• 한국항공운항학회지
• /
• 제20권4호
• /
• pp.7-13
• /
• 2012

This paper is to estimate aerodynamic coefficients needed to determine the missiles' controller design and stability from simulation data of Skid-to-Turn missile. Method of determining aerodynamic coefficients is to apply Neural Network and Recursive Least Square and results were compared and researched. Also analysing actual flight test data was considered and sensor noise was added. Estimate parameter of data with sensor noise added and estimated performance and reliability for both methods that did not need initial values. Both Neural Network and Recursive Least Square methods showed excellent estimate results without adding the noise and with noise added Neural Network method showed better estimate results.

• Journal of Astronomy and Space Sciences
• /
• 제24권4호
• /
• pp.431-450
• /
• 2007

천체의 장시간 노출을 위한 망원경 자동추적장치는 CCD 카메라의 성상 관측결과를 피드백하여 제어한다. 그러나 대기 시상효과에 의해 성상 관측의 정확도가 변하면 제어의 정확도도 달라진다. 본 연구에서는 제어공학에서 사용하는 이산시간 동적 이론을 적용하여 자동추적장치의 효율을 극대화 할 수 있는 이론을 개발하였다. 망원경의 추적장치에 기계적인 오차가 있는 경우, CCD 카메라의 성상 관측결과에 나타나는 대기시상 효과를 구체적으로 모델링한 후, 제안된 성능지표에 주는 영향을 수식적으로 유도하고 분석하였다. 그리고 기계적인 오차와 대기시상 값의 이론적인 상관관계를 실제 관측 실험을 수행하여 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.447-449
• /
• 1994

This paper deals with the static characteristics of filters at the AC source in single phase PWM converter using hysterisis current control method. The filters are needed to reduce the current harmonics. In general, there are two kinds of filters which can be used for current controlled PWM converter. One is the low pass filter, the other is the resonant filter for a frequency. This paper designs these filters by analysing the characteristics. And these filters are compared through performance index such as harmonic reduction factor and the value of components which make up filters.

• 한국벤처창업학회:학술대회논문집
• /
• 한국벤처창업학회 2006년 춘계학술발표회
• /
• pp.139-166
• /
• 2006

This paper explored strategic types of Korean SMEs in manufacturing industries and investigated key differences among strategic types by analysing firm size, product market, technological capabilities and performances. According to previous studies, this papers categorized SMEs into four strategic types-technological innovative SMEs, multi-product SMEs, capital-intensive SMEs, and OEM-based SMEs types. Based on the empirical survey from 1,077 Korea SMEs in diverse industries, there are significant differences among strategic types on the key characteristics including product market, resource capability and performance. Finally this paper suggested implications for the studies on SMEs and managerial and policy directions to support SMEs.

• 한국멀티미디어학회논문지
• /
• 제20권10호
• /
• pp.1637-1645
• /
• 2017

Target/Nontarget classification can be divided into the study of shape estimation of the target analysing reflected echo signal and of type classification of the target using acoustical features. In active sonar system, the feature vectors are extracted from the signal reflected from the target, and an classification algorithm is applied to determine whether the received signal is a target or not. However, received sonar signals can be distorted in the underwater environments, and the spatio-temporal characteristics of active sonar signals change according to the aspect of the target. In addition, it is very difficult to collect real sea-trial data for research. In this paper, target/non-target classification were performed using real sea-trial data. Feature vectors are extracted using MFCC(Mel-Frequency Cepstral Coefficients), filterbank energy in the Fourier spectrum and wavelet domain. For the performance verification, classification experiments were performed using backpropagation neural network classifiers.

• The Journal of the Acoustical Society of Korea
• /
• 제16권2E호
• /
• pp.62-69
• /
• 1997

The effect of pitch on tone durations was studied in several poeces of music. In previous work it was found that higher pitched sounds, of a given duration, were perceived to be of longer duration. That work however, was not undertaken in a musical context. The present work was done to determine whether the previously observed trend was also apparent in musical performances. Several measurements were undertaken. One of these involved analysing the recorded performance duration of notes in several performances of the Mozart Flute Quartet in A-mojor, K.298. Performed durations were also obtained from a Bach Flute Sonata and a Brahms Clarinet Quintet. An analysis of the musical performances revealed that while there were individual differences and exceptions in notes, the musicians tended to play higher notes significantly shortened.

• 한국항행학회논문지
• /
• 제13권3호
• /
• pp.406-411
• /
• 2009

본 논문에서는 GSM(Global System for Mobile communication) 방식의 이동전화기에서 TDMA 잡음을 분석하기 위하여 잡음 대책 방법에 대하여 알아보고, 또한 잡음의 발생 원인에 대하여 기술한다. 또한 잡음 대책 방법 중 차이분석법을 이용하여 MIC를 shielding하고, 비드나 캐퍼시턴스를 장착하고, PCB의 Ground 보강으로 TDMA 잡음을 9dB, 3.5dB, 6dB 감소시켰다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1155-1162
• /
• 2004

This research proposes a new risk analysis method in order to guarantee successful performance of construction projects. The proposed risk analysis methods consists of four phases. First step, AHP model can help contractors decide whether or not they bid for a project by analysing risks involved in the project. Second step, the influence diagraming, decision tree and Monte Carlo simulation are used as tools to analyze and evaluate project risks quantitatively. Third step, Monte Carlo simulation is used to assess risk for groups of activities with probabilistic branching and calendars. Finally, Fuzzy theory suggests a risk management method for construction projects, which is using subjective knowledge of an expert and linguistic value, to analyze and quantify risk. The result of study is expected to improve the accuracy of risk analysis because three factors, such as probability, impact and exposure, for estimating membership function are introduced to quantify each risk factor. Consequently, it will help contractors identify risk elements in their projects and quantify the impact of risk on project time and cost.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.48.1-48.1
• /
• 2011

In this presentation, We monitored weather data, such as global irradiance, ambient temperature, temperature of PV module, relative humidity and windspeed for 2 years, for determining accelerated test condition. then, we determined the temperature limit of accelerated test through weather data and FEM analysis. Detailed procedures will be summarized in this work. After analysing outdoor stress such as thermal stress, we decided main failure modes and mechanisms of PV module, especially solder joint of ribbon wire. we carried out the measurement of material properties such as thermal expansion coefficient for planning of accelerated test. we designed accelerated test based on FEM analysis results. we carried out thermal cycling test with 1 cell mini module for 3 months. We monitored the change of electrical performance every 1 week such as Voc, Isc, Pmax, etc. and then, we analized the ribbon wire/electrode intefaces. Detailed results will be summarized in this work.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.434-437
• /
• 2006

Structures tend to become high-rise, large and specialized due to the urban concentration. Technology related to the structure and construction is required to improve, for which the use of high strength concrete(HSC) with better material property, and composite member with the combined advantage of both concrete and steel for better performance, is suggested. Over a half of fires, which increase by over 10% every year recently, come from the architectural structure, causing a loss at national level. However, little study has been conducted on the member at high temperature despite the increase in the use of HSC composite members. In this study, the techniques of modeling for analysing by DIANA (Displacement Analyzer) the fire damaged HSC composite compressive members are researched. We can review the effect of change in the steel ratio, section size and the steel ratio on the residual strength of structural members by parameter analysis study.