• 지능정보연구
• /
• 제26권2호
• /
• pp.27-42
• /
• 2020

인터넷이라는 가상 공간을 활용함으로써 물리적 공간의 제약을 갖는 오프라인 쇼핑의 한계를 넘어선 온라인 쇼핑은 다양한 기호를 가진 소비자를 만족시킬 수 있는 수많은 상품을 진열할 수 있게 되었다. 그러나, 이는 역설적으로 소비자가 구매의사결정 과정에서 너무 많은 대안을 비교 평가해야 하는 어려움을 겪게 함으로써 오히려 상품 선택을 방해하는 원인이 되기도 한다. 이런 부작용을 해소하기 위한 노력으로서, 연관 상품 추천은 수많은 상품을 다루는 온라인 상거래에서 소비자의 구매의사결정 과정 중 정보탐색 및 대안평가에 소요되는 시간과 노력을 줄여주고 이탈을 방지하며 판매자의 매출 증대에 기여할 수 있다. 연관 상품 추천에 사용되는 연관 규칙 마이닝 기법은 통계적 방법을 통해 주문과 같은 거래 데이터로부터 서로 연관성 높은 상품을 효과적으로 발견할 수 있다. 하지만, 이 기법은 거래 건수를 기반으로 하므로, 잠재적으로 판매 가능성이 높을지라도 충분한 거래 건수가 확보되지 못한 상품은 추천 목록에서 누락될 수 있다. 이렇게 추천 시 제외된 상품은 소비자에게 구매될 수 있는 충분한 기회를 확보하지 못할 수 있으며, 또 다시 다른 상품에 비해 상대적으로 낮은 추천 기회를 얻는 악순환을 겪을 수도 있다. 본 연구는 구매의사결정이 결국 상품이 지닌 속성에 대한 사용자의 평가를 기반으로 한다는 점에 착안하여, 추천 시 상품의 속성을 반영하면 소비자가 특정 상품을 선택할 확률을 좀더 정확하게 예측할 수 있다는 점을 추천 시스템에 반영하기 위한 목적으로 수행되었다. 즉, 어떤 상품 페이지를 방문한 소비자는 그 상품이 지닌 속성들에 어느 정도 관심을 보인 것이며 추천 시스템은 이런 속성들을 기반으로 연관성을 지닌 상품을 더 정교하게 찾을 수 있다는 것이다. 상품의 주요 속성의 하나로서, 카테고리는 두 상품 간에 아직 드러나지 않은 잠재적인 연관성을 찾기에 적합한 대상이 될 수 있다고 판단하였다. 본 연구는 연관 상품 추천에 상품 간의 연관성뿐만 아니라 카테고리 간의 연관성을 추가로 반영함으로써 추천의 정확도를 높일 수 있는 예측모형을 개발하였고, 온라인 쇼핑몰로부터 수집된 주문 데이터를 활용하여 이루어진 실험은 기존 모형에 비해 추천 성능이 개선됨을 보였다. 실무적인 관점에서 볼 때, 본 연구는 소비자의 구매 만족도를 향상시키고 판매자의 매출을 증가시키는 데에 기여할 수 있을 것으로 기대된다.

