• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.6
• /
• pp.6-11
• /
• 2010

Amount of power generated from solar photovoltaic can vary according to solar flux of sunlight due to nature of solar cell panel, and an angle that the sun and the surface of cell makes brings difference in amount of power generation. Solar flux is decided by location of surface of the Earth that is classified into longitude and latitude, but on the other hand, an angle that the sung and the surface of cell makes can be changed by changing the angle of a solar power generation device at the fixed location. A method of changing the angle of a solar power generation device as a measure for improving practical power generation efficiency. and studies about a solar tracking device for this are in active. This study conducted a research on a solar tracking system for improvement of solar power generation efficiency. A solar tracking system of this study is composed of a sensor part to confirm a location of the sun with a semiconductor photosensor using the photo conductive effect, and it analyzed output signal of a sensor by using microprocessor and it produced a control signal of driving part for tracking the sun. A solar power generator (25W) was produced to analyze performance of a solar tracking system and usefulness of a solar tracking device that was designed and produced in this study was confirmed through experiments.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.221-231
• /
• 2013

Exchanging personal health information(PHI) is an essential process of healthcare services using information and communication technology. But the process have the inherent risk of information disclosure, so the PHI should be protected to ensure the reliability of healthcare services. In this paper, we designed encryption module for wearable personal health devices(PHD). A main goal is to guarantee that the real-time encoded and transmitted PHI cannot be allowed to be read, revised and utilized without user's permission. To achieve this, encryption algorithms as DES and 3DES were implemented in modules operating in Telos Rev B(16bit RISC, 8Mhz). And the experiments were performed in order to evaluate the performance of encryption and decryption using vital-sign measured by PHD. As experimental results, an block encryption was measured the followings: DES required 1.802 ms and 3DES required 6.683 ms. Also, we verified the interoperability among heterogeneous devices by testing that the encrypted data in Telos could be decoded in other machines without errors. In conclusion, the encryption module is the method that a PHD user is given the powerful right to decide for authority of accessing his PHI, so it is expected to contribute the trusted healthcare service distribution.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.3
• /
• pp.173-182
• /
• 2013

The building design projects which are being proceeded nowadays pursue a complex and various shape of structures, escaping from the traditional and regular shape of buildings. In this new trend of the architecture, there rises a demand of the research in the structural engineering for the effective realization of such complex-shaped buildings which disassembles the orthogonality of frames. As a distinguished characteristics of the buildings in a complex-shape, there frequently are inclined columns included in the structural frame. The inclined column causes extra axial force and bending moment at the beam-column connection so it is necessary to assess those effects on the structural behavior of the frame and the connection by experiment or analysis. However, with comparing to the studies on the normal beam-column connections, the inclined column connections have not been studied sufficiently. Therefore, this study evaluated the beam-column connections having an inclined column using nonlinear and finite element analysis method. In this paper, steel moment frames having inclined columns were analyzed by the nonlinear pushover analysis to check the global behavior and beam-column connection models were analyzed by the finite element analysis to check the buckling behavior and the fracture potentials.

• Korean Journal of Health Education and Promotion
• /
• v.22 no.4
• /
• pp.17-40
• /
• 2005

Objective: The purpose of the this study was to test the effect of the alcohol preventive educational program for elementary school students through developing the web-based learning instruments. It will prevent the serious alcohol problem for adolescents and be the opening-learning according to learner's needs beyond the traditional classroom learning which has limitation of space and time. Method: This research designed based on web-based instructional system design by In-sung Jong(1997). This study was performed on the elementary school students who are the six grade in M city. The number of experimental group was 72 and control group's number was 72, totaled 144. Data were collected from September, 30th, 2004 to November, 5th, 2004, totaled 37days. The pretest and the posttest for web-based alcohol preventive education program were tested about knowledge and attitudes toward drinking. After the performance, the posttest was also tested the effect of this program under items by the interest of web-based learning, satisfaction, adequateness of material and so on. The data analysis was done using SPSS/Win 11.0 program. Result: The results of this study are as follows: 1) Compared with control group, experimental group which was educated the web-based alcohol preventive educational program for elementary school students was improved the knowledge on drinking, thin there was no significant difference. However, it showed significant difference between two groups after education. It was, therefore, partially supported. 2) Compared with control group, the experimental group which was educated the web-based alcohol preventive educational program for elementary school students showed significant difference in attitudes toward drinking. After education, it showed no significant difference attitudes. toward drinking between experimental group and control group. It was, therefore, partially supported. 3) The degree of learning motivation was an average.595 of 1 after learning applied to by the web-based alcohol preventive educational program for elementary school students. Then, it is relatively more higher than the result of existing studies. So, it showed that the motivation was done well. 4) Correlation among study variables It showed that there was the significantly positive correlation between knowledge and attitudes toward drinking of pretest experimental group. Also, there was the significantly positive correlation between attitudes toward drinking and learning motivation of pretest and posttest experimental group. Conclusion: I found that the web-based educational program helps the elarning process for the health education in the school field which the instructional materials lack. As a result, the web-based education motivates the learner's pleasure and promotes the learners interest. Also, it is possible for students to learn according to their own learning pace, repeated learning and active learning participation in the necessary parts. Therefore, I think the web-based educational program is worth as a intervention to get positive influence for the health education.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.486-491
• /
• 2008

