• The Korean Journal of Pesticide Science
• /
• v.19 no.1
• /
• pp.5-13
• /
• 2015

A chromatographic method for the determination of imazapyr, a non-selective herbicide, in agricultural commodities was developed to use safety control of pesticide residue on crops, and was fully validated as an official method for residue analysis. Agricultural commodities, mandarin (fruit), hulled rice (cereal grains), pepper (vegetables), potato (potatoes) and soybean (beans) were extracted with methanol and partitioned with dichloromethane to remove the interference obtained from sample extracts, adjusting pH to 2.5 by 4N hydrochloric acid. Finally, they were analyzed by high performance liquid chromatography coupled to UV detector (HPLC-UVD). The developed method had the linearity in the range of test concentrations with coefficients of determination ($r^2$) more than 0.99. Recovery studies were carried out at three concentration levels (LOQ, 10LOQ, and 50LOQ) performing five replicates at each level. Recoveries were ranged between 72.1 to 108.0%, with relative standard deviations less than 10%. A consistent recovery was determined according to the CODEX guidelines (CAC/GL40, 2003). Finally, LC/MS with selected ion monitoring was also applied to confirm the suspected residues of imazapyr in agricultural samples. This developed method for determination of imazapyr residues in agricultural commodities. can be used as an official method.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.343-355
• /
• 2007

The objectives of this study was to evaluate the durability of 4 resin cements by means of microtensile bond strength test combined with thermocycling method and fractographic FE-SEM analysis. Experimental groups were prepared according to thermocycling (0, 1,000, 5,000) and the kind of resin cements, those were Variolink II, Multilink, Panavia F 2.0, Rely X Unicem. Flat dentin surfaces were created on mid-coronal dentin of extracted third molars. Then fresh dentin surface was grounded with 320-grit silicon carbide abrasive papers to create uniform smear layers. Indirect composite block (Tescera, Bisco Inc., Schaumburg, IL, USA) was fabricated ($12\;{\times}\;12\;{\times}\;6\;mm^3$). It's surface for bonding to tooth was grounded with silicon carbide abrasive papers from 180- to 600-grit serially, then sandblasted witk $20\;-\;50\;{\mu}m$ alumina oxide. According to each manufacturer's instruction, dentin surface was treated and indirect composite block was luted on it using each resin cement. For Rely X Unicem, dentin surface was not treated. The bonded tooth-resin block were stored in distilled water at $37^{\circ}C$ for 24 hours. After thermocycling, the bonded tooth-resin block was sectioned occluso-gingivally to 1.0 mm thick serial slabs using all Isomet slow-speed saw (Isomet, Buehler Ltd, Lake Bluff, IL, USA). These sectioned slabs were further sectioned to $1.0\;{\times}\;1.0\;mm^2$ composite-dentin beams. The specimens were tested with universal testing machine (EZ-Test, Shimadzu, Japan) at a crosshead speed of 1.0 mm/min with maximum load of 500 N. The data was analyzed using one-way ANOVA and Duncan's multiple comparison test at $p\;{\leq}\;0.05$ level. Within the limited results, we conclude as follows; 1. The bond strength of Variolink II was evaluated the highest among experimental groups and was significantly decreased after 1,000 thermocycling (p < 0.05). 2. The bond strength of Multilink was more affected by thermocycling than the other experimental groups and significantly decreased after 1,000 thermocycling (p < 0.05). 3. Panavia F 2.0 and Rely X Unicem showed the gradually decreased tendency of microtensile bond strength according to thermocycling but there was no significant difference (p > 0.05). 4. Adhesive based-resin cements showed lower bond strength with or without thermocycling than composite based-resin cements. 5. Variolink II & Multilink showed high bond strength and mixed failure, which was occurred with a thin layer of luting resin cement before thermocycling and gradually increased adhesive failure along the dentin surface after thermocycling. The bonding performance of resin cement can be affected by application procedure and chemical composition. Composite based-resin cement showed higher bond strength and durability than adhesive based-resin cement.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.117-127
• /
• 2007

