• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.2032-2041
• /
• 1998

In this work, we propose a novel bit allocation method that is to minimize overall distortions subject ot the bit rate constraint. We partition the original bitallocation problem into 'macroblock level bit allocation' problems that can be solved by conventional Lagrangian mutiplier methods and a 'frame level bit allocation' problem. To tackle the frame level problem, 'two-phase optimization' algorithm is used with iter-frame dependency model. While the existing approaches are almost impossible to find the macroblock-unit result for the moving picture coding system due to high computational complexity, the proposed algorithm can drastically reduce the computational loads by the problem partitioning and can obtain the result close to the optimal solution. Because the optimally allocated results can be used as a benchmark for bit allocation methods, the upper performance limit, or a basis for approximation method development, we expect that the proposed algorithm can be very useful for the bit allocation related works.

• Geomechanics and Engineering
• /
• v.2 no.4
• /
• pp.253-280
• /
• 2010

A new prediction model is derived for the uplift capacity of suction caissons using a hybrid method coupling genetic programming (GP) and simulated annealing (SA), called GP/SA. The predictor variables included in the analysis are the aspect ratio of caisson, shear strength of clayey soil, load point of application, load inclination angle, soil permeability, and loading rate. The proposed model is developed based on well established and widely dispersed experimental results gathered from the literature. To verify the applicability of the proposed model, it is employed to estimate the uplift capacity of parts of the test results that are not included in the modeling process. Traditional GP and multiple regression analyses are performed to benchmark the derived model. The external validation of the GP/SA and GP models was further verified using several statistical criteria recommended by researchers. Contributions of the parameters affecting the uplift capacity are evaluated through a sensitivity analysis. A subsequent parametric analysis is carried out and the obtained trends are confirmed with some previous studies. Based on the results, the GP/SA-based solution is effectively capable of estimating the horizontal, vertical and inclined uplift capacity of suction caissons. Furthermore, the GP/SA model provides a better prediction performance than the GP, regression and different models found in the literature. The proposed simplified formulation can reliably be employed for the pre-design of suction caissons. It may be also used as a quick check on solutions developed by more time consuming and in-depth deterministic analyses.

• Smart Structures and Systems
• /
• v.17 no.6
• /
• pp.957-980
• /
• 2016

Structural damage detection (SDD) is a challenging task in the field of structural health monitoring (SHM). As an exploring attempt to the SDD problem, a hybrid self-adaptive Firefly-Nelder-Mead (SA-FNM) algorithm is proposed for the SDD problem in this study. First of all, the basic principle of firefly algorithm (FA) is introduced. The Nelder-Mead (NM) algorithm is incorporated into FA for improving the local searching ability. A new strategy for exchanging the information in the firefly group is introduced into the SA-FNM for reducing the computation cost. A random walk strategy for the best firefly and a self-adaptive control strategy of three key parameters, such as light absorption, randomization parameter and critical distance, are proposed for preferably balancing the exploitation and exploration ability of the SA-FNM. The computing performance of the SA-FNM is evaluated and compared with the basic FA by three benchmark functions. Secondly, the SDD problem is mathematically converted into a constrained optimization problem, which is then hopefully solved by the SA-FNM algorithm. A multi-step method is proposed for finding the minimum fitness with a big probability. In order to assess the accuracy and the feasibility of the proposed method, a two-storey rigid frame structure without considering the finite element model (FEM) error and a steel beam with considering the model error are taken examples for numerical simulations. Finally, a series of experimental studies on damage detection of a steel beam with four damage patterns are performed in laboratory. The illustrated results show that the proposed method can accurately identify the structural damage. Some valuable conclusions are made and related issues are discussed as well.

• Journal of Korea Port Economic Association
• /
• v.26 no.2
• /
• pp.19-35
• /
• 2010

The purpose of this paper is to develop a benchmark of performance standards for Global Logistics Provider in the merging logistics market. The Data Envelopment Analysis (DEA) can be employed to compare and analyse the efficiencies of Global Logistics Provider(3PL, 4PL). That is because Global Logistics Providers are able to reach the highest level of efficiency by using Logistics institutions and Logistics service systematically. This research is focused on analyzing the efficiencies of top 40 Global Logistics Providers. The framework assumes that the Providers use three inputs to produce one output. The inputs include number of employees information system, and number of warehouses. The output is the annual turnover. The results show that Panalpina, C.H. Robinson Worldwide, Maersk Logistics/Damco, Hub Group, Lander Global Logistics on Global Logistics Providers are the efficient providers. This paper also allows the inefficient DMUs to establish their benchmarking strategies. The strategies are dependent on the assets such as number of employees, information system, and number of warehouses.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.58-64
• /
• 2009

For the success of the reconfigurable computing, the algorithm for mapping operations onto coarse-grained reconfigurable architecture is very important. This paper proposes a resource-aware mapping system for the coarse-grained reconfigurable architecture and its own underlying heuristic algorithm. The operation assignment and the routing path allocation are simultaneously performed with a cycle-accurate time-exclusive resource model. The proposed algorithm minimizes the communication resource usage and the global memory access with the list scheduling heuristic. The operation to be mapped are prioritized with general properties of data flow. The evaluations of the proposed algorithm show that the performance is significantly enhanced in several benchmark applications.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.1
• /
• pp.29-36
• /
• 2015