• 헤리티지:역사와 과학
• /
• 제39권
• /
• pp.351-378
• /
• 2006

매체의 발달과 함께 무형문화재에 대한 기록도 여러 가지 방법으로 시도되고 있는데, 과거에는 문자 기록에만 의존하던 것에서 최근에는 사진, 음원 및 영상 등을 많이 활용하게 되었고, 그 방식에 있어서도 아날로그 방식에서 디지털 방식으로 이행하고 있는 추세이다. 이러한 변화의 과정에서 모션캡쳐를 이용한 무형문화재의 기록은 3차원적 기록을 필요로 하는 무용종목 등에서 주목을 받고 있다. 모션캡쳐란 움직이는 물체에 공간상의 위치를 표시하는 센서를 부탁시키고 시간의 흐름에 따라 센서의 위치를 컴퓨터의 좌표공간에 치환하여 기록하는 시스템으로, 모션캡쳐를 이용한 무형문화재의 기록은 형체가 없이 사람의 기예에 의해서 전승되고 있는 무형문화재의 신체적 표현을 디지털화 된 데이터로 나타내줌으써 무형문화재의 보존을 위한 과학적 자료를 제공해 준다. 국립문화재연구소는 멀티미디어 및 디지털 시대에 대응하기 위해 무형문화재에 대한 새로운 기록방안 개발을 목적으로 영화 및 게임 등의 CG제작 현장에서 널리 사용되고 있는 모션캡쳐(Motion Capture) 장비를 이용하여 국가지정의 중요무형문화재에 대한 기록 작업을 실시하고 있다. 본 사업은 복권기금을 사용하여 2005년부터 2007년까지 3개년에 걸쳐서 국가지정의 중요무형문화재 중 신체적 동작이 중요하게 표현되고 있는 무용 7개 종목 11건의 모션캡쳐 작업을 실시할 예정이다. 이미 1차 년도인 2005년에는 승무, 살풀이춤, 태평무 등 기술적 난이도가 낮은 독무(獨舞)를 중심으로 데이터 축적작업을 실시하였고, 2차 년도인 2006년에는 진주검무, 승전무, 처용무 등 군무(群舞)의 데이터를 축적할 예정이며, 3차 년도인 2007년에는 학연화대합설무의 데이터 축적과 함께 축적된 데이터를 이용한 무형문화재의 비교 분석 및 전승을 위한 교육용 프로그램과 대국민 서비스를 위한 3차원 콘텐츠 등을 개발할 계획이다. 본 보고서에서는 사업 초년도인 2005년도에 실시된 보유자 이매방, 이애주, 정재만의 승무, 이매방의 살풀이춤, 강선영의 태평무 등의 모션캡쳐 작업에 대하여 기술하고 있다. 이를 통하여 무형문화재에 대한 새로운 기록 방안을 모색하기 위한 시도를 소개하려고 한다. 이번 사업에서는 기술적으로 다음과 같은 두 가지 문제가 제기되었다. 첫 번째, 장시간(20~30분 가량)의 보유자의 춤을 끊김 없이 모션캡쳐 받을 수 있는가라는 문제였다. 수 차례의 사전 모의테스트를 통해 사업수행 적합성 판단을 마쳤고, 결국 사업수행을 무사히 마칠 수 있었다. 두 번째, 리타겟팅(RE-Targeting)이 없이 정확한 모션캡쳐 동작을 가공해 낼 수 있는가라는 문제였다. 모션캡쳐 데이터에서 국내 최초로 보유자의 골격구조 역추출 방식을 도입하여 최대한 정확한 보유자의 춤 동작을 구현해낼 수 있었다. 이번 작업에서는 이매방, 이애주, 정재만, 강선영 네 보유자의 전신 삼차원 스캔을 통해 정확한 삼차원 신체 모델링을 얻었고, 보유자 본인의 춤사위 동작을 그대로 모션캡쳐에 적용함으로써 최대한 정확도를 유도할 수 있었다.

