• Journal of the Korea Institute of Building Construction
• /
• v.21 no.3
• /
• pp.203-211
• /
• 2021

Recently, the insulaton design standards for reducing the energy use of buildings have been strengthened. Althoug insulation work is the most cost-effective method for reducing the primary energy consumption per unit area of a building, there are no evaluation criteria for insulation performance at the time of construction and completion inspection. The purpose of this study is to provide objective data by establishing a standard for an analysis method and a method for easily experimenting with the exterior wall thermal transmittance of an apartment house using a thermal transmittance measuring device(TESTO 435). For the exterior wall of the test subject, the specific heat per unit area exceeded 20kJ/(m²·K), and the data at the end point suitable for ISO 9869-1 were analyzed by the average method. The measured values of the thermal transmittance for 3 consecutive days converged within +5% of the desing value, and the standard deviation of the thermal transmittance by day decreased in the order of 1-Day > 3-Day > 2-Day. The standard deviation of the thermal transmittance by time period decreased in the order of 00:00~24:00 < 19:00~07:00 < 00:00~07:00. The measured value of the thermal transmittance for the time perion of 00:00 to 07:00 per day almost coincided with an error of -3% to + 2% compare to the desing value.

• Knowledge Management Research
• /
• v.24 no.3
• /
• pp.17-34
• /
• 2023

Recently, national concern for record breaking level of deficit operation of KEPCO grows bigger in Korea. With this regard, many stakeholders believe KEPCO should be responsible for this result although it is not clear whether KEPCO is only to blame who is in such position where full cost pricing is impossible and entrepreneurial efficiency is not guaranteed. Particularly, less concern is given to Performance Evaluation for Public Organization(PEPO) which did not give prior warning against major deficit of KEPCO or help to improve its capacity to deal with the problem, and thus prevented KEPCO from acknowledging its managerial weakness by crediting KEPCO with successive grade B during the period of previous government. Based on such viewpoint, this study analyzes reports of PEPO for 5 years in terms of evaluability assessment and suggests proper direction for better PEPO in the future. From this analysis, it was found that firstly, relevant suggestion was not made to prevent or improve defict problem; secondly, comments are increasing every year without consistency; thirdly, comments related to long-term investment are only recently found; fourthly, suggestions are based on political orientation rather than evidence or expertise. This study is expected to contribute to evidence-based evaluation and knowledge management since it tackles evaluation reports themselves for the first time.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.2 s.30
• /
• pp.98-108
• /
• 2006

The cost of construction engineering field is less than $3{\sim}5%$ of the gross construction cost, it, however, is very important because the performance of final facility depends on the technical ability of construction engineering company. However, as the results of the technical level of domestic construction engineering survey from experts, it was less than 70% of developed country. For this reason, domestic construction engineering companies are confronted with serious problems to go into overseas market. Accordingly, this research analyzed the construction engineering market trend of domestic and overseas in order to suggest the strategies to go into the Vietnam. Moreover, this research identified problems and strategies of making inroads into the world market through the survey from the domestic construction company related to overseas construction, advanced a theory through extensive literature review, and collected extensive opinions through an interview with domestic and foreign experts and business trip. The purpose of this research is to provide market analysis and strategic plan for advancing into overseas market in order to make the domestic construction engineering companies to go into the Vietnam market. Especially, as a plan for the revitalization of advancing overseas market of domestic construction engineering companies, this research proposed Constructing Local Infrastructure, Business Creation of Planning Proposals and Enlarged Plans of ODA(Official Development Assistant).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6C
• /
• pp.251-258
• /
• 2011

