• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.2
• /
• pp.127-133
• /
• 2002

The objectives of this paper are to develop an advanced GAX cycle named HGAX (Hybrid Generator Absorber heat exchanger) cycle, and to study the effect of key parameters on the cycle performance and the hot-water temperature from the condenser. New types of the HGAX cycle are developed by adding a compressor between the generator and the condenser- Type C (performance improvement and reduction of the generator temperature) and Type D (Hot-water temperature application). The solution temperature in the generator outlet is reduced to 168$^{\circ}C$ with the COP improvement of 19% compared to the standard GAX cycle. The hot-water temperature from the condenser is raised to 106$^{\circ}C$ for panel heating (Ondol heating) application.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.6 no.1
• /
• pp.17-24
• /
• 2009

The performance improvement of a small-size integrated-type fully hydraulic breaker is studied in this paper. Mathematical modeling of the breaker is established and verified by experiment. Through sensitivity analysis using AMESim, the key design parameters are selected and nearly optimized to maximize the impact energy as well as to improve the dynamic characteristics such as the piston upper chamber pressure, piston and valve displacements. As a result, the impact energy, blows per minute(bpm) and output power are increased by 52.9%, 1%, and 55.6%, respectively compared with the current design. The dynamic characteristics of the piston upper chamber pressure, piston and valve displacements are also improved by the design change.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.211-212
• /
• 2015

Procurement and lifting scheduling of modules and resources in modular construction, where modules that are manufactured from factory are delivered and assembled on site, is a crucial factor that determines the efficiency of the whole construction. However, previous studies have barely acknowledged the significance of resource procurement process and lifting of modules in modular construction. Therefore, this research aims to derive factors that are in need of improvement for successful implementation of procurement and lifting efficiency, and visualize them according to their importance and performance on improvement through IPA(Important Performance Analysis).

• Journal of the Korea Safety Management & Science
• /
• v.19 no.1
• /
• pp.145-156
• /
• 2017

This study was conducted to grasp problems of the present and investigate the real condition of organizations by making how an organizational ISO/TS 16949 quality management system has a positive effect on process improvement, perceived organizational support has a significant effect on the relationship between ISO/TS 16949 requirements and process improvement, process improvement has a positive effect on customer satisfaction and organizational performance research projects. For doing them, it tris to suggest an effective application plan of ISO/TS 16949 certification through improvements about corporate quality management systems of the automobile field by investigating and analyzing literature of the precedent studies and ISO/TS 16949 certification effects actually, conducting and analyzing an survey on effects on customer satisfaction and organizational performance, and drawing the problems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.1
• /
• pp.19-26
• /
• 1998

In this paper, Simulation result was studied by PID controller in series to the estblised neural networks controller. Neural network model is composed of two layers to evaluate tracking performance improvement. The regular dynamics was also studied for the expected error to be minimized by using Widrow-Hoff delta rule. As a result of the study, We identified that tracking performance improvement was developed more in case of connecting PID than conventional neural network controller and that tracking plant parameter in 251 sample was approached rapidly in case of time varying.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.3
• /
• pp.137-143
• /
• 1996

The propulsion marine diesel engine has been widely applied with a mechanical-hydraulic governor to control the ship speed for long time. But it was recently very difficult for the mechanical-hydraullic governor to control the speed of engine under the condition of low speed and low load because of jiggling and hunting by rough fluctuation of rotating torque. To solve these problems of control systems, the performance improvement of mechanical-hydraulic governor is required. In this paper, in order to analyze the speed stability of control systems, the influence of parameters of the engine dead time, gain, damping ratio was discussed on the view of control engineering. The performance improvement of a conventional mechanical hydraulic governor is confirmed to be possible by fuzzy control scheme.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.10
• /
• pp.637-644
• /
• 2008

Auxiliary port which had been known to be used to reduce the expansion loss of a refrigeration system was applied to a R134a reciprocating compressor in a household refrigerator cycle with an intention of improving the compressor performance. Effects of the auxiliary port on the compressor performance was investigated by a computer simulation program. When a simple hole was made on the side wall of the cylinder as an auxiliary port and surrounding gas inside the compressor shell was assumed to be drawn into the cylinder through the hole, maximum COP improvement of 1.66% was obtained. With auxiliary port equipped with a plate type of check valve, maximum COP was raised to be 1.99%. COP improvement was more distinctive with decreasing the discharge pressure; COP improvement was 5% with discharge pressure of 7 bar.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.76-83
• /
• 2019

In this paper, we propose the beamforming algorithm for the performance improvement of MIMO MC-CDMA system. The proposed multibeamforming of MIMO MC-CDMA structure having the same number of beamformer as the number of transmit antenna is derived by calculating the error signals between the coded pilot symbols and the corresponding received signals from the multiple transmitters of the desired user in the frequency domain, transforming the frequency-domain error signals into time-domain error signals, and updating the weights of the multibeamformer in the time-domain in the direction minimizing the mean squared error (MSE). The proposed approach can track each direction of arrival (DOA) of the signals from multi-antennas of a desired user. The performance improvement is investigated through computer simulation by applying the proposed approach to MIMO MC-CDMA system in a multipath fading channel with multiusers.

• Asia pacific journal of information systems
• /
• v.29 no.2
• /
• pp.217-247
• /
• 2019

This paper draws on the interdependence theory to examine the role of power and mutual dependence on the relationship between internal/external diffusion and performance improvement within a supply chain. The results from a survey of 375 respondents show that two patterns of IOS diffusion - internal diffusion and external diffusion - have different impacts on a firm's performance improvement according to differences in power and mutual dependence between two parties in the supply chain.

• The Korean Journal of Health Service Management
• /
• v.10 no.1
• /
• pp.27-37
• /
• 2016

Objectives : This study applied the research model of Bontis (1998), which has been used to investigate everything from business corporations to hospitals in Korea, examined its generalizability and attempted to verify which factors of the intellectual capital affects organizational performance, represented by indicators for the clinical and financial performance of hospitals. Methods : Primary data for the study were collected from 91 general hospitals through self-administered questionnaires, and secondary data on clinical and financial performance of hospitals were collected form existing statistics. Collected data were analyzed with SPSS 11.5 (ver.) and AMOS 18.0 (ver.). Results : It was found that only human capital and customer capital had indirect effects on hospital performance. It was also revealed that structural capital had a direct effect on clinical performance, and an indirect effect on financial performance. Conclusions : This result means that there is a need to individually consider both the clinical performance and financial performance when measuring the organizational performance of a hospital, and it also shows that positive improvement in the clinical performance can contribute to the improvement of the financial performance through this process.