• 지능정보연구
• /
• 제25권1호
• /
• pp.163-177
• /
• 2019

스마트폰이 널리 보급되고 현대인들의 생활 속에 깊이 자리 잡으면서, 스마트폰에서 수집된 다종 데이터를 바탕으로 사용자 개인의 행동을 인식하고자 하는 연구가 활발히 진행되고 있다. 그러나 타인과의 상호작용 행동 인식에 대한 연구는 아직까지 상대적으로 미진하였다. 기존 상호작용 행동 인식 연구에서는 오디오, 블루투스, 와이파이 등의 데이터를 사용하였으나, 이들은 사용자 사생활 침해 가능성이 높으며 단시간 내에 충분한 양의 데이터를 수집하기 어렵다는 한계가 있다. 반면 가속도, 자기장, 자이로스코프 등의 물리 센서의 경우 사생활 침해 가능성이 낮으며 단시간 내에 충분한 양의 데이터를 수집할 수 있다. 본 연구에서는 이러한 점에 주목하여, 스마트폰 상의 다종 물리 센서 데이터만을 활용, 딥러닝 모델에 기반을 둔 사용자의 동행 상태 인식 방법론을 제안한다. 사용자의 동행 여부 및 대화 여부를 분류하는 동행 상태 분류 모델은 컨볼루션 신경망과 장단기 기억 순환 신경망이 혼합된 구조를 지닌다. 먼저 스마트폰의 다종 물리 센서에서 수집한 데이터에 존재하는 타임 스태프의 차이를 상쇄하고, 정규화를 수행하여 시간에 따른 시퀀스 데이터 형태로 변환함으로써 동행 상태분류 모델의 입력 데이터를 생성한다. 이는 컨볼루션 신경망에 입력되며, 데이터의 시간적 국부 의존성이 반영된 요인 지도를 출력한다. 장단기 기억 순환 신경망은 요인 지도를 입력받아 시간에 따른 순차적 연관 관계를 학습하며, 동행 상태 분류를 위한 요인을 추출하고 소프트맥스 분류기에서 이에 기반한 최종적인 분류를 수행한다. 자체 제작한 스마트폰 애플리케이션을 배포하여 실험 데이터를 수집하였으며, 이를 활용하여 제안한 방법론을 평가하였다. 최적의 파라미터를 설정하여 동행 상태 분류 모델을 학습하고 평가한 결과, 동행 여부와 대화 여부를 각각 98.74%, 98.83%의 높은 정확도로 분류하였다.

• 지능정보연구
• /
• 제28권1호
• /
• pp.155-174
• /
• 2022

2020년 1월부터 2021년 10월 현재까지 COVID-19(치명적인 호흡기 증후군인 코로나바이러스-2)와 관련된 학술 연구가 500,000편 이상 발표되었다. COVID-19와 관련된 논문의 수가 급격하게 증가함에 따라 의료 전문가와 정책 담당자들이 중요한 연구를 신속하게 찾는 것에 시간적·기술적 제약이 따르고 있다. 따라서 본 연구에서는 LDA와 Word2vec 알고리즘을 사용하여 방대한 문헌의 텍스트 자료로부터 유용한 정보를 추출하는 방안을 제시한다. COVID-19와 관련된 논문에서 검색하고자 하는 키워드와 관련된 논문을 추출하고, 이를 대상으로 세부 주제를 파악하였다. 자료는 Kaggle에 있는 CORD-19 데이터 세트를 활용하였는데, COVID-19 전염병에 대응하기 위해 주요 연구 그룹과 백악관이 준비한 무료 학술 자료로서 매주 자료가 업데이트되고 있다. 연구 방법은 크게 두 가지로 나뉜다. 먼저, 47,110편의 학술 논문의 초록을 대상으로 LDA 토픽 모델링과 Word2vec 연관어 분석을 수행한 후, 도출된 토픽 중 'vaccine'과 관련된 논문 4,555편, 'treatment'와 관련된 논문 5,791편을 추출한다. 두 번째로 추출된 논문을 대상으로 LDA, PCA 차원 축소 후 t-SNE 기법을 사용하여 비슷한 주제를 가진 논문을 군집화하고 산점도로 시각화하였다. 전체 논문을 대상으로 찾을 수 없었던 숨겨진 주제를 키워드에 따라 문헌을 분류하여 토픽 모델링을 수행한 결과 세부 주제를 찾을 수 있었다. 본 연구의 목표는 대량의 문헌에서 키워드를 입력하여 특정 정보에 대한 문헌을 분류할 수 있는 방안을 제시하는 것이다. 본 연구의 목표는 의료 전문가와 정책 담당자들의 소중한 시간과 노력을 줄이고, 신속하게 정보를 얻을 수 있는 방법을 제안하는 것이다. 학술 논문의 초록에서 COVID-19와 관련된 토픽을 발견하고, COVID-19에 대한 새로운 연구 방향을 탐구하도록 도움을 주는 기초자료로 활용될 것으로 기대한다.

