• Journal of the Korean Dietetic Association
• /
• v.24 no.1
• /
• pp.1-18
• /
• 2018

Sustainable practices of school foodservices are gaining more attentions. The study aimed to investigate dietitians' performance levels of sustainable practices in school foodservice settings in Gyeonggi Provinces. Using a survey method was used, and data were collected from 358 participants (response rate 59.7%) to be analyzed using the SPSS program. The evaluation tool for sustainable practices of school foodservices consisted of four sections and 34 criteria with 100 points. Employment status of the respondents was as follows: nutrition teachers 40.9%, dietitians (permanent) 45.1%, and temporary position dietitians 13.2%. Dietitians' performance for sustainable practices marked 65.67 points out of 100 (performance rate 66%) and were in the following order by section: sustainable foodservice management criteria (69%), support activities (69%), planning and evaluation (68%), and outcome management (52%). Regarding sub-sections, criteria that acquired higher performance rates were labelling of food origin (99%), use of seasonal vegetables and fruits (98%), food waste management by contract dealer (98%), and planning for reducing of food waste and solid waste (91%). Meanwhile, criteria that showed the lowest scores were installing water conservation devices on equipment (19%), operating food donation programs for communities (21%), use of sensor lights for electricity conservation (24%), planning for annual energy conservation (40%), and implementation of education programs for foodservice workers on sustainable activities (42%). Performance scores differed according to school levels and working experience of dietitians, indicating that dietitians at elementary school foodservices or with work experience of 15 to 20 years showed higher performance than those at high schools or with less than 5 years of work experience (P<0.001, P<0.05). Based on the results, action plans for improvement were suggested.

• Wind and Structures
• /
• v.2 no.4
• /
• pp.325-345
• /
• 1999

In recent years, rainscreen walls based on the pressure equalization principle are often used in building construction. To improve the understanding of the influence of several design parameters on the pressure equalization performance of such wall systems, a theoretical consideration of the problem may be more appropriate. On this basis, this paper presents two theoretical models, one based on mass balance and the other based on the Helmholtz resonator theory, for the prediction of cavity pressure in rigid rainscreen walls. New measures to assess the degree of pressure equalization of rainscreen walls are also suggested. The results show that the model based on mass balance is sufficiently accurate and efficient in predicting the cavity pressure variations. Further, the performance of the proposed model is evaluated utilizing the data obtained from full-scale tests and the results are discussed in detail.

• Journal of Families and Better Life
• /
• v.7 no.2
• /
• pp.1-13
• /
• 1989

The purpose of this stud is : (1) to figure out the amount of time being usually spent on the housework performed by the employed wives and (2) to find out factors influencing the total and the specified housework time. The major findings are the following : 1) A employed wife spends 374 minutes(6.2 hours) on the average a day on the housework. Compared with research results of the past, this shows little difference, and less 157 minutes than full time homeworker. Time connected with meals is 123minutes, clothing (68), management and marketing(64), family care(61), and housing care(58). 2) Family environment variables (the wife's education level, wife's employment status, income, young child's age and presence of employed housekeeper) significantly differentiates the housework time. In general, a wife with higher SES level spends less time for housework except family care. 3) Housework related variables (planning, preference, performance competency, and performance stand rd) significantly differentiate the specified houseworks. High planning, preference, and performance competency do not necessarily diminish the housework time except routine houseworks. High performance standard causes her to spend more time. 4) A wife' sex-role attitudes and a husbands attitudes perceived are more traditional, she spends more time.

• Journal of Information Technology Applications and Management
• /
• v.11 no.3
• /
• pp.35-62
• /
• 2004

Recently, IT outsouricng has been one of the major concerns of many companies. This paper explores the relationship between information technology outsourcing risk factors and outsourcing performance. It is based upon a three-phase process utilizing IPO (Input-Process-Output) system. The first phase means the outsourcing planning risks t~at arise from overall environment of outsourcing, organizational refuse, and wrong contracts. The second phase implies outsourcing operational risks, which are occurred while out-sourcing perform and consist of organizational acceptances of outsourcing, partnership and hidden costs. The last phase is outsourcing performance based on four perspective of BSC(Blanced Scored Card). The survey was performed on the IT/IS firms, and the data was collected from 53 service receivers. The result of the analysis are as follows. First, Outsourcing planning risks positively affects the operational risks. Second, Outsourcing operational risks negatively affects the Outsourcing Performance.

