• Structural Engineering and Mechanics
• /
• 제17권3_4호
• /
• pp.393-408
• /
• 2004

There exists a clear need to monitor the performance of civil structures over their operational lives. Current commercial monitoring systems suffer from various technological and economic limitations that prevent their widespread adoption. The wires used to route measurements from system sensors to the centralized data server represent one of the greatest limitations since they are physically vulnerable and expensive from an installation and maintenance standpoint. In lieu of cables, the introduction of low-cost wireless communications is proposed. The result is the design of a prototype wireless sensing unit that can serve as the fundamental building block of wireless modular monitoring systems (WiMMS). An additional feature of the wireless sensing unit is the incorporation of computational power in the form of state-of-art microcontrollers. The prototype unit is validated with a series of laboratory and field tests. The Alamosa Canyon Bridge is employed to serve as a full-scale benchmark structure to validate the performance of the wireless sensing unit in the field. A traditional cable-based monitoring system is installed in parallel with the wireless sensing units for performance comparison.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.37-37
• /
• 2000

This paper introduces the Performance Monitoring System(PMS) in a thermal power plant. The purpose of the PMS is to offer the operator current performance information of plant which could be an index of plant status or information to improve plant efficiency. The PMS of Bukcheju thermal power plant unit ＃2&3 is implemented under the SIEMENS DCS which supplies about 150 function blocks for performance calculation and all measured signals. The performance of unit, boiler, turbines, feedwater heaters, condenser, airpreheaters, feedwater pumps will be monitored and updated for every 5 minutes in PMS of Bukcheju TPP.

• 전기전자학회논문지
• /
• 제21권2호
• /
• pp.158-161
• /
• 2017

본 논문에서는 원자력 및 핵의학 분야용 Total RMS(Radiation Monitoring System)를 제안한다. 제안하는 시스템은 Stack Monitor, Area Monitor, Water(Liquid) Monitor 등을 하나의 시스템으로 확장 및 제어할 수 있는 장비로 각 방사선 검출기에서 측정된 신호를 통합 모니터링 할 수 있다. 제안하는 시스템은 해당 방사선을 검출하는 Sensor Module, 방사선 검출 위치에 인접한 곳에서 방사선량을 디스플레이 하는 Display Unit, 검출된 방사선량이 위험 수준에 도달시 경보를 알리는 Alarm Unit, 각 모니터링에서 측정된 방사선량들을 취합하고 저장하여 원격 감시 시스템에 내용을 전달하는 Main Hub, 원격지에서 측정된 방사선량 상태를 일목요연하게 디스플레이 하는 RMS Monitoring Unit 등으로 구성된다. 제안된 원자력 및 핵의학 분야용 Total RMS의 성능을 평가하기 위하여 공인시험기관에서 실험한 결과, 측정 불확도가 8.5%이하로 측정되어 국제 표준인 ${\pm}15%$ 이하에서 정상동작 됨이 확인되었다.

• 전기학회논문지P
• /
• 제56권1호
• /
• pp.13-18
• /
• 2007

In this paper, authors deal with an application of power quality monitoring using the Sampled Value which is described in the IEC61850 International Standard for substation communication. Firstly, while Merging Unit is designed as a process level device transmitting sensor data, the practical problems such as time delay compensation and optical fiber communication are issued. Secondly, the Sampled Value message which is proper to a power quality monitoring system is presented. Because the power quality monitoring system requests non time critical service comparing to protection and control applications, the Sampled Value service message structure is introduced to improve efficiency. At last, the power quality monitoring server having various power quality analysis functions is suggested to verify the performance of Merging Unit. With the diverse experiments, it is proved that the process bus distributed solution is flexible and economic for the power quality monitoring.

• 전기학회논문지P
• /
• 제57권1호
• /
• pp.30-35
• /
• 2008

In this paper, the application of power Quality monitoring based on Sampled Value(SV) which is introduced in the IEC61850 International Standard for substation communication are discussed. Firstly, while Merging Unit(MU) is designed as a process level device transmitting sensor data, the practical problems such as time delay compensation and optical fiber communication are encountered. Secondly, the Sampled Value message which is proper to a power quality monitoring system is presented. Because the power quality monitoring system requests less time-critical service compared to protection and control applications, the Sampled Value service message structure is introduced to improve efficiency. Lastly, the power quality monitoring server having various power quality analysis functions is suggested to verify the performance of Merging Unit With the diverse experiments, it is proved that the process bus distributed solution is flexible and economic for the power quality monitoring.

