• Earthquakes and Structures
• /
• v.11 no.5
• /
• pp.809-822
• /
• 2016

Reinforced concrete buildings constitute the majority of the building stock of Turkey and much of them, do not comply the earthquake codes. Recently there is a great tendency for strengthening to heal their earthquake performance. The performance evaluations are usually executed by the numerical investigations performed in computer packages. However, the numerical models are often far from representing the real behaviour of the existing buildings. In this condition, experimental modal analysis fills a gap to correct the numerical models to be used in further analysis. On the other hand, there have been a few dynamic tests performed on the existing reinforced concrete buildings. Especially forced vibration survey is not preferred due to the inherent difficulties, high cost and probable risk of damage. This study applies both ambient and forced vibration surveys to investigate the dynamic properties of a six-story residential building in Istanbul. Mode shapes, modal frequencies and damping ration were determined. Later on numerical analysis with finite element method was performed. Based on the first three modes of the building, a model updating strategy was employed. The study enabled to compare the results of ambient and forced vibration surveys and check the accuracy of the numerical models used for the performance evaluation of the reinforced concrete buildings.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.10
• /
• pp.868-875
• /
• 2007

In this paper, performance characteristics of a domestic kim-chi refrigerator are predicted by using the theoretical calculation and experimental method. The objective of this study is to find out the best design points of the refrigeration system and to calculate an adiabatic characteristic with variation to outdoor temperatures. The best design points such as refrigerant charge amount and capillary length were experimentally investigated. And the theoretical calculation is conducted as a function of calculation parameters and outdoor temperatures. According to this study results, the best design points of a refrigeration system with 2 rooms are 95 g of a refrigerant charge amount and 3500 / 3500 mm of capillary lengths and the best design points of a refrigeration system with 3 rooms are 100 g of a refrigerant charge amount and 3000/3000/6000mm of capillary lengths. And the power consumptions of both systems are 13.57 and 18.2 kWh/month. The worst part of heat loss is a front side of a domestic kim-chi refrigerator body.

• Journal of Drive and Control
• /
• v.14 no.2
• /
• pp.9-15
• /
• 2017

The steering systems of all-terrain cranes have been developed with various control strategies for the stability and drivability. To optimally control the input steering angle, an accurate mathematical model that represents the actual crane dynamics is required. The derivation of an accurate mathematical model to optimally control the steering angle, however, is difficult since the steering-control strategy generally varies with the magnitude of the crane's longitudinal velocity, and the postures of the crane's working parts vary while it is being driven. To address this problem, this paper proposes an automatic steering-control algorithm that is based on the MPC (model predictive control) with a disturbance observer for all-terrain cranes. The designed disturbance observer of this study was used to estimate the error between the base steering model and the actual crane. A model predictive controller was used for the computation of the optimal steering angle, along with the use of the base steering model with an estimated uncertainty. Performance evaluations of the designed control algorithms were conducted based on a curved-path scenario in the Matlab/Simulink environment. The performance-evaluation results show a sound reference-path-tracking performance despite the large uncertainties.

• Journal of Mechanical Science and Technology
• /
• v.20 no.11
• /
• pp.1934-1941
• /
• 2006

As the operating time of heat exchangers progresses, fouling caused by water-borne deposits and the number of plugged tubes increase and thermal performance decreases. Both fouling and tube plugging are known to interfere with normal flow characteristics and to reduce thermal efficiencies of heat exchangers. The heat exchangers of Korean nuclear power plants have been analyzed in terms of heat transfer rate and overall heat transfer coefficient as a means of heat exchanger management. Except for fouling resulting from the operation of heat exchangers, all the tubes of heat exchangers have been replaced when the number of plugged tubes exceeded the plugging criteria based on design performance sheet. This paper describes a plugging margin evaluation method taking into account the fouling of shell-and-tube heat exchangers. The method can evaluate thermal performance, estimate future fouling variation, and consider current fouling level in the calculation of plugging margin. To identify the effectiveness of the developed method, fouling and plugging margin evaluations were performed at a component cooling heat exchanger in a Korean nuclear power plant.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.55-60
• /
• 2003

As operating time of heat exchangers progresses, fouling generated by water-borne deposits increases and thermal performance decreases. The fouling is known to interfere with normal flow characteristics and reduce thermal efficiencies of heat exchangers. The heat exchangers of nuclear power plants have been analyzed in terms of the heat flux and heat transfer coefficient at test conditions based on the ASME OM-S/G-Part 2 as a means of heat exchanger management. It is hard to estimate the heat performance trend and to establish the future management plan. This paper describes the fouling evaluation method which can evaluate the thermal performance for heat exchangers and estimate the future fouling variations and the plugging margin evaluation method which can reflect the current fouling level developed in this study. To develop the fouling and plugging margin evaluation methods for heat exchangers, fouling factor was introduced based on the ASME O&M codes and TEMA standards. For the purpose of verifying the two evaluation methods, the fouling and plugging margin evaluations were performed for a component cooling heat exchanger in a nuclear power plant.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.5
• /
• pp.836-858
• /
• 2010