Steel pipe piles have been used as various deep foundation materials for a long time. Recent increase in steel material cost has made engineers reluctant in using it even with its good quality and ease of construction. Therefore when constructing with steel pipe pile, the decision to reuse the excessive pile length that is cut off from the designed pile head elevation after pile driving can be cost saving. This has caused many constructors to reuse the pile leftovers with new piles, but the absence of quantitative structural capacity behaviors of steel pipe pile after pile driving or appropriate countermeasures and standards in reusing steel pipe pile has resulted in wrong applications, pile structural integrity problems, inappropriate limitation of reusable pile length, etc. The structural performance analysis between a new pile and a pile that has undergone working state and ultimate state stress level during pile driving was performed in this research by means of comparing the results between the dynamic pile load test, tensile load test, charpy energy test and fatigue test for high strength steel of $440N/mm^2$ yield strength. Test results show that under working load conditions the yield strength variation is less than 2% and for ultimate load conditions the variation is less than 5% for maximum total blow count of 3000. The results have been statistically analyzed to check the sensitivity of each factors involved. From the test results, reusability of steel pipe pile lies not in the main pipe yield strength deviation but in the reduction of absorb energy, strength changes and quality control at the welded section, shape deformation and local buckling during pile driving.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.6
• /
• pp.613-622
• /
• 2020

The South Korean government plans for a 37 % reduction in CO2 emissions against business as usual by 2030. Subsequently, the Ministry of Land, Infrastructure and Transport declared a 26.9 % reduction target in greenhouse gas emissions from buildings by 2020 and established the Green Standard for Energy and Environmental Design (G-SEED) to help improve the environmental performance of buildings. Construction companies often work with consulting firms to prepare for G-SEED certification. In the process, owing to inefficient data sharing and work connections, it is difficult to achieve economic efficiency and obtain certification. The objective of this study was to develop an economic model to assist contractors in achieving the required G-SEED scores for materials and resources. To do this, we automated the process for material comparison and selection on the basis of an analysis of actual consulting data, and developed a model that selects material alternatives that can meet the required scores at a minimum cost. Information on materials is input by applying a genetic algorithm to the optimization of alternatives. When the model was applied to actual data, the construction cost could be lowered by 79.3 % compared with existing methods. The economical material selection model is expected to not only reduce construction costs for owners desiring G-SEED certification but also shorten the project design time.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.13-20
• /
• 2005

Fiber-Bragg-grating external cavity laser(FGL) modules were fabricated and experimentally analyzed. Proposed as a cost-effective solution for optical sources in the WDM-PON access network, FGL modules were packaged to TO-CAN type. We obtained a low threshold current of 13 mA, and an optical output power of 3.6 mW with a bias current of 60 mA at $25^{\circ}C$. The lasing wavelength dependencies on current and temperature were as small as 5.2 pm/mA and 30 pm/$^{\circ}C$, respectively. These change rates of the wavelength with the temperature and current are smaller than those of the DFB laser. Single-mode oscillations with the side-mode suppression ratio(SMSR) over 30 dB are maintained above the threshold current level. The FGL modules can be directly modulated at 155 Mbps, PRBS(2$^{23}$ -1) NRZ signal. Through the BER plots, we did not see the significant degradations before and after the transmission over 20km of the SMF at 155 Mb/s.

• Journal of Internet Computing and Services
• /
• v.23 no.3
• /
• pp.35-45
• /
• 2022

Even in recent years, treatment of first-aid patients is still often delayed due to a shortage of medical resources in marginalized areas. Research on automating the analysis of medical data to solve the problems of inaccessibility for medical services and shortage of medical personnel is ongoing. Computer vision-based medical inspection automation requires a lot of cost in data collection and labeling for training purposes. These problems stand out in the works of classifying lesion that are rare, or pathological features and pathogenesis that are difficult to clearly define visually. Anomaly detection is attracting as a method that can significantly reduce the cost of data collection by adopting an unsupervised learning strategy. In this paper, we propose methods for detecting abnormal images on chest X-RAY images as follows based on existing anomaly detection techniques. (1) Normalize the brightness range of medical images resampled as optimal resolution. (2) Some feature vectors with high representative power are selected in set of patch features extracted as intermediate-level from lesion-free images. (3) Measure the difference from the feature vectors of lesion-free data selected based on the nearest neighbor search algorithm. The proposed system can simultaneously perform anomaly classification and localization for each image. In this paper, the anomaly detection performance of the proposed system for chest X-RAY images of PA projection is measured and presented by detailed conditions. We demonstrate effect of anomaly detection for medical images by showing 0.705 classification AUROC for random subset extracted from the PadChest dataset. The proposed system can be usefully used to improve the clinical diagnosis workflow of medical institutions, and can effectively support early diagnosis in medically poor area.

