• Journal of Biomedical Engineering Research
• /
• v.27 no.1
• /
• pp.30-37
• /
• 2006

Injecting currents into an electrically conducting subject, we may measure the induced magnetic flux density distributions using an MRI scanner. The measured data are utilized to reconstruct cross-sectional images of internal conductivity and current density distributions in Magnetic Resonance Electrical Impedance Tomography (MREIT). Injection currents are usually provided in a form of mono-polar or bi-polar pulses synchronized with an MR pulse sequence. Given an MRI scanner performing the MR phase imaging to extract the induced magnetic flux density data, the current source becomes one of the key parts determining the signal-to-noise ratio (SNR) of the measured data. Since this SNR is crucial in determining the quality of reconstructed MREIT images, special care must be given in the design and implementation of the current source. This paper describes a current source design for MREIT with features including interleaved current injection, arbitrary current waveform, electrode switching to discharge any stored charge from previous current injections, optical isolation from an MR spectrometer and PC, precise current injection timing control synchronized with any MR pulse sequence, and versatile PC control program. The performance of the current source was verified using a 3T MRI scanner and saline phantoms.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.390-396
• /
• 2021

In this research, design and fabrication of marine repeater capable to extend communication coverage in monitoring system of fishing gear automatic identification, which is one of implementation method of the real-name electric fishing gear system declared by Ministry of Oceans and Fisheries in 2016, is reported. The proposed marine repeater is fabricated in a form of RF repeater with interference cancellation system (ICS), which can cancel the oscillation due to feedback signal between service antenna and link antenna. In design process, we secure the isolation of 30 dB between service antenna and link antenna. It is confirmed that when the level of feedback signal into repeater input be lower of 15 dB than repeater gain, error vector magnitude due to oscillation can be lower than the performance criterion of 6%, from the test verification. It is expected that the service coverage will be extended by applying the developed marine ICS RF repeater into marine IoT network including monitoring system of fishing gear automatic identification.

• Korean Journal of Pharmacognosy
• /
• v.50 no.2
• /
• pp.148-153
• /
• 2019

The lignan compound of Schisandra chinensis Baill. (Schizandraceae) has been reported to have a variety of biological activities such as liver protection, neuroprotection, anti-oxidant and anti-diabetes. In this study, we investigated a quantitative analytical method for schisandrin, gomisin A and gomisin $M_2$ isolated from S. chinensis by high-performance liquid chromatography-ultraviolet spectroscopy (HPLC-UV). The isolated compounds were identified by the analysis of 1H- and 13C-NMR spectroscopic data. The results showed that calibration curves of three compounds indicated great linearity with a correlation coefficient ($R^2$) of schisandrin 0.9983, gomisin A 0.9982 and gomisin $M_2$ 0.9986. The limits of detection (LOD) of schisandrin, gomisin A and gomisin $M_2$ were 0.14, 0.07 and $0.05{\mu}g/ml$ and the limits of quantification (LOQ) were 0.42, 0.22 and $0.14{\mu}g/ml$. Intra-day and inter-day precisions of schisandrin were 0.40~1.44%, 0.07~1.02% gomsin A were 0.22~0.52%, 0.10~0.63%, gomisin $M_2$ were 0.40~0.99%, 0.81~2.88%. In result, contents of schisandrin, gomisin A and gomisin $M_2$ in ethanol extract of S. chinensis were $25.95{\pm}0.15$, $2.51{\pm}0.02$ and $2.17{\pm}0.07mg/g$.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1092-1095
• /
• 2019

In this paper, we propose the development of an embedded board for construction of smart factory. The proposed embedded board for construction of smart factory consists of main module, ADC module, I/O module. Main module is a main calculating device which includes communication pard that allows interface with external device with using industrial protocol and is ported operating system makes board operating into. ADC module takes part in transferring digital signal has converted from electrical signal to the main module from the external sensor which is installed on the field. I/O module is an input and output module which transfers to the main module about a status, alarm, command signal of field device and it has a function that blocks external noises from field device with isolation circuit into it. In order to evaluate the performance of the proposed embedded board for construction of smart factory, it has been tested by an authorized testing institute. As a result, quantity of interacting protocol was 5, speed of hardware clock synchronization was under 10us and operating time of battery without source power was over 8 hours. It produced the same result as the world's highest level.

• International Journal of Computer Science & Network Security
• /
• v.21 no.11
• /
• pp.81-88
• /
• 2021

The presented scientific research substantiates the principles of the mechanism of the investment resources involvement in order to introduce innovations at enterprises in the context of digitalization using a resource-functional approach. The importance of attracting investment resources, which contributes to the modernization of production systems, the creation of a stable economic field of development of economic entities, is justified. The expediency of application of the resource-functional approach on research of the mechanism of attraction of investment resources for introduction of innovations at the enterprises in the conditions of digitalization is proved. The investment process is presented in the form of a chain of interdependent processes which include: attraction of investment resources, investments, increase of investment value, profit. It is proved that the mechanism of attracting investment resources for the introduction of innovations in enterprises in the context of digitalization cannot be considered in isolation from the process, due to the fact that the mechanism is aimed at performing specific functions. The functions of the mechanism include management, complex, coordination, monitoring, performance and control functions. Functions of the mechanism of attraction of investment resources for introduction of innovations at the enterprises in the conditions of digitalization are caused by the purposes of attraction of investment resources for innovative development; the presence of an objective nature; relative independence and homogeneity; implementation of functions in the process of investing in innovative activities of the enterprise.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.8
• /
• pp.541-550
• /
• 2022

