the amplitude of reference current with that of actual current, control the switching elements with a constant sampling period of $\mu$-processor. Speed control system of BLDCM driven by controller wi th CF CR - PWM VSI was built.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.981-982
• /
• 1998

We fabricated sampled fiber grating by double-exposure method. First, a short-period grating was written into the hydrogen-loaded single mode fiber and then the refractive index was modulated over it by an amplitude mask. It was observed that several transmission dips appear due to the index modulation. The thermal and strain responses were measured over $40-180^{\circ}C$ and $0-1800\mu\varepsilon,$ respectively. The dips have the same and linear sensitivity to both physical quantities over the range of measurement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.199-202
• /
• 1998

Power capacitors are highly reliable equipment due to their completely enclosed configuration. Aging diagnosis system using partial discharge(PD) and acoustic emission(AE) is being highlighted as a research area for degradation of power capacitors. Their dielectric strength can be however reduced due to some stresses such as over-voltage or thermal degradation of the insulation material during their long period of operation. In this paper, it has been developed to express the AE of the EVENT(average amplitude) and HIT(pulse count) according to the source location. And real time measurement of PD signals for aging diagnosis of power capacitors.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.10a
• /
• pp.37-44
• /
• 1999

Spectral characteristic of Kyeongju earthquake occurred on the June 2, 1999 with magnitude 3,4 is analyzed. It is guessed that the stress energy release of source within relatively short period caused the ground near the epicenter to vibrate with large amplitude for the magnitude and predominantly high frequency. The cumulative absolute velocity and average spectrum acceleration are 0.034 gsec and 0.118g, respectively lower than threshold values of potential earthquake damage which is consistent with the investigation of damage in field. The analysis of the acceleration records of Kyeongju earthquake shows the need to develop the ration criterion for the determining the operating basis earthquake of nuclear power plant.