• Korean Journal of Agricultural Science
• /
• v.43 no.5
• /
• pp.734-741
• /
• 2016

Lily (Lilium davidii) is a high-yielding flowering plant. Besides roses and chrysanthemums, lily bulbs have long been used as food and in oriental medicine. However, the usage and value of cut lily bulbs has not been recognized. A bulb whose yield has been decreased is called a waste bulb, and a large amount of such bulbs is discarded every year. In this study, the functionality of waste bulbs from cut lilies was investigated to explore their potential use as a value-added product. We divided lily bulbs into two groups, one group with six varieties of new bulbs (Medusa, Siberia, Woori Tower, Yelloween, Le Reve, and Morning Star) used for cultivation and the other group with six varieties of waste bulbs (Medusa, Siberia, Woori Tower, Yelloween, Sorbonne, and Sheila). Physiological activities (${\alpha},{\alpha}$-diphenyl-${\beta}$-picrylhydrazyl: DPPH) and 3-ethlbenzthiazolne-6-sulfonic acid (ABTS) radical scavenging capability and tyrosinase inhibiting activity), the amount of total as well as eight individual phenolic compounds (chlorogenic acid, epicatechin, rutin hydrate, p-coumaric acid, kaempferol 3-O-${\beta}$-rutinoside, phloridzin dihydrate, myricetin, and quercetin), and total flavonoid content were measured in the bulbs by high performance liquid chromatography. We detected high amounts of total phenol and total flavonoid as well as high DPPH and ABTS radical scavenging ability. More tyrosinase inhibiting activity was detected in the new bulbs than in the waste bulbs. However, both the new and waste bulbs showed a higher inhibitory activity than the standard (100 ppm ascorbic acid). Although the content of phenolic compounds differed among varieties, under the conditions of the experiment, the most abundant phenolics were epicatechins, followed by chlorogenic acid, and rutins. Overall, the waste bulbs had a higher content of these compounds than the new bulbs. Based on these results, we concluded that bulbs from cut lilies could be used as functional foods in the future and farmers could expect economic gain from the hitherto neglected waste bulbs.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.1
• /
• pp.37-43
• /
• 2015

Korea has four distinct seasons, showing hot and humidity in summer and cold weather lasted in winter. Domestic research on earth work has been developed according to the seasonal characteristics, and most of research topics have focused on the effect of freezing-thawing on the performance of geo-materials. However, the previous research was performed on the ground compacted at room temperature and therefore, the effect of the sub-zero temperature at the time of construction was not fully investigated. The ground characteristics compacted at freezing temperature can be different from those at room temperature and show different characteristics of strength and deformation caused by freezing and thawing. Therefore, the compaction tests on sandy materials were conducted under various temperature at $-3^{\circ}C$ and $-8^{\circ}C$ with various fine contents of 0%, 5%, 10% and 15% in weight fraction. The effectiveness of soil compaction at below-freezing temperatures were compared with the compaction at room temperature at $18^{\circ}C$ in terms of the maximum dry unit weight and optimum water contents. Based on the test results, the maximum dry unit weight tends to decrease with the freezing temperature and the relative compaction at $-8^{\circ}C$ can not be satisfied with general specification standard.

• Journal of Environmental Health Sciences
• /
• v.46 no.3
• /
• pp.344-352
• /
• 2020

Objectives: Much attention has been paid to indoor air quality. Ventilation within schools is important because of indoor air quality and its effect on health and learning performance. In this study, we evaluated the carbon dioxide (CO₂) concentrations and ventilation rates in schools. Methods: This study measured the concentration of CO₂ in elementary, middle, and high school classrooms over six months. The seasons during the study were summer, fall, and winter. Sensor-based monitoring was used and the basic characteristics of the classroom were investigated. The body surface area of the students was used to calculate the CO₂ generation rate, and the air change per hour (ACH) was evaluated using mass balance modeling. Results: The average CO₂ concentration measured in most schools exceeded 1000 ppm. The ventilation rates varied from season to season. Compared to the recommended ventilation rate of 4.9 ACH, the roughly 3 ACH calculated in this study indicates that most schools possessed insufficient ventilation. Conclusions: The concentration of CO₂ in school classrooms could be an indicator of indoor air quality and can affect students' learning ability. In this study, CO₂ concentrations exceeding the standard indicate a lack of ventilation along with problems with indoor air quality. Therefore, appropriate improvements are needed to overcome these problems.