An effective real time fault diagnosis approach for UAV engine is drawn from IMM filter and GLRT methods. For this purpose based on the linear diagnosis model derived from engine dynamic performance analysis the Kalman filter for residual estimation and each method are applied to the fault diagosis of the actuator for engine control sensors. From the process of the IMM filter application the effective FDI measure is obtained and the state responses due to actuator fault are estimated. Likewise from the GLRT method the fault magnitudes of actuator and sensors are estimated associated with some FDI functionings. The numerical simulations verify the effectiveness of the IMM filter for FDI and the GLRT in estimating the fault magnitudes of each fault mode.

• Korean Journal of Schizophrenia Research
• /
• v.23 no.1
• /
• pp.29-37
• /
• 2020

Objectives: This study aimed to investigate the characteristics of early maladaptive schemas and their associations with clinical symptoms in patients with schizophrenia. Methods: Forty-eight patients with schizophrenia, 49 patients with major depressive disorder, and 50 healthy controls completed the Young Schema Questionnaire and symptom measures including the Brief Psychiatric Rating Scale-Expanded (BPRS-E). Results: The schizophrenia group had significantly higher scores than the healthy controls and lower scores than the depression group in most schemas. Compared with healthy controls, the schizophrenia group exhibited higher scores in 10 schemas, i.e., mistrust, social isolation, failure, dependence, vulnerability to harm, enmeshment, insufficient self-control, subjugation, emotional inhibition, and negativity schemas (all p<0.001). Moreover, vulnerability to harm, enmeshment, subjugation, and negativity schemas were correlated with total scores of the BPRS-E (0.37≤r≤0.43, all p<0.05). Regarding the five BPRS domains, emotional deprivation schema showed significant relationships with negative (r=0.50, p=0.005) and disorganization (r=0.39, p=0.033) symptoms, while no schemas showed correlations with positive symptoms. Conclusion: These results suggest that most schemas in patients with schizophrenia pertain to impaired autonomy and performance as well as disconnection and rejection domains and may improve our understanding and the treatment of schizophrenia from a perspective of schema therapy focused on these domains.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.29 no.1
• /
• pp.43-51
• /
• 2023

Purpose: To accommodate the increasing number of patients during the COVID-19 pandemic, numerous portable HEPA filter units (PHUs) were installed in the general wards of existing medical facilities(EMFs) to convert them into emergency conversion facilities (ECFs). The purpose of this study was to build a dataset in preparation for emerging infectious diseases in the post-COVID-19 era by analyzing the construction and operation of ECFs. Methods: Field investigations were conducted during ECF operation periods based on the analysis of heating, ventilation, and air conditioning (HAVC) system design documents for six ECFs across Korea. Interviews were conducted with facility managers during the field investigations. Results: When constructing an ECF within an EMF, the installation status and characteristics of the existing system should be considered. Field investigations and verifications of the operation of HAVC systems must be conducted beforehand for smooth ECF operations. If heating and cooling are required with indoor air circulation type equipment in an ECF zone, the implementation of a heating and cooling method that can satisfy the comfort requirements of the occupants while minimizing cross-contamination is essential. When using PHUs that do not meet the performance standards required by medical equipment, the noise level resulting from such equipment operation must be evaluated and improved. Implications: For EMFs, various guidelines that can be referred to for the construction and operation of ECFs must be developed to prepare for emerging infectious diseases in the future.

• Journal of Space Technology and Applications
• /
• v.2 no.3
• /
• pp.187-194
• /
• 2022

Although the magnitude of the disturbance caused by the driving of the motor operated to secure the high-speed and precise directivity of the antenna is small, it acts as a major cause of impairing the image quality of the observation satellite, which requires precision directing performance. In order to acquire high-resolution image information through the improvement of the high-resolution observation satellite, proper vibration isolation and reduction design are required so that jitter generated when the directional antenna motor is driven is not transmitted to the main mission equipment. In this paper, the development process of the directional antenna vibration reduction device applied to real satellites and the effect of micro vibration reduction before and after application will be examined. This device was designed as a way to significantly improve the jitter problem by replacing only one gear in the directional antenna driving unit with a spring damper gear without any additional interface equipment. It was first applied and launched to a high-resolution earth observation satellite, and has been successfully operated so far.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.6
• /
• pp.680-690
• /
• 2022

Vibrations in the pipe system trigger fatigue-related issues and lead to fatal other problems caused by pipe damage. There are numerous studies to analyze and reduce the cause of pipe vibration, among which a small number of studies are being conducted on pipe vibration reduction using friction supports. The study of friction supports, however, focused only on predicting and evaluating the performance of the friction supports and seldomly considered the design perspective of the install location of the supports. Therefore, this study intends to suggest the optimization process for finding the best installation region of friction support to attenuate the vibration of entire piping system. The optimal position of the friction support is predicted only by linear analysis to guarantee optimization efficiency in the design process. The designed friction support location is verified by time domain analysis.