• 센서학회지
• /
• 제15권1호
• /
• pp.40-46
• /
• 2006

This paper presents a novel fiber optic accelerometer system for monitoring vibration of large-size structures. The system is composed of one (or multiple) sensor head, a light control unit and a signal processing unit. The sensing mechanism of the sensor head is based on a novel integration of the moire fringe phenomenon with fiber optics to achieve a robust performance in addition to its immunity to EM interference, easy cabling, and low cost. In this paper, a prototype of the fiber optic accelerometer system has been developed successfully. A low-cost light control unit has been developed to drive the system's optic and electronic components. A unique algorithm has also been developed to derive the sensor's acceleration from the raw signals of the light control unit; it is implemented via a separate signal processing unit. Finally, the shaking table tests successfully demonstrate the performance and the potential of the moire fringe fiber optic sensor system to monitor the health of civil infrastructures.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.449-450
• /
• 2015

이 논문에서는 XG-PON (10-Gbps-capable passive optical network) 시스템에서 전송요청을 사용하지 않는 동적대역할당 알고리즘의 성능을 평가한다. OLT (optical line termination)는 ONU(optical network unit)의 상향 대역폭 사용량을 monitoring 해서 ONU의 전송허가량을 추측한다.

• 동력기계공학회지
• /
• 제13권1호
• /
• pp.53-58
• /
• 2009

The emergency diesel generator(EDG) of the nuclear power plant is designed to supply the power to the nuclear reactor on Station Black Out(SBO) condition. The operation reliability of onsite emergency diesel generator should be ensured by a conditioning monitoring system designed to monitor and analysis the condition of diesel generator. For this purpose, we have developing the technologies of condition monitoring for the wolsong unit 3&4 standby diesel generator including diesel engine performance. In this paper, technologies of condition monitoring for the wolsong standby diesel generator are described about three step. First is for selection of operating parameter for monitoring. Second is for technologies of online condition monitoring, Third is for monitoring of engine performance.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권2호
• /
• pp.134-144
• /
• 2007

본 연구에서는 구조물의 모니터링 시스템을 위하여 최근에 급속하게 발전하는 스마트 센서 기술을 이용하여 스마트 센서 장치를 개발하였고 다양한 실험을 통하여 개발한 스마트 센서의 기본적 성능 평가와 모형 구조물을 이용한 손상 검출 실험을 실시하였다. 본 논문은 Part 1로써 스마트 센서의 개발과 성능 평가에 관한 것이고 Part 2에서는 스마트 센서를 이용한 손상 검출 결과를 유선 계측 시스템을 이용한 실험결과와 비교하였다. 스마트 센서는 고 출력의 무선 모뎀과 고 성능 MEMS 센서, AVR 마이크로컨트롤러를 이용하여 개발하였으며 센서의 제어와 운영을 위한 임베디드 프로그램을 개발하였다. 스마트 센서의 성능을 검증하기 위하여 민감도와 분해능 분석 실험과 캔틸레버 보와 가진기를 이용한 데이터 획득 실험, 실 구조물을 이용한 현장 적용 실험을 실시하였다. 실험 결과, 개발한 스마트 센서의 성능에 대한 만족스런 결과를 얻었다.

• 전자공학회논문지B
• /
• 제32B권8호
• /
• pp.1064-1073
• /
• 1995

On a bus-based shared memory multiprocessing system, the system bus monitoring and analysis are crucial for system integration test and performance analysis. In this paper, the design and implementation of a bus monitoring instrument for the TICOM-III system are decribed. The instrument dedicated to TICOM-III, which is called the Bus Information Procssing Unit, analyzes the bus state and measures the bus utilization. It performs many useful functions to help debugging the system, and offers a simple user interface.