• The Journal of Bigdata
• /
• v.4 no.2
• /
• pp.159-173
• /
• 2019

Last-Mile delivery optimization plays a key role in the urban supply chain operation, which is the most expensive and time-consuming and most complicated part of the whole delivery process. The urban consolidation center (UCC) is regarded as a significant asset for supporting customer demand in the last-mile delivery service. It is the key benefit of UCC to improve the load balance of vehicles and to reduce the total traveling distance by finding the better route with the well-organized multi-leg vehicle journey in the urban area. This paper presents the model using multiple scenario analysis integrated with mathematical optimization techniques using Geographic Information System (GIS). The model aims to find the best solution for the distribution network consisted of DC and UCC, which is applied to the case of Ulaanbaatar Mongolia. The proposed methodology integrates two sub-models, location-allocation model and vehicle routing problem. The multiple scenarios devised by selecting locations of UCC are compared considering the general performance and delivery patterns together. It has been adopted to make better decisions the quantitative metrics such as the economic value of capital cost, operating cost, and balance of using available resources. The result of this research may help the manager or public authorities who should design the distribution network for the last mile delivery service optimization using UCC within the urban area.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.1
• /
• pp.35-43
• /
• 2010

1D PCA utilized in the face appearance-based face recognition methods such as eigenface-based face recognition method may lead to less face representative power and more computational cost due to the resulting 1D face appearance data vector of high dimensionality. To resolve such problems of 1D PCA, 2D PCA-based face recognition methods had been developed. However, the face representation model obtained by direct application of 2D PCA to a face image set includes both face common features and face distinctive identity features. Face common features not only prevent face recognizability but also cause more computational cost. In this paper, we first develope a model of a face distinctive identity feature subspace separated from the effects of face common features in the face feature space obtained by application of 2D PCA analysis. Then, a novel robust face recognition based on the face distinctive identity feature subspace model is proposed. The proposed face recognition method based on the face distinctive identity feature subspace shows better performance than the conventional PCA-based methods (1D PCA-based one and 2D PCA-based one) with respect to recognition rate and processing time since it depends only on the face distinctive identity features. This is verified through various experiments using Yale A and IMM face database consisting of face images with various face poses under various illumination conditions.

• Spatial Information Research
• /
• v.12 no.2
• /
• pp.181-191
• /
• 2004

Nowadays, GPS-photogrammetry can be applied to the basemap production, a land register and NGIS. And from now on, as the increase of GPS receiver rate, the study on the interpolation methods considering the exact movement of an aircraft at photoflight and the study on the supplement of GPS defect by INS are required continuously. GPS-Photogrammetry, which are based on the direct measurement of the projection centers and attitude at the moment of camera exposure time through loading the GPS receiver in aircraft. This photogrammetric methods can of for us to acquire the exterior orientation parameters with only minimum ground control points, even the ground control process could be completely skipped. Consequently, we can drastically reduce the time and cost far the mapping process. In this thesis, two test flights were conducted in area to evaluate the performance of accuracy and efficiency through the analysis of results between the two photogrammetric methods, that is, traditional photograrammetry, GPS-Photogrammetry. Test results shows that a large variety of advantages of GPS-Photogrammetry against traditional photogrammetry is to be verified. Especially, the number of ground control points for the exterior orientation could be saved more than 70～80%, and the cost far map production 30～50%, respectively. In addition, it was convinced that the large reduction of control points has not any effect on the block accuracy.