This paper describes a model identification method that has been applied to a commercial 12-inch RTP (rapid thermal processing) equipment with an ultimate aim to develop a high-performance advanced controller. Seven thermocouples are attached on the wafer surface and twelve tungsten-halogen lamp groups are used to heat up the wafer. To obtain a MIMO balanced state space model, multiple SIMO (single-input multiple-output) identification with highorder ARX models have been conducted and the resulting models have been combined, transformed and reduced to a MIMO balanced state space model through a balanced truncation technique. The identification experiments were designed to minimize the wafer warpage and an output linearization block has been proposed for compensation of the nonlinearity from the radiation-dominant heat transfer. As a result from the identification at around 600, 700, and $800^{\circ}C$, respectively, it was found that $y=T(K)^2$ and the state dimension of 80-100 are most desirable. With this choice the root-mean-square value of the one-step-ahead temperature prediction error was found to be in the range of 0.125-0.135 K.

• The Journal of Korean Academy of Sensory Integration
• /
• v.6 no.1
• /
• pp.35-46
• /
• 2008

Objective : This study verifies the effects of sensory integrative (SI) therapy on vestibular- and proprioceptive sensory (BPS) processing ability of a child with Asperger Syndrome (AS). Method : A boy who is 11 years and 2 months old took the Functional Independence Measure for Children (Wee-FIM), Canadian Occupational Performance Measure (COPM), Short Sensory Profile, Bruininks-Oserestky Test of Motor Proficiency-2 (BOT-2), and Test of Playfulness (ToP) for the baseline. The child participated in 3 evaluation sessions and 8 therapy sessions based on the AB research design. Duration of each session is 50 min and the therapy session is divided into 40 minutes for treatment and 10 minutes for evaluation. Since the vestibular sense and proprioception build up one's ability of postural control, several tests were employed to evaluate the child' postural control as outcome measure; distance from front leg of chair to heel of the child with sitting (C-H distance), angle between trunk and thigh (hip joint angle) with sitting, and the 'prone-extension posture' which is a subtest of Clinical Observation of Motor and Postural Skill (COMPS) to examine postural control embodied with integration of reflex and BPS processing. Result : During the therapy, average data of the C-H distance is decreased from 27.33cm to 11.69cm, average data of the hip joint angle is also decreased from $43.3^{\circ}$ to $20^{\circ}$, and average time for the prone-extension posture is increased from 13.15seconds to 24.84seconds. Conclusion : This result indicates that the ability to postural control in sitting and to maintain the prone-extension posture can be improved by sensory integrative therapy, with enhanced BPS processing.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.164-173
• /
• 2014

In underwater robotics, vision would be a key element for recognition in underwater environments. However, due to turbidity an underwater optical camera is rarely available. An underwater imaging sonar, as an alternative, delivers low quality sonar images which are not stable and accurate enough to find out natural objects by image processing. For this, artificial landmarks based on the characteristics of ultrasonic waves and their recognition method by a shape matrix transformation were proposed and were proven in Part 1. But, this is not working properly in undulating and dynamically noisy sea-bottom. To solve this, we propose a framework providing a selection phase of likelihood candidates, a selection phase for final candidates, recognition phase and tracking phase in sequence images, where a particle filter based selection mechanism to eliminate fake candidates and a mean shift based tracking algorithm are also proposed. All 4 steps are running in parallel and real-time processing. The proposed framework is flexible to add and to modify internal algorithms. A pool test and sea trial are carried out to prove the performance, and detail analysis of experimental results are done. Information is obtained from tracking phase such as relative distance, bearing will be expected to be used for control and navigation of underwater robots.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.2
• /
• pp.161-168
• /
• 2011