The exposed aggregate PCC(EAP) pavements have been successfully used in Europe and Japan as low-noise pavements. Coarse aggregate are exposed on the pavement surface texture of EAP by removing mortar of surface. The pavement surface texture should maintain not only low-noise characteristic but also adequate skid resistance level during the performance period. Skid resistance decreased with wearing and polishing of tire and pavement surface due to the repetition of tire-pavement contact. Since the tires mainly contact the exposed coarse aggregate, the shape and rock type of coarse aggregate significantly influence wearing and polishing of EAP pavements. The test for resistance to abrasion coarse aggregate by use of the Los Angeles machine(KS F 2508) and the method of test for resistance to abrasion coarse aggregate by use of the Accelerated Polishing Machine(ASTM D 3319-90) are generally used to evaluate polishing characteristics of aggregate. In this study, polishing of coarse aggregate of different five rock types were evaluated by KS F 2508(LA abrasion test) and ASTM D 3319-90(PSV method). The results of LA abrasion test and PSV method were contrary to each other. Since LA abrasion test is estimated the quantity of abrasion by the impact of aggregate, it may not be adequate to evaluate the polishing of aggregate by the repetition of tire. In the case of PSV method, the resistance of polishing is estimated the skid resistance variation of polished aggregate after repetition of tire. The PSV method is adequate for the evaluation on polishing of coarse aggregate. From the test results of PSV method, it was founded that rock type, specific gravity, coarse aggregate angularity, flat or elongated particles in coarse aggregate are significant to the resistance characteristic of coarse aggregate.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_2
• /
• pp.1117-1132
• /
• 2019

Forest covers 30% of the Earth's land area and plays an important role in global carbon flux through its ability to store much greater amounts of carbon than other terrestrial ecosystems. The Gross Primary Production (GPP) represents the productivity of forest ecosystems according to climate change and its effect on the phenology, health, and carbon cycle. In this study, we estimated the daily GPP for a forest ecosystem using remote-sensed data from Moderate Resolution Imaging Spectroradiometer (MODIS) and machine learning algorithms Support Vector Machine (SVM). MODIS products were employed to train the SVM model from 75% to 80% data of the total study period and validated using eddy covariance measurement (EC) data at the six flux tower sites. We also compare the GPP derived from EC and MODIS (MYD17). The MODIS products made use of two data sets: one for Processed MODIS that included calculated by combined products (e.g., Vapor Pressure Deficit), another one for Unprocessed MODIS that used MODIS products without any combined calculation. Statistical analyses, including Pearson correlation coefficient (R), mean squared error (MSE), and root mean square error (RMSE) were used to evaluate the outcomes of the model. In general, the SVM model trained by the Unprocessed MODIS (R = 0.77 - 0.94, p < 0.001) derived from the multi-sites outperformed those trained at a single-site (R = 0.75 - 0.95, p < 0.001). These results show better performance trained by the data including various events and suggest the possibility of using remote-sensed data without complex processes to estimate GPP such as non-stationary ecological processes.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.417-428
• /
• 2011

Depending on the plastic deformation capacity required, structural steel design under the current codes can be classified into three categories: elastic, plastic, and seismic design. Most of the current steel codes explicitly forbid the use of a steel material with a yield strength higher than 450 MPa in the plastic design because of the concerns about its low plastic deformation capacity as well as the lack of test data on local and lateral torsional buckling behavior. In this study, flexural tests on full-scale H-shape members built with SM490A (ordinary steel or benchmark material) and HSB800 (high-strength steel) were carried out. The primary objective was to investigate the appropriateness of extrapolating the local buckling criterion of the current codes, which was originally developed for normal-strength steel, to the case of high-strength steel. All the SM490A specimens performed consistently with the current code criteria and exhibited sufficient strength and ductility. The performance of the HSB800 specimens was also very satisfactory from the strength perspective; even the specimens with a noncompact and slender flange developed the plastic moment capacity. The HSB800 specimens, however, showed an inferior plastic rotation capacity due to the premature tensile fracture of the beam bottom flange beneath the vertical stiffener at the loading point. The plastic rotation capacity that was achieved was less than 3 (or the minimum level required for a plastic design). Although the test results in this study indicate that the extrapolation of the current flange local-buckling criterion to the case of high-strength steel is conservative from the elastic design perspective, further testing together with an associated analytical study is required to identify the causes of the tensile fracture and to establish a flange slenderness criterion that is more appropriate for high-strength steel.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.503-514
• /
• 2011

