• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1209-1213
• /
• 1991

This paper describes a new method for performance improvement ultrasonic ranging system using V40 controller. Detectable range of ultrasonic ranging system depends on transducer frequency and bandwidth of the receiver, and damping of the transducer, etc. Conventional ranging systems are somewhat inaccurate because they do not have capability of compensating changes in medium condition. The novel ranging system overcomes this disadvantage by placing in the same medium a dummy sensor functioning as a standard calibrating instrument and by providing data processing capability using V40 controller.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.691-694
• /
• 1999

This paper presents a performance improvement technique of 2-D towed array shape estimation using Kalman filters. The proposed algorithm by linear model approximation corrects the position errors caused by the Kalman filter results. However, since the assumed linear model makes errors at bending parts, the spline interpolation algorithm based on curve is proposed to reduce the errors.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.584-587
• /
• 2003

Iterative learning control is an approach to improve the transient response of systems that operate repetitively over a fixed time interval. It is useful for the system where the system output follows the different type input, in case of design or modeling uncertainty In this paper, we introduce the concept of iterative learning control and then apply the learning control algorithm for multi-motor system for performance Improvement.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.187-190
• /
• 2002

In this paper, we deal with performance improvement of OBE for automatic gate clearance system by using DSRC network of 5.8GHz ISM band. A data format is improved to represent Rx and Tx information which is need to perform clearance at the gate of container terminal. An error message caused by data discordance is added to Previous data format. A graphic LCD monitor is used to control a character font and use Korean.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.550-554
• /
• 2004

This paper describes the performance improvement of switchgear. G/S(Gas Switch) is a common and very important facility in distribution system. In this paper We analyze the cause of trouble with operating switches. Using the conclusion through the investigation We propose the countermeasure of a malfunction in switching equipment.

• The KIPS Transactions:PartD
• /
• v.12D no.3 s.99
• /
• pp.417-428
• /
• 2005

Today, IT organizations perform projects with vision related to marketing and financial profit. The objective of realizing the vision is to improve the project performing ability in terms of QCD. Organizations have made a lot of efforts to achieve this objective through process improvement. Large companies such as IBM, Ford, and GE have made over $80\%$ of success through business process re-engineering using information technology instead of business improvement effect by computers. It is important to collect, analyze and manage the data on performed projects to achieve the objective, but quantitative measurement is difficult as software is invisible and the effect and efficiency caused by process change are not visibly identified. Therefore, it is not easy to extract the strategy of improvement. This paper measures and analyzes the project performance, focusing on organizations' external effectiveness and internal efficiency (Qualify, Delivery, Cycle time, and Waste). Based on the measured project performance scores, an OT (Opportunity Tree) model was designed for optimizing the project performance. The process of design is as follows. First, meta data are derived from projects and analyzed by quantitative GQM(Goal-Question-Metric) questionnaire. Then, the project performance model is designed with the data obtained from the quantitative GQM questionnaire and organization's performance score for each area is calculated. The value is revised by integrating the measured scores by area vision weights from all stakeholders (CEO, middle-class managers, developer, investor, and custom). Through this, routes for improvement are presented and an optimized improvement method is suggested. Existing methods to improve software process have been highly effective in division of processes' but somewhat unsatisfactory in structural function to develop and systemically manage strategies by applying the processes to Projects. The proposed OT model provides a solution to this problem. The OT model is useful to provide an optimal improvement method in line with organization's goals and can reduce risks which may occur in the course of improving process if it is applied with proposed methods. In addition, satisfaction about the improvement strategy can be improved by obtaining input about vision weight from all stakeholders through the qualitative questionnaire and by reflecting it to the calculation. The OT is also useful to optimize the expansion of market and financial performance by controlling the ability of Quality, Delivery, Cycle time, and Waste.

• KIEAE Journal
• /
• v.17 no.2
• /
• pp.5-12
• /
• 2017

Purpose: Under the purpose of presenting the adequate remodeling period for the improvement of thermal insulation performance of external walls in deteriorated buildings, the change in external wall and residential environment problem(dew condensation) due to aged deterioration after the apartments were constructed in Korea were analyzed. Method: Temperature Difference Ratio Outside(TDRo) and Heat Flow Meter(HFM) were used as measurement methods to evaluate the thermal insulation performance of deteriorated buildings. For TDR evaluation, thermo-graphic camera was used to measure and analyze the surface temperature of external wall. Also, dew condensation evaluation was analyzed using the Temperature Difference Ratio Inside(TDRi). Result: As a result of analyzing thermal performance through TDRo, the first decline point of thermal insulation performance began after 14-16 years have passed since construction was completed, and after 20 years have passed the decline point of thermal insulation performance reappeared. As a result of analyzing U-value with HFM measurement method, the decline rate of external wall's thermal insulation performance is lower than 2% in average at around 5 years after completion, and 8.7% in average at 10-15 years, and over 10.2% in average at 20 years.

• Korean Institute of Interior Design Journal
• /
• no.29
• /
• pp.86-93
• /
• 2001

This study presents about the method of alternatives selection by considering wall performance and interior design. Wall is selected fur the object and 3 items of cost, performance, and design as the objective function for optimizing are determined. Thus the wall performance selected problems, which are improvement of insulation performance, sweaty prevention, sound insulation performance and design selected problems, which is satisfactory Improvement of users about Interior design. It is important to select alternatives that can satisfy the performance and design on the capital given as much as possible. But quantitative problem such as performance or expanses and qualitative problem such as design are not in the same dimension. Therefore this problem is a multi-criteria optimization problem and also has used AHP method as the method to solve these. Moreover GA is used to solve a problem of the alternatives occurrence, which is the characteristic of multi-criteria problem. This study presents the solution method on multi-criteria problem that has been mix loaded of quantitative problem and qualitative problem by using AHP(Analytic Hierarchy Process) and GA(Genetic Algorithm).

• Journal of Korean Society for Quality Management
• /
• v.43 no.2
• /
• pp.127-140
• /
• 2015

Purpose: To obtain the area for improvement, the Importance-Performance analysis(IPA) uses relatively simple questions, that is, satisfaction and importance at attribute level. However, no attempt has been made to consider the gap between own company's performance and those of competitors in IPA, in the field of quality management. This study is aimed to suggest a new prioritizing method for improvement and to test for validity of the proposed technique. Methods: This study used data collected from Song and Lim(2015), which is satisfaction of employees, customers and competitors as well as importance data for 7 quality attributes of K animal hospital. A correlation comparison with other priority methods such as Bacon(2003)'s model and Matzler and Hinterhuber(1998)'s QI index is conducted. Results: The priority results by the proposed method shows better in correlation coefficient with customer perceived priority for improvement than other methods. Conclusion: From the result of the current study, it can be concluded that the result of the proposed method is valid, while it is relatively easy to understand and analyze, and therefore no additional survey is necessary for improvement priority.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.1
• /
• pp.17-22
• /
• 2004

This study was carried out at the CWC of Chosun university for the purpose of resistance performance improvement of planing hull, and the results of the tests were confirmed cooperatively with WJFEL. G/T 100 ton class planing hull form was selected, and the improvement of hull form including appendages were performed by using some model test techniques. The model test scope comprises resistance relative tests including wave profile observation, trim and sinkage measurement and flow visualization tests at full load and trial conditions for one bare hull and for two appended hulls. The final wedge and spray strip combined with improved hull form showed about 1.0 knot speed improvement at both of full and trial conditions, and outstanding improvement for fore wave phenomena.