• 한국산림과학회지
• /
• 제52권1호
• /
• pp.1-30
• /
• 1981

임업적(林業的)로 또는 조경적(造景的)으로 이용가치(利用価置)가 높은 24속(屬) 34종(種)의 목본식물(木本植物)을 대상(対象)으로 하여 배축(胚軸) 또는 유경삽수(幼茎揷穗) 발근현상(発根現象)을 해부학적(解剖学的)으로 관찰(觀察)하였다. 사용(使用)된 재료(材料)의 제반특성(諸般特性)과 각종(各種) 실험조건(実驗條件)들의 자세(仔細)한 내용(內容)은 Table 1과 같으며 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 배축(胚軸) 및 유경삽수(幼茎揷穗)의 횡단면상(橫断面上)에서 본 외형(外形)은 원형(圓型), 타원형(楕圓形) 및 부정형(不定形) 등(等)으로 삼대별(三大別) 할 수 있으며, 또한 부정형(不定形)은 원형(圓型)에 가까운 것, 타원형(楕圓形)에 가까운 것, 4각형(角形)에 가까운 것 그리고 삼각형(三角形)에 가까운 것 등(等)으로 구분(区分)할 수 있었다. 그리고 이들의 외형(外形)은 속간(属間)에는 현저(顕著)한 차이(差異)를 보이고 있으나, 동속내(同属內)의 종간(種間)에는 대체적(大体的)으로 유사(類似)한 경향이었으며, 속(属)에 따라 다르게 나타났다. 이것은 FAA액(液)에 고정(固定)시킨 조직(組織)에서 관찰(觀察)되는 사실(事実)에 입각(立却)한다. 2. 배축(胚軸) 및 유경삽수(幼茎揷穗)의 기부(基部) 횡단면(橫断面)에서 본 유관속(維管束)은 대부분(大部分) 병립유관속(並立維管束)으로서, 배열(排列)은 6 가지의 기본형(基本形)으로 종합(綜合)할 수 있었고, 속간(属間)에는 현저(顕著)한 차이(差異)를 나타내나 동속내(同属內)의 종간(種間)에는 대체(大体)로 유례(類例)한 경향(傾向)이었으며 간혹 예외(例外)도 있었다. 3. 공시수종(供試樹種)의 배축(胚軸) 및 유경삽수(幼茎揷穗)의 발근부위(発根部位)는 아래와 같이 6가지 부위(部位)로 종합(綜合)할 수 있다. 1) 유관속간유조직(維管束間柔組織) : 측백나무(Photo. 4), 천지백(5), 아기단풍나무(6), 단풍나무(7), 은단풍나무(8), 박태기나무(16), 싸리나무(24), 일본목련(28), 함박꽃나무(29), 예덕나무(30), 고추나무(46). 2) 형성층(形成層) 및 사부조직(篩部組織) : 편백(Photo. 1), 화백 2), 자귀나무(12), 회양목(13), 박태기나무(16), 사철나무(17), 벽오동(18), 배롱나무(22), 쥐똥나무(25), 버들쥐똥나무(26), 목련(27), 일본목련(28), 예덕나무(30), 뽕나무(31), 탱자나무(33), 가시나무(40), 찔레나무(44), 때죽나무(47), 쪽동백(48). 3) 제일차방사조직(第一次放射組織) : 사철나무(Photo. 17), 때죽나무(47). 4) 엽(葉) 적(跡) : 상수리나무(Photo. 37), 갈참나무(39). 5) 피층유조직(皮層柔組織) : 가중나무(Photo. 10) 6) 유합조직(癒合組織) : 밤나무(Photo. 