• The Korean Journal of Applied Statistics
• /
• v.29 no.7
• /
• pp.1459-1473
• /
• 2016

Both longitudinal data and survival data are collected simultaneously in longitudinal data which are observed throughout the passage of time. In this case, the effect of the independent variable becomes biased (provided that sole use of longitudinal data analysis does not consider the relation between both data used) if the missing that occurred in the longitudinal data is non-ignorable because it is caused by a correlation with the survival data. A joint model of longitudinal data and survival data was studied as a solution for such problem in order to obtain an unbiased result by considering the survival model for the cause of missing. In this paper, a joint model of the longitudinal zero-inflated count data and survival data is studied by replacing the longitudinal part with zero-inflated count data. A hurdle model and proportional hazards model were used for each longitudinal zero inflated count data and survival data; in addition, both sub-models were linked based on the assumption that the random effect of sub-models follow the multivariate normal distribution. We used the EM algorithm for the maximum likelihood estimator of parameters and estimated standard errors of parameters were calculated using the profile likelihood method. In simulation, we observed a better performance of the joint model in bias and coverage probability compared to the separate model.

• Journal of Broadcast Engineering
• /
• v.23 no.4
• /
• pp.559-573
• /
• 2018

Recently, one of the most actively applied image media in the most fields such as virtual reality (VR) is omni-directional or panorama image. This image is generated by stitching images obtained by various methods. In this process, it takes the most time to extract keypoints necessary for stitching. In this paper, we analyze the parameters involved in the extraction of SIFT keypoints with the aim of reducing the computation time for extracting the most widely used SIFT keypoints. The parameters considered in this paper are the initial standard deviation of the Gaussian kernel used for Gaussian filtering, the number of gaussian difference image sets for extracting local extrema, and the number of octaves. As the SIFT algorithm, the Lowe scheme, the originally proposed one, and the Hess scheme which is a convolution cascade scheme, are considered. First, the effect of each parameter value on the computation time is analyzed, and the effect of each parameter on the stitching performance is analyzed by performing actual stitching experiments. Finally, based on the results of the two analyses, we extract parameter value set that minimize computation time without degrading.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.297-303
• /
• 2010

The current encased-concrete deep corrugated steel plate has an arch type plate structure, which is a compressive strength-dominant structure that has a small moment due to its arch shape. Therefore, it increases the strength against compression by adding reinforcements to make concrete-filling spaces for increasing the compressive strength and forming cross sections that contain reinforced concrete. In this study, the safety factor of the new-concept encased-concrete bridge plate member was evaluated by comparing the compressive strength obtained from the compressive tests, flexural tests and the design compressive strength determined by using the Canadian Highway Bridge Design Code (CHBDC, 2003), which is a design standard for the encased-concrete bridge plate structures. The results of the safety factor evaluation using the design compressive strength and the test results showed that the safety factor was well above the appropriate value 2.0, which could be adjudged very conservative. If the safety factor based on this study results is considered and applied to the design, economical construction will be possible due to the reduced cross section and construction cost.