Web Services allow a user to integrate applications from different platforms and languages. Since mobile applications often run on heterogeneous platforms and conditions, Web Service becomes a popular solution for integrating with server applications. However, because of its verbosity, XML based SOAP messaging gives the possible overhead to the less powerful mobile devices. Based on the mobile client's behavior that it usually exchanges messages with Web Service continuously in a session, we design the Handheld Flexible Representation architecture. Our proposed architecture consists of three main components: optimizing message representation by using a data format language (Simple_DFDL), streaming communication channel to reduce latency and the Context-store to store context information of a session as well as redundant parts of the messages. In this paper, we focus on the Context-store and describe the architecture with the Context-store for improving the performance of mobile Web Service messaging. We verify our approach by conducting various evaluations and investigate the performance and scalability of the proposed architecture. The empirical results show that we save 40% of transit time between a client and a service by reducing the message size. In contrast to solutions for a single problem such as the compression or binarization, our architecture addresses the problem at a system level. Thus, by using the Context-store, we expect reliable recovery from the fault condition and enhancing interoperability as well as improving the messaging performance.

• Journal of Internet Computing and Services
• /
• v.9 no.1
• /
• pp.171-177
• /
• 2008

In this paper we compared the performance of interpolation algorithms for Bayer patterned image sensors under the various illumination intensities. As the interpolation algorithms, we used bilinear color interpolation and adaptive fuzzy color interpolation and our experimentation shows that performance of interpolation algorithms depend on the lighting conditions; in low intensity of illumination, bilinear color interpolation with median filter performs best, in high intensity of illumination, adaptive fuzzy color interpolation performs best, and in between bilinear color interpolation performs best. This study suggested an interpolation scheme which applies different interpolation algorithm according to the intensity of the input image, resuting in the better image quality.

• Journal of Korea Game Society
• /
• v.1 no.1
• /
• pp.61-67
• /
• 2001

This paper describes a program which learns good strategies for two-poison, deterministic, zero-sum board games of perfect information. The program learns by simply playing the game against either a human or computer opponent. The results of the program's teaming of a lot of games are reported. The program consists of search kernel and a move generator module. Only the move generator is modified to reflect the rules of the game to be played. The kernel uses a temporal difference procedure combined with a backpropagation neural network to team good evaluation functions for the game being played. Central to the performance of the program is the search procedure. This is a the capture tree search used in most successful janggi playing programs. It is based on the idea of using search to correct errors in evaluations of positions. This procedure is described, analyzed, tested, and implemented in the game-teaming program. Both the test results and the performance of the program confirm the results of the analysis which indicate that search improves game playing performance for sufficiently accurate evaluation functions.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.6
• /
• pp.36-44
• /
• 1998

R-410a and R-407c which have the best potential among R-22 alternatives were tested as drop-in refrigerants against a set of R-22 baseline tests. The performance evaluations were carried out in a psychometric calorimeter test facility using the residential spilt type air conditioner under the ARI rating conditions. Except the lubricant and hand-operated expansion valve, the other parts of the air conditioner were the same with the commercial system. Performance characteristics were measured; compressor power, capacity, VCR, mass flow rate and COP. The tests showed that R-407c can be directly charged into the current refrigeration system because its vapor pressure and other thermochemical properties are similar to those of R-22. However, it is required to change the volume flow rate of compressor in order to achieve the volumetric capacity of R-22. This results from its relatively small VCR and capacity. Meanwhile, R-410a has vapor pressure values too high to be substituted for the current system and this resulted relatively low COP of R-410a compared to that of R-22.

• Journal of the Korean Dietetic Association
• /
• v.16 no.2
• /
• pp.146-159
• /
• 2010

This study was conducted to determine the appropriateness of the indicators and items on teacher evaluations for professional development and to provide insight for their improvement. To accomplish this, the perception of the importance and performance frequency of 318 nutrition teachers regarding their roles inherent in the indicators and items were evaluated through a survey questionnaire based on a five-point Likert scale. The quantitative data were analyzed using descriptive statistics and a paired t-test. In addition, the reflective analysis and constant comparison method were employed to analyze the responses to the open-ended questions asking problems in the indicators and items. The results revealed that the mean scores for the importance and performance frequency of most indicators and items were over four points, which implies that most indicators and items are appropriate for evaluating the job tasks of nutrition teachers. However, it was suggested that a few items be revised or removed for their improvement and appropriateness. This study concluded that nutrition teachers should have more chances to provide nutrition education for students to enable them to perform as teachers and not simply dietitians.