15), 배롱나무(23), 갈참나무(39), 가시나무(41), 졸참나무(43). 4. 일반적(一般的) 경향(傾向)으로 배축삽수(胚軸揷穗)의 발근(発根)은 유관속간유조직(維管束間柔組織)으로 부터, 그리고 유경삽수(幼茎揷穗)의 발근(発根)은 엽적(葉跡)과 유합조직(癒合組織)으로 부터 근원기(根原基)가 각각(各各) 시원(始源)되었다. 그러나 특수(特殊)한 예(例)로서 가중나무 배축삽수(胚軸揷穗)에서는 피층유조직(皮層柔組織)으로부터 근원기(根原基)가 시원(始源)되었으며, 벽오동 배축삽수(胚軸揷穗)에서는 타수종(他樹種)에서의 일반적(一般的)인 양상(樣狀)과는 달리 유관속간(維管束間) 유조직(柔組織)과는 관계(関係)없이 유관속계(維管束系)의 목부외위(木部外圍)에 존재(存在)하는 사부유조직(篩部柔組織)으로 부터 근원기(根原基)가 기원(起源)됨을 볼 수 있었다. 5. 발근난이수종별(発根難易樹種別) 배축(胚軸) 및 유경삽수(幼茎揷穗)의 발근(発根)은 모두가 증류수(蒸溜水)를 채운 수관병내(水管甁內)에서 가능(可能)하였으나, 발근(発根)이 곤란(困難)한 수종(樹種)에 있어서는 대개 후막조직(厚膜組織)이나 사부섬유조직(篩部纖維組織) 등(等)이 발달(発達)하고 있어 발근(発根)이 늦어진듯 하며, 용이(容易)한 수종(樹種)에서는 그러한 조직(組織)이 없이 발근(発根)이 빨랐다. 그리고 발근난이수종간(発根難易樹種間)의 발근부위(発根部位)는 뚜렷하게 구분(区分)되지 않았고, 각수종별(各樹種別)로 다양(多樣)하였다. 6. 유관속(維管束)의 수(数)가 많은 수종(樹種)은 적은 수종(樹種)에 비(比)하여 대체(大体)로 발근(発根)이 늦었고, 배축(胚軸)의 유관속(維管束) 구조(構造)가 근계(根系)의 유관속체계(維管束体系)를 아직 탈피(脱皮)하지 않은 단계(段階)의 삽수(揷穗)에서는 완여(完余)히 정상적(正常的)인 줄기의 유관속체계(維管束体系)를 갖춘 것에 비(比)하여 발근(発根)이 빨랐다. 발근(発根)이 더 용이(容易)하였다는 사실(事実)은 이 경우 삽수하단조직(揷穗下端組織)이 근경전이부(根茎転移部)에 접근(接近)해 있었다는 가능성(可能性)을 암시(暗示) 할 수 있다. 7. 침활엽수(針濶葉樹) 공(共)히 배축(胚軸)을 삽수(揷穗)로 사용(使用)하였을 경우엔 성숙지(成熟枝)의 삽수(揷穗)와는 달리 대체(大体)로 유관속(維管束) 부근(附近)의 유조직(柔組織)이 근원기형성(根原基形成)의 주요(主要) 위치(位置)가 되며, 침활엽수간(針濶葉樹間)에 뚜렷한 구별(区別)이 어렵다. 8. 유경삽수(幼茎揷穗)에서는 엽적(葉跡)에서 인접(隣接)한 사부(篩部) 및 형성층세포(形成層細胞)들과 관련(関聯)하여 또는 유합조직(癒合組織)으로부터 근원기(根原基)가 형성(形成)되는 예(例)가 많으며, 배축삽수(胚軸揷穗)에서는 주(主)로 유관속간유조직(維管束間柔組織)이 근원기형성(根原基形成)의 주요위치(主要位置)가 되었다가 조직(組織)이 점차 발달(発達)되어감에 따라 그 위치(位置)가 유관속형성층(維管束形成層)으로 바꾸어져 간다.