• The Journal of Information Systems
• /
• v.16 no.3
• /
• pp.69-90
• /
• 2007

Recently, Service Level Management(SLM) including SLA has been developing to manage the level of information systems service. Although previous SLA studies have provided the conceptual model and critical success factors, the studies have not tested the effectiveness of the SLA by way of the empirical study. In this study, we applied an innovation decision making theory to our model and tested an empirical study using of a firm survey data. We suggested a SLM model, which consists of SLA planning, application, management dimensions. We found that the SLM's management stage has an impact on performance, whereas SLM's planning and application has not. At each sub dimensional analysis, there are found that adequate SLA indicators in the application stage influences performance and change management and feedback & reporting in the management stage influence performance.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.10-11
• /
• 2021

Demands for digital transformation of the construction industry are increasing to improve the accuracy of the construction operation planning and the performance of the construction operation. Even though large number of studies are being conducted to this date, most of the studies are not likely to be available on the real sites. Therefore, this study provides construction managers with a methodology of drawing construction performance indicators based on productivity analysis using Artificial Neural Network (ANN) models and Web-CYCLONE. This methodology is expected to have high utilization and precision of construction operation planning and management.

• Korean Journal of Health Education and Promotion
• /
• v.23 no.3
• /
• pp.149-167
• /
• 2006

Objectives: This study examined the national health promotion plan 2010 in order to identify the agenda and issues to be considered for the improvement of the evaluation of the plan and future planning. In specific, the examination focused on both the planning model and practical aspects of the planning work. With regard to the planning model, attention was directed to the theoretical background, logical framework and assumptions involved in the design. Also, an observation was made in comparison with Japanese $\ulcorner$Health Japan 21$\lrcorner$ and American $\ulcorner$Healthy People 2010$\lrcorner$ which provided main reference to our original health plan 2010 and revised health plan 2010 respectively. From this observation it was found that all the plans of three countries, except our original health plan 2010, basically employed a model of educational and ecological approaches to health promotion planning. As predicted, the practical constraints on the health promotion policy and programs in Korea led to many difficulties in attaining the rationality and validity of the plan. The short period of time afforded for the planning work, the limited availability of relevant data and research findings, and the lack of experiences and competent personnel in health promotion planning were main factors impeding the planning work performance. The observation and analysis of the National Health Promotion Plan 2010 suggest two main implications for the future planning of health promotion. First, it will be both theoretically and practically appropriate to maintain the current planning model basically as it is. Second, there are many practical problems that may impede effective planning for health promotion, thus continuous efforts should be made to remove or alleviate such problems.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.2
• /
• pp.217-226
• /
• 2006

Grasping and manipulation by hands can be considered as one of inevitable functions to achieve the performances desired in humanoid operations. When a humanoid robot manipulates an object by his hands, each finger should be well-controlled to accomplish a precise manipulation of the object grasped. So, the trajectory of each joint required for a precise finger motion is fundamentally necessary to be planned stably. In this sense, this paper proposes an effective joint motion planning method for humanoid fingers. The proposed method newly employs a bio-mimetic concept for joint motion planning. A suitable model that describes an interphalangeal coordination in a human finger is suggested and incorporated into the proposed joint motion planning method. The feature of the proposed method is illustrated by simulation results. As a result, the proposed method is useful for a facilitative finger motion. It can be applied to improve the control performance of humanoid fingers or prosthetic fingers.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.2
• /
• pp.130-145
• /
• 2004

This paper addresses the integrated problem of process planning and scheduling in FMS (Flexible Manufacturing System). The integration of process planning and scheduling is important for an efficient utilization of manufacturing resources. In this paper, a new method using an artificial intelligent search technique, called asymmetric multileveled symbiotic evolutionary algorithm, is presented to handle the two functions at the same time. Efficient genetic representations and operator schemes are considered. While designing the schemes, we take into account the features specific to each of process planning and scheduling problems. The performance of the proposed algorithm is compared with those of a traditional hierarchical approach and existing evolutionary algorithms. The experimental results show that the proposed algorithm outperforms the compared algorithms.

• Korean Management Science Review
• /
• v.19 no.2
• /
• pp.75-89
• /
• 2002

According to the fast-paced environment of information technology and improving customer services, the design activities of logistics systems improve customer centric services and delivery performance implementing e-logistics system. The fundamental design issues that arise in the delivery system planning are optimizing the system with minimum cost and maximum throughput and service level. This study is concerned with the integrated model development of delivery system with customer responsive service level for DCM, Demand Chain Management. We used a two-step approach for this study. First, we formulated the supply. center facility planning using stochastic set-covering problem and assigned the customers to the supply center using clustering algorithm. Second, we developed vehicle delivery planning for a supply center based on GIS, GIS-VRP. Also we developed a GUI-type computer program for proposed method for supply center problem using GIS and Geo-DataBase of Busan area. The computational results showed that the proposed method was very effective on a set of test problems.