• The Korean Journal of Applied Statistics
• /
• v.23 no.6
• /
• pp.997-1021
• /
• 2010

This paper compares the two most widely used seasonal adjustment methods: the X-12-ARIMA and TRAMO-SEATS procedures. The basic features of these methods are discussed and compared in both their theoretical and empirical aspects. In doing so, the X-13A-S program is used to reevaluate their applicability to Korean macroeconomic data by considering possible structural breaks in the series. The finding is that both methods provide very reliable and stable estimates of seasonal factors and seasonally adjusted data. As for the empirical comparisons, TRAMO-SEATS appears to outperform X-12-ARIMA, although the results are somewhat mixed depending on the comparison criteria used and on the series under analysis. In particular, the performance of TRAMO-SEATS turns out to compare more favorably when seasonal adjustment is carried out to each sub-samples (by taking possible structural breaks into account) than when the whole sample period is used. The result suggests that as the model-based TRAMO-SEATS has a considerable theoretical appeal, some features of TRAMO-SEATS should further be incorporated into X-12-ARIMA until a standard and integrated procedure is reached by combining the theoretical coherence of TRAMO-SEATS and the empirical usefulness of X-12-ARIMA.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.298-304
• /
• 2017

The corrosion of reinforcements embedded in concrete causes some durability problems in reinforced and prestressed concrete structures. The epoxy coated reinforcements are one of the effective and reliable methods to prevent corrosion of reinforcements. However, it has been known that the epoxy coating reduces the bond capacity of reinforcement to concrete. This paper investigates the bond behaviors of epoxy coated reinforcements experimentally using direct pull-out test. Bond behaviors of epoxy coated bars for various reinforcement diameters of 10, 19 and 29mm and thicknesses of cover concrete of 1, 2, 3, and $4.5c/d_b$ (ratio of cover to bar diameter) are examined. Total 66 specimens were manufactured and tested according to the RILEM standard method. As the diameters of the epoxy coated reinforcements increase, the difference of bond strength between epoxy coated reinforcements and uncoated bars also increases. Epoxy coated bars showed more than 85% bond performance compared to those of uncoated bars. A new formular for estimating basic development length of epoxy coated reinforcement based on equilibrium equation is proposed using this experimental result.

• The KIPS Transactions:PartD
• /
• v.8D no.4
• /
• pp.313-326
• /
• 2001

The XML that was proposed as a next-generation standard for describing Web documents is widely used in various Web-based applications. In addition, XML documents on the Web link each other by hyperlinks. The current works on XML focus on the XML storage system that can efficiently store, manage, and retrieve XML documents. However, the research on the query language that supports the XML links and on the XML retrieval systems to process the XML links, is little conducted until now. In this paper, we propose an extension of an XML query language for expressing the XML link query and its processing scheme. A link query is to retrieve contents from an XML document (a query document) and from the XML documents (referenced documents) that are referred to by the links in the query document. As far as retrieving from the referenced documents is concerned, the current practice is to manually generate queries to get the partial results, and to repeat such a procedure. The purpose of link query processing in this paper is to eliminate the manual work altogether in getting the complete query result. The performance analysis shows that our link query processing strategy outperforms the conventional approach including the manual tasks. The more links to the referenced documents and the more referenced documents there are in the site storing the query document, the more query processing time decreases.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.6
• /
• pp.693-700
• /
• 2012

In this study, the Charpy impact test along with metallurgical observation was conducted to evaluate low temperature impact toughness of structural steel welds with different welding processes to find out the optimal welding process to guarantee the required impact toughness at low temperatures. The welding processes employed are shield metal arc welding (SMAW) and flux cored arc welding(FCAW), which are commonly used welding methods in construction. The Charpy impact test is a commercial quality control test for steels and other alloys used in the construction of metallic structures. The test allows the material properties for service conditions to be determined experimentally in a simple manner with a very low cost. To investigate the impact toughness at low temperatures of the steel welds, specimens were extracted from the weld metal and the heat affected zone. Standard V-notch Charpy specimens were prepared and tested under dynamic loading condition. The low temperature impact performance was evaluated based on the correlation between the absorbed energy and the microstructure. Analysis of the results showed that the optimal welding process to ensure the higher low temperature impact toughness of the HAZ and the weld metal is SMAW process using the welding consumable for steels targeted to low temperature use.