• 항공우주정책ㆍ법학회지
• /
• 제24권1호
• /
• pp.59-89
• /
• 2009

본 논문은 5대 국제항공테러범죄협약, 다시 말해서 UN의 전문기구인 국제민간항공기구(ICAO)에서 제정된 1963년 도쿄협약, 1970 헤이그협약, 1971 몬트리올협약, 1988년 몬트리올 의정서 그리고 1991년 가소성폭약협약에 규정된 관할권조항의 내용과 그 문제점을 연구하였는데 국제항공테러 협약의 관할권을 연구하면서 얻은 결론을 다음과 같다. 첫째, 항공테러협약의 관할권규정에서 공통으로 발견되는 것은 어느 협약도 관할권의 우선순위를 명시하지 않고 있다는 점이다. 결국 하이재킹 된 항공기가 착륙한 국가와 항공기등록국간 관할권문제가 발생하는데 대부분의 경우 착륙국이 하이재커를 처벌하는 예가 많다. 둘째, 국제법상 전통적인 관할권이론에서 많은 이론이 제기되었던 소극적 국적주의(passive personality principle)가 국제항공테러협약의 제정 이후 각종 국제테러협약에서 점차적으로 발전되어가고 있는 경향을 볼 수 있다. 1973년의 뉴욕협약 제3조 1항, 1979년 인질협약 제5조 1항 (d) 그리고 1988년 로마협약 제6조 2항 (b)가 그 예이다. 또한 1979년 인질협약 제5조 1항 (c)와 1988년 로마협약 제6조 2항 (c)에서는 자국에게 작위 또는 부작위를 강요하기 위한 범행의 경우에도 그 대상국가가 관할권을 행사할 수 있도록하고 있다. 만일 장래에 국제항공테러협약이 개정이 될 경우에는 국제항공 테러범죄를 좀 더 효과적으로 억제하기 위하여 소극적 국적주의를 고려할 필요가 있다. 셋째, 헤이그협약이나 몬트리올협약은 범인의 국적주의를 부여하고 있지않으나 인질협약은 제5조 1항 (b)에 인질억류범의 국적국가에게 관할권을 부여하고 있다. 만일 A국가의 국민이 어떤 국가나 제3자의 작위나 부작위를 강요할 목적으로 B국가에서 인질을 억류했다면 A국가도 그자에 대한 관할권을 행사할 권리를 가진다는 것이다. 따라서 만일 국제항공테러협약이 개정이 될 때는 이 문제도 고려할 필요가 있다. 마지막으로 인질협약 제 5조 1항 (b)는 무국적자가 상주하는 국가에서 만약 그가 인질억류범죄를 행했고, 그 국가가 그렇게 하는 것이 적절하다고 고려하는 경우 그에 대하여 관할권을 행사할 권리를 부여한다. 이와 같은 목적에서 볼 때 무국적거주자를 국민과 동일하게 보고 있는데 헤이그협약이나 몬트리올협약에서는 없는 조항이다. 만일 국제항공테러협약이 개정이될 때는 이 문제도 함께 고려할 필요가 있다고 생각한다.

• Asia pacific journal of information systems
• /
• 제24권4호
• /
• pp.443-472
• /
• 2014