In this research, the seismic connection details for two concrete-filled U-shape steel beam-to-H columns were proposed and cyclically tested under a full-scale cruciform configuration. The key connecting components included the U-shape steel section (450 and 550 mm deep for specimens A and B, respectively), a concrete floor slab with a ribbed deck (165 mm deep for both specimens), welded couplers and rebars for negative moment transfer, and shear studs for full composite action and strengthening plates. Considering the unique constructional nature of the proposed connection, the critical limit states, such as the weld fracture, anchorage failure of the welded coupler, local buckling, concrete crushing, and rebar buckling, were carefully addressed in the specimen design. The test results showed that the connection details and design methods proposed in this study can well control the critical limit states mentioned above. Especially, the proposed connection according to the strengthening strategy successfully pushed the plastic hinge to the tip of the strengthened zone, as intended in the design, and was very effective in protecting the more vulnerable beam-to-column welded joint. The maximum story drift capacities of 6.0 and 6.8% radians were achieved in specimens A and B, respectively, thus far exceeding the minimumlimit of 4% radians required of special moment frames. Low-cycle fatigue fracture across the beam bottom flange at a 6% drift level was the final failure mode of specimen A. Specimen B failed through the fracture of the top splice plate of the bolted splice at a very high drift ratio of 8.0% radian.

• Korean Journal of Poultry Science
• /
• v.17 no.3
• /
• pp.167-177
• /
• 1990

In order to investigate an effect of the feed restriction on the laying performance, 208 White Leghorn strain layer of 36 week-old were divided to 4 groups of 52 birds each and raised for 1 week of previous feeding and for the subsequent 3 weeks of experimental restricted feeding. The egg production, daily egg mass and feed efficiency of four groups of birds fed daily 100g, 95g, 90f and 85g of a commercial diet, respectively, which were compared with those of the original 2879 birds fed l13g of diet per day as control. During 3 weeks of experimental restricted feeding, period, daily body weight nam was decreased linearly as the degree of restriction increased in birds fed 100, 95, 90 and 85g of diet. Hen day egg production, egg weight and daily egg mass was linearly related to the diet intake level. then feed intake(x, g day$^{-1}$ ) showed a positive regression equations with the henday egg production(y, % ), egg weight(y, g egg$^{-1}$ ) and egg mass(y, g bird$^{-1}$ ) as y＝38.75＋0.3753$\times$(r＝0.503, n＝15), y＝48.2＋0.08868$\times$(r＝0.835, n＝ 15) and y＝15.69＋0.2786$\times$(r＝0.597, n＝15), respectively. Feed efficiency was increased to a plateau in birds fed 95g of diet. The estimated energy utilization for egg production was reached to a plateau in birds fed 95g of diet and the highst protein utilization was shown in birds fed 90g of diet anions birds fed graded levels of diet. And the feed restriction did not affect on the egg shell contents, while protein contents of egg were shown a trend to be increased and lipids and cholesterol contents of eggs was decreased according to the diet intake lowered. The results suggested that the improved feed efficiencies of birds restricted under 16% of diet(above 95g of diet) will be due to increased energy and protein utilization for egg production and feed restriction above 16% will be aboided. In the range from 113g to 95g of diet feeding, the crude profit was increased as the feed restricted in the case of egg price 600 won kg$^{-1}$ and feed price 200 won kg$^{-1}$ .

