• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.881-885
• /
• 2018

In order to develop a gas circuit breaker (GCB), the breaking performance of the short line fault (SLF) should be prioritized over that of the breaker terminal fault (BTF). In brief, it is necessary to evaluate the thermal characteristics of the insulating gas that is filled in a GCB. In the process of developing a GCB, many companies use the simplified synthetic testing facility (SSTF).In order to evaluate the SLF breaking performance of a GCB with a long minimum arcing time, a modifications to the conventional SSTF was proposed. In this study, we developed the SSTF with a modified transient recovery voltage circuit. The performance of the newly developed SSTF was verified by an $L_{90}$ breaking performance test on a rating combination of 170 kV, 50 kA, and 60 Hz.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.107-112
• /
• 2011

A comparison study between two performance testing results, one is on the site calibration not needed and the other is needed, was proceeded for the understanding on the effect of site calibration on the complex terrain. As a result, it is revealed that all of uncertainty components is effected by the topographical features dramatically. And the maximum difference of uncertainty reached at around 8% of rated capacity of wind turbine. So, the site calibration is an effective method to remove the variable wind effect by the ground complexity and must be proceeded before the power performance testing of a wind turbine.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.6
• /
• pp.885-891
• /
• 2017

The energy storage system(ESS) is a core component for exchanging the power system structure of the unidirectional power flow into a bidirectional structure. Its important role has been increasing because it has multiple functions such as output stabilization of new renewable energy, demand management, frequency regulation, etc. However, the performance evaluation technology of ESS in korea is lower than one of advanced countries and the recognition of standardization is also lack compared to advanced countries. Furthermore, in order to more accurately and reliably validate the performance of the ESS in advanced countries, it has been required to perform not only performance testing by H/W devices but also performance verification by S/W tool. Therefore, in order to verify the performance testing of ESS by S/W tool, this paper proposes the modeling method of performance testing devices for MW scaled ESS by using the PSCAD/EMTDC S/W, based on real testing devices in domestic institute. From the simulation results of proposed modeling method, it is confirmed that the proposed modeling method is a useful tool for performance validation of ESS.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.651-654
• /
• 2003

Non-destructive testing is essential in the inspection of alteration, repair and new construction in construction industry. This paper is to evaluate the strength variation of fire damaged concrete by non-destructive testing. Furthermore, It is to infer the recovery degree of residual strength of fire-damaged concrete. For this purpose, researchers are exploring the performance of non-destructive testing method using ultrasonic testing and Schmidt hammer in concrete specimens. Testing is performed four-times: before fire test, directly after fire test, after 20 days and after 60 days.

• The Korean Journal of Ceramics
• /
• v.4 no.4
• /
• pp.382-386
• /
• 1998

titanate and a silicon carbide/zirconium diboride particulate composite have each been blended with thermoplastic of aqueous binders and extruded. The green extrudates have diameters ranging between 50 and 150 ㎛ and polyethylene-base 150 ${\mu}m$ diameter fibers can be drawn down at elevated temperature to approximately 40 ${\mu}m$ diameter. Hollow fibers with 150${\mu}m$ outer and 90 ${\mu}m$ inner diameter can also be fabricated. Green fibers have been processed into chopped fiber felts for use as gas distributors/current collectors in an experimental solid oxide fuel cell (SOFC) and the first attempts at producing simple textile structures have been successful. The fibers, tubes and felts have been successfully debound and sintered and characterization of the sintered PSZ fibers, for example, has revealed a density in excess of 99% and tensile failure stresses up to 1.0 GPa for 78 ${\mu}m$ diameter fibers.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.4
• /
• pp.51-58
• /
• 2013

A study on power performance testing of a wind turbine which has no met-mast at a distance of 2~4 rotor diameter was carried out using the Nacelle Transfer Function, NTF, according to IEC 61400-12-2. The wind data for this study was measured at HanKyoung wind farm of Jeju Island. The NTF was modeled using the correlation between wind speeds from the met-mast and from the wind turbine nacelle within 2~4 rotor diameter from the met-mast. The NTF was verified by the comparison of estimated Annual Energy Productions, AEPs, and binned power curves. The Nacelle Power Curve, NPC, was derived from the nacelle wind speed data corrected by NTF. The NPC of wind turbine under test and the power curve offered by the turbine manufacturer were compared to check whether the wind turbine is properly generating electricity. Overall the NPC was in good agreement with the manufacturer's power curve. The result showed power performance testing for a wind turbine which has no met-mast at a distance of 2~4 rotor diameter was successfully carried out in compliance with IEC 61400-12-2.

• Communications for Statistical Applications and Methods
• /
• v.11 no.3
• /
• pp.475-484
• /
• 2004

This paper consider the testing problem of grouped heteroscedasticity in the linear regression model. We provide the Lagrange Multiplier(LM), Wald, Likelihood Ratio (LR) test statistis for testing of grouped heteroscedasticity. Monte Carlo experiments are conducted to study the performance of these tests.

• Journal of the military operations research society of Korea
• /
• v.24 no.2
• /
• pp.57-74
• /
• 1998

This paper is aimed to propose an testing and evaluation strategy and plan in Military Information Systems, especially focusing on development an“New-generation Wargame Model”. Through this research, we concluded that the effective and efficient testing/evaluation strategy/plan can aid the productivity, maintainability, availability, etc., of the Militray Information Systems. Highlights of the proposed testing and evaluation strategy and plan for Military Information Systems are as follows. First, in the unit and module integration testing phase, hybrid of black-box and white-box testing techniques are available for Military Information Systems and progressive approach for module integration phase should be considered because of the complexity. Second, in the system testing phase, integrated module should be tested with respect to the function and performance that should be satisfied with the user requirements, specifications, risk analysis, etc., Third, in the acceptance testing phase, reliability, interoperability, maintainability, availability, integrity, etc., must be considered in the actual or mini-operational environments for testing efficiently and effectively.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.1
• /
• pp.29-38
• /
• 2010

It is highly requested that the more complicated embedded software is used for high performance and multiple functions of the systems. This is inevitably increasing the errors. Therefore the embedded software testing is getting important recently. There are not general testing methods which are able to be applied for any embedded systems, but via this research, we introduce a testing method which is based on TTCN-3, a testing standard, for embedded systems. A testing environment for network-based embedded software is implemented with considering the features of TTCN-3 testing which is based on message exchange. The testing environment has two additional parts with TTCN-3 test system, the network analyzer to access the network-based systems and the communication interface which is suggested for embedded systems in previous work, and we have implemented the whole testing environment with interacting these two parts. In addition to the normal testing domain, called single node testing as a unit testing of V-model, we suggest another concept to test multiple nodes in network. It could be achieved by adding keywords such as supervisor and object which are describing the feature of TTCN-3 testing component and generating the TTCN-3 Executable code which contains new keywords. The testing has done for embedded software which is based on CAN network and the demonstration of the testing environment has been shown in this paper.

• Journal of Korean Society for Quality Management
• /
• v.48 no.3
• /
• pp.395-408
• /
• 2020

Purpose: This study was performed for advancement of aviation security equipments certification system. Methods: We investigated aviation security equipments certification-related registrations and the latest research trends of explosive detection technologies. Based on the literature studies, we draw the critical issues of the aviation security equipment certification system and suggested improvement direction. Results: We found some inaccuracies of the definition of explosive trace detection equipments, accreditation review committee, and performance evaluation test method. These problems should be modified to suit being practical. Conclusion: The present results would be useful for basic data for modifying aviation security equipments certification systems.