To survive in the global competitive environment, enterprise should be able to solve various problems and find the optimal solution effectively. The big-data is being perceived as a tool for solving enterprise problems effectively and improve competitiveness with its' various problem solving and advanced predictive capabilities. Due to its remarkable performance, the implementation of big data systems has been increased through many enterprises around the world. Currently the big-data is called the 'crude oil' of the 21st century and is expected to provide competitive superiority. The reason why the big data is in the limelight is because while the conventional IT technology has been falling behind much in its possibility level, the big data has gone beyond the technological possibility and has the advantage of being utilized to create new values such as business optimization and new business creation through analysis of big data. Since the big data has been introduced too hastily without considering the strategic value deduction and achievement obtained through the big data, however, there are difficulties in the strategic value deduction and data utilization that can be gained through big data. According to the survey result of 1,800 IT professionals from 18 countries world wide, the percentage of the corporation where the big data is being utilized well was only 28%, and many of them responded that they are having difficulties in strategic value deduction and operation through big data. The strategic value should be deducted and environment phases like corporate internal and external related regulations and systems should be considered in order to introduce big data, but these factors were not well being reflected. The cause of the failure turned out to be that the big data was introduced by way of the IT trend and surrounding environment, but it was introduced hastily in the situation where the introduction condition was not well arranged. The strategic value which can be obtained through big data should be clearly comprehended and systematic environment analysis is very important about applicability in order to introduce successful big data, but since the corporations are considering only partial achievements and technological phases that can be obtained through big data, the successful introduction is not being made. Previous study shows that most of big data researches are focused on big data concept, cases, and practical suggestions without empirical study. The purpose of this study is provide the theoretically and practically useful implementation framework and strategies of big data systems with conducting comprehensive literature review, finding influencing factors for successful big data systems implementation, and analysing empirical models. To do this, the elements which can affect the introduction intention of big data were deducted by reviewing the information system's successful factors, strategic value perception factors, considering factors for the information system introduction environment and big data related literature in order to comprehend the effect factors when the corporations introduce big data and structured questionnaire was developed. After that, the questionnaire and the statistical analysis were performed with the people in charge of the big data inside the corporations as objects. According to the statistical analysis, it was shown that the strategic value perception factor and the inside-industry environmental factors affected positively the introduction intention of big data. The theoretical, practical and political implications deducted from the study result is as follows. The frist theoretical implication is that this study has proposed theoretically effect factors which affect the introduction intention of big data by reviewing the strategic value perception and environmental factors and big data related precedent studies and proposed the variables and measurement items which were analyzed empirically and verified. This study has meaning in that it has measured the influence of each variable on the introduction intention by verifying the relationship between the independent variables and the dependent variables through structural equation model. Second, this study has defined the independent variable(strategic value perception, environment), dependent variable(introduction intention) and regulatory variable(type of business and corporate size) about big data introduction intention and has arranged theoretical base in studying big data related field empirically afterwards by developing measurement items which has obtained credibility and validity. Third, by verifying the strategic value perception factors and the significance about environmental factors proposed in the conventional precedent studies, this study will be able to give aid to the afterwards empirical study about effect factors on big data introduction. The operational implications are as follows. First, this study has arranged the empirical study base about big data field by investigating the cause and effect relationship about the influence of the strategic value perception factor and environmental factor on the introduction intention and proposing the measurement items which has obtained the justice, credibility and validity etc. Second, this study has proposed the study result that the strategic value perception factor affects positively the big data introduction intention and it has meaning in that the importance of the strategic value perception has been presented. Third, the study has proposed that the corporation which introduces big data should consider the big data introduction through precise analysis about industry's internal environment. Fourth, this study has proposed the point that the size and type of business of the corresponding corporation should be considered in introducing the big data by presenting the difference of the effect factors of big data introduction depending on the size and type of business of the corporation. The political implications are as follows. First, variety of utilization of big data is needed. The strategic value that big data has can be accessed in various ways in the product, service field, productivity field, decision making field etc and can be utilized in all the business fields based on that, but the parts that main domestic corporations are considering are limited to some parts of the products and service fields. Accordingly, in introducing big data, reviewing the phase about utilization in detail and design the big data system in a form which can maximize the utilization rate will be necessary. Second, the study is proposing the burden of the cost of the system introduction, difficulty in utilization in the system and lack of credibility in the supply corporations etc in the big data introduction phase by corporations. Since the world IT corporations are predominating the big data market, the big data introduction of domestic corporations can not but to be dependent on the foreign corporations. When considering that fact, that our country does not have global IT corporations even though it is world powerful IT country, the big data can be thought to be the chance to rear world level corporations. Accordingly, the government shall need to rear star corporations through active political support. Third, the corporations' internal and external professional manpower for the big data introduction and operation lacks. Big data is a system where how valuable data can be deducted utilizing data is more important than the system construction itself. For this, talent who are equipped with academic knowledge and experience in various fields like IT, statistics, strategy and management etc and manpower training should be implemented through systematic education for these talents. This study has arranged theoretical base for empirical studies about big data related fields by comprehending the main variables which affect the big data introduction intention and verifying them and is expected to be able to propose useful guidelines for the corporations and policy developers who are considering big data implementationby analyzing empirically that theoretical base.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.