Base isolation is considered as a seismic protective system in the design of next generation Nuclear Power Plants (NPPs). If seismic isolation devices are installed in nuclear power plants then the safety under a seismic load of the power plant may be improved. However, with respect to some equipment, seismic risk may increase because displacement may become greater than before the installation of a seismic isolation device. Therefore, it is estimated to be necessary to select equipment in which the seismic risk increases due to an increase in the displacement by the installation of a seismic isolation device, and to perform research on the seismic performance of each piece of equipment. In this study, modified NRC-BNL benchmark models were used for seismic analysis. The numerical models include representations of isolation devices. In order to validate the numerical piping system model and to define the failure mode, a quasi-static loading test was conducted on the piping components before the analysis procedures. The fragility analysis was performed by using the results of the inelastic seismic response analysis. Inelastic seismic response analysis was carried out by using the shell finite element model of a piping system considering internal pressure. The implicit method was used for the direct integration time history analysis. In addition, the collapse load point was used for the failure mode for the fragility analysis.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.1
• /
• pp.9-25
• /
• 2014

It is very important to select the best employees who are suitable for their jobs and duties as considering the efficiency and productivity of the firms' performance. As a result, many kinds of selection methodologies and systems have been developed. Among them is the selection system based on the core competencies which is known as the superior selection systems that can increase the predictive validity who is the right people, compared to the traditional selection system based on the job analysis. Hence, the former has been focused in the complex business situation in recent years. In this case study, we examine the selection system case based on the core competencies of OSS team in Company A, which is one of the largest telecommunication firms and we suggest the implications. According to the results of this case study, defining the core competencies of the job and selecting the right people who had the related competencies not only decreased the turnover rate of OSS team in Company A, but also increased the employees' loyalty and satisfaction for the organizations. This study will be a benchmark to other departments that don't use competency selection system of Company A as well as the firms that want to adapt the selection system based on the core competencies. Also, this case study has a contribution that shows us an alternative model how can the firms identify and select the best right employees.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.2
• /
• pp.179-190
• /
• 2010

This paper describes a new stochastic heuristic algorithm in engineering problem optimization especially in power system applications. An improved particle swarm optimization (PSO) called adaptive particle swarm optimization (APSO), mixed with simulated annealing (SA), is introduced and referred to as APSO-SA. This algorithm uses a novel PSO algorithm (APSO) to increase the convergence rate and incorporate the ability of SA to avoid being trapped in a local optimum. The APSO-SA algorithm efficiency is verified using some benchmark functions. This paper presents the application of APSO-SA to find the optimal location, type and size of flexible AC transmission system devices. Two types of FACTS devices, the thyristor controlled series capacitor (TCSC) and the static VAR compensator (SVC), are considered. The main objectives of the presented method are increasing the voltage stability index and over load factor, decreasing the cost of investment and total real power losses in the power system. In this regard, two cases are considered: single-type devices (same type of FACTS devices) and multi-type devices (combination of TCSC, SVC). Using the proposed method, the locations, type and sizes of FACTS devices are obtained to reach the optimal objective function. The APSO-SA is used to solve the above non.linear programming optimization problem for better accuracy and fast convergence and its results are compared with results of conventional PSO. The presented method expands the search space, improves performance and accelerates to the speed convergence, in comparison with the conventional PSO algorithm. The optimization results are compared with the standard PSO method. This comparison confirms the efficiency and validity of the proposed method. The proposed approach is examined and tested on IEEE 14 bus systems by MATLAB software. Numerical results demonstrate that the APSO-SA is fast and has a much lower computational cost.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.9
• /
• pp.281-290
• /
• 2020

The Vision-and-Language Navigation(VLN) task is a complex intelligence problem that requires both visual and language comprehension skills. In this paper, we propose a new learning model for visual-language navigation agents. The model adopts a hybrid learning that combines imitation learning based on demo data and reinforcement learning based on action reward. Therefore, this model can meet both problems of imitation learning that can be biased to the demo data and reinforcement learning with relatively low data efficiency. In addition, the proposed model uses a novel path-based reward function designed to solve the problem of existing goal-based reward functions. In this paper, we demonstrate the high performance of the proposed model through various experiments using both Matterport3D simulation environment and R2R benchmark dataset.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.7
• /
• pp.1900-1906
• /
• 1997

In this paper, the efficient BILBO(named EBILBO) is designed for BIST that is able to batch the testing when circuit is designed on FPGA. The proposed algorithm of batch testing is able to test the normal operation speed with one-pin-count that can control all part of large and complex circuit. PRTPG is used for the test pattern and MISR is used for PSA. The proposed algorithm of batch testing is VHDL coding on behavioral description, so it is easily modified the model of test pattern generation, signature analysis and compression. The EBILBO's area and the performance of designed BIST are evaluated with ISCAS89 benchmark circuit on FPGA. In circuit with above 600 cells, it is shown that area is reduced below 30%, test pattern is flexibly generated about 500K and the fault coverage is from 88.3% to 100%. EBILBO for the proposed batch testing BIST is able to execute concurrently normal and test mode operation in real time to the number of $s+n+(2^s/2^p-1)$ clock(where, in CUT, # of PI;n, # of register, p is order # of polynomial). The proposed algorithm coded with VHDL is made of library, then it well be widely applied to DFT that satisfy the design and test field on sme time.