• Korean Journal of Poultry Science
• /
• v.16 no.3
• /
• pp.149-156
• /
• 1989

Two broiler experiments were carried out to determine whether supplementation of zeolite in the diet would affect broiler performance and economical efficiency. Day old male broiler chickens of Abor Acres strain were used. In the first experiment,60 birds were distributed into f groups of 10 birds each. Three groups of chickens were randomly placed on one of the following single-stage (0-6wks) experimental diets； control diet (non-supplemented) or 2% zeolite supplemented diet (supplemented to the control). In the second experiment,216 birds were distributed into 24 groups of 9 birds each. Eight groups of chickens were randomly placed on one of the 3 two-stage diet (starter；0-4wks, finisher；5-7wks)；control diet ($T_1$ , non-supplemented), 2% zeolite diet ($T_2$：isocaloric and isonitrogenous as $T_1$ ) and 2% zeolite supplemented diet ($T_3$, supplemented to the control). Birds were housed in the batteries, and feeds and water were fed ad libitum. The results of Experiment 1 showed that birds fed control diet were heavier than those fed 2% zeolite supplemented diet up to 4th wks of age. However, birds fed the latter grew more at 5th and 6th wk. Overall weight gain, feed intake and feed efficiency were not significantly different. The results of Experiment 2 showed that there were no significant differences in weight gains, feed intakes and feed efficiencies among treatments during starter, finisher to overall period. The moisture levels in excreta of the birds were significantly (P＜0.01) less when zeolite was included in the diets and those in excreta significantly (P ＜ 0.01) increased as the ambient temperature increased. Economical efficiency expressed in fed cost (won) required per kg weight gin were 346.55 (T$_3$),348.34 ($T_1$ ) and 359.85 ($T_2$).

• Asia pacific journal of information systems
• /
• v.17 no.3
• /
• pp.105-130
• /
• 2007

Recently, there is a substantial interest in implementing Business Process Management System(BPMS) among enterprises with the purpose of business process innovation. BPMS redesigns and coordinates business processes in terms of both automated steps and human involvement in order to maximize the value of both involved people and systems. The reason why BPMS is getting attention from top managers is that it has the possibility to optimize the business processes by cycling the process of modeling, execution, monitoring, evaluation, and redesigning work processes. Thus, it has created high expectations about not only productivity improvement but also business process innovation. However. having an innovative nature, which is used for process innovation, BPMS implementation has great potential to stir up employee resistance. The analysis and the discussion about the prevention of the resistance against IS(Information Systems) is important because IS change the way people work and also alter the power structure within the organization, in general. The purpose of this study is to investigate factors that have an impact on the effective adoption of BPMS at the enterprise level. To find out these factors, this study considers two characteristics of BPMS: First. BPMS shares some characteristics with other enterprise-wide IS such as ERP. Second, it has special BPMS-specific characteristics. Due to the lack of previous research on BPMS adoption, interviews were carried out with IT-consultants and CIOs who conducted BPMS projects previously to find out BPMS-specific features that would make BPMS unique when compared to other enterprise-wide IS. As a result, the monitoring function was chosen as the main BPMS-specific factor. Thus, this paper reviewed studies both on enterprise-wide IS adoptions, which applied Technology Acceptance Model (TAM) and secondly on computer based monitoring to find out factors that would influence the employees' perception on the monitoring function of BPMS. Based on the literature review, the study suggested three factors that would have an impact on the employee's perception of the monitoring function: fairness of enterprise evaluation system, fairness of the boss, and self-efficacy of their work. Three factors that would impact the enterprise-wide IS adoption were also set: the shared belief in the benefit of BPMS, training, and communication. Then, these factors were integrated with TAM. Structural equation modeling was used to test hypotheses, out factors that would impact the employees' perception on the monitoring function of BPMS. Based on the literature review the study suggested three factors that would have an impact on the employee's perception of the monitoring function: fairness of enterprise evaluation system, fairness of the boss, and self-efficacy of their work. Three factors that would impact the enterprise-wide IS adoption were also set: the shared belief in the benefit of BPMS, training, and communication. Then, these factors were integrated with TAM. Structural equation modeling was used to test hypotheses. The data analysis results showed that two among three monitoring function related factors - enterprise evaluation system and fairness of the boss - were significant. This implies that employees would worry less about the BPMS implementation as long as they perceive the monitoring results will be used fairly for their performance evaluation. However, employees' high self-efficacy on their job was not a significant factor in their perception of the usefulness of BPMS. This is related to cases that showed employees resisted against the information systems because they automated their works (Markus, 1983). One specific case was an electronic company, where the accounting department workers were requested to redefine their job because their working processes were automated due to BPMS implementation.