The heating, ventilating, air conditioning (HVAC) system is a very important part of an automotive vehicle: it controls the microclimate inside the passenger's compartment and removes the frost or mist that is produced in cold/rainy weather. In this study, the numerical analysis of the defrost duct in an HVAC system and the de-icing pattern is carried out using commercial CFX-code. The mass flow distribution and flow structure at the outlet of the defrost duct satisfied the duct design specification. For analyzing the de-icing pattern, additional grid generation of solid domain of ice and glass is pre-defined for conductive heat transfer. The flow structure near the windshield, streakline, and temperature fields clearly indicate that the de-icing capacity of the given defrost duct configuration is excellent and that it can be operated in a stable manner. In this paper, the unsteady changes in temperature, water volume fraction, and static enthalpy at four monitoring points are discussed.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.100-107
• /
• 2001

A Interior material, a main cause of fire-growth and generating toxic gas when it burns, should be dealt with great care in life safety design. Nonetheless, it has been used recklessly with undue attention to its contribution to fire in particular in entertainment occupancy and causes many victims in fire. Therefore, this study attempts to examine the current use of interior material in Korea and find out what to be improved and enhanced in terms of related regulations. Based on the comparison and analysis of the Korea regulation with those of advanced nations, suggestions are made for an effective and efficient improvement and complement to the current system. What can be suggested from this study are as follows. The use of interior material should be controlled under the unified regulation of fire-safety codes. Code should be set up so that the current construction enforcement should be applied in retroactive to those entertainment buildings that obtained a license prior to the implementation of the system certifying that the building is fire-resistant and fire-protective. The legislation should be made to control the fire-protection facilities of small-sized, underground entertainments. It should be obliged to present the blueprint displaying the use of interior material at the time of changing occupancy. Or, it should be compelled to report changes that go way without permit to the administrative office. A compulsory provision should be set up to have a fire-resistant performance to movable furniture. The classification index designating the fire hazard of interior material by flame spread rate and smoke toxicity and its test method should be established.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.417-423
• /
• 2007

Oxy-gasification or oxygen-blown gasification, enables a clean and efficient use of coal and opens a promising way to CO2 capture. The coal gasification process of a slurry feed type, entrained-flow coal gasifier was numerically predicted in this paper. The purposes of this study are to develop an evaluation technique for design and performance optimization of coal gasifiers using a numerical simulation technique, and to confirm the validity of the model. By dividing the complicated coal gasification process into several simplified stages such as slurry evaporation, coal devolatilization, mixture fraction model and two-phase reactions coupled with turbulent flow and two-phase heat transfer, a comprehensive numerical model was constructed to simulate the coal gasification process. The influence of turbulence on the gas properties was taken into account by the PDF (Probability Density Function) model. A numerical simulation with the coal gasification model is performed on the Conoco-Philips type gasifier for IGCC plant. Gas temperature distribution and product gas composition are also presented. Numerical computations were performed to assess the effect of variation in oxygen to coal ratio and steam to coal ratio on reactive flow field. The concentration of major products, CO and H2 were calculated with varying oxygen to coal ratio (0.2-1.5) and steam to coal ratio(0.3-0.7). To verify the validity of predictions, predicted values of CO and H2 concentrations at the exit of the gasifier were compared with previous work of the same geometry and operating points. Predictions showed that the CO and H2 concentration increased gradually to its maximum value with increasing oxygen-coal and hydrogen-coal ratio and decreased. When the oxygen-coal ratio was between 0.8 and 1.2, and the steam-coal ratio was between 0.4 and 0.5, high values of CO and H2 were obtained. This study also deals with the comparison of CFD (Computational Flow Dynamics) and STATNJAN results which consider the objective gasifier as chemical equilibrium to know the effect of flow on objective gasifier compared to equilibrium. This study makes objective gasifier divided into a few ranges to study the evolution of the gasification locally. By this method, we can find that there are characteristics in the each scope divided.