• Asia pacific journal of information systems
• /
• v.24 no.4
• /
• pp.611-635
• /
• 2014

Information systems (IS) have become ubiquitous and changed every aspect of how people live their lives. While some IS have been successfully adopted and widely used, others have failed to be adopted and crowded out in spite of remarkable progress in technologies. Both the technology acceptance model (TAM) and the IS Success Model (ISSM), among many others, have contributed to explain the reasons of success as well as failure in IS adoption and usage. While the TAM suggests that intention to use and perceived usefulness lead to actual IS usage, the ISSM indicates that information quality, system quality, and service quality affect IS usage and user satisfaction. Upon literature review, however, we found a significant void in theoretical development and its applications that employ either of the two models, and we raise research questions. First of all, in spite of the causal relationship between intention to use and actual usage, in most previous studies, only intention to use was employed as a dependent variable without overt explaining its relationship with actual usage. Moreover, even in a few studies that employed actual IS usage as a dependent variable, the degree of actual usage was measured based on users' perceptual responses to survey questionnaires. However, the measurement of actual usage based on survey responses might not be 'actual' usage in a strict sense that responders' perception may be distorted due to their selective perceptions or stereotypes. By the same token, the degree of system quality that IS users perceive might not be 'real' quality as well. This study seeks to fill this void by measuring the variables of actual usage and system quality using 'fact' data such as system logs and specifications of users' information and communications technology (ICT) devices. More specifically, we propose an integrated research model that bring together the TAM and the ISSM. The integrated model is composed of both the variables that are to be measured using fact as well as survey data. By employing the integrated model, we expect to reveal the difference between real and perceived degree of system quality, and to investigate the relationship between the perception-based measure of intention to use and the fact-based measure of actual usage. Furthermore, we also aim to add empirical findings on the general research question: what factors influence actual IS usage and how? In order to address the research question and to examine the research model, we selected a mobile campus application (MCA). We collected both fact data and survey data. For fact data, we retrieved them from the system logs such information as menu usage counts, user's device performance, display size, and operating system revision version number. At the same time, we conducted a survey among university students who use an MCA, and collected 180 valid responses. A partial least square (PLS) method was employed to validate our research model. Among nine hypotheses developed, we found five were supported while four were not. In detail, the relationships between (1) perceived system quality and perceived usefulness, (2) perceived system quality and perceived intention to use, (3) perceived usefulness and perceived intention to use, (4) quality of device platform and actual IS usage, and (5) perceived intention to use and actual IS usage were found to be significant. In comparison, the relationships between (1) quality of device platform and perceived system quality, (2) quality of device platform and perceived usefulness, (3) quality of device platform and perceived intention to use, and (4) perceived system quality and actual IS usage were not significant. The results of the study reveal notable differences from those of previous studies. First, although perceived intention to use shows a positive effect on actual IS usage, its explanatory power is very weak ($R^2$=0.064). Second, fact-based system quality (quality of user's device platform) shows a direct impact on actual IS usage without the mediating role of intention to use. Lastly, the relationships between perceived system quality (perception-based system quality) and other constructs show completely different results from those between quality of device platform (fact-based system quality) and other constructs. In the post-hoc analysis, IS users' past behavior was additionally included in the research model to further investigate the cause of such a low explanatory power of actual IS usage. The results show that past IS usage has a strong positive effect on current IS usage while intention to use does not have, implying that IS usage has already become a habitual behavior. This study provides the following several implications. First, we verify that fact-based data (i.e., system logs of real usage records) are more likely to reflect IS users' actual usage than perception-based data. In addition, by identifying the direct impact of quality of device platform on actual IS usage (without any mediating roles of attitude or intention), this study triggers further research on other potential factors that may directly influence actual IS usage. Furthermore, the results of the study provide practical strategic implications that organizations equipped with high-quality systems may directly expect high level of system usage.