• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.17 no.4
• /
• pp.68-78
• /
• 2021

In order to solve the increasing deterioration of the energy shortage problem, ground-source heat pump (GSHP) systems have been widely installed. The control method is a significant component for maintaining the long-term performance and for reducing operation cost of GSHP systems. This paper presents the measurement and analysis results of the cooling performance of a GSHP system using capacity control with outdoor air temperature. For this, we installed monitoring equipments including sensors for measuring temperature, flow rate and power consumption, and then monitored operation parameters from July 9, 2021 to October 2, 2021. From measurement results, we analyze the effect of capacity control with outdoor air temperature on the cooling performance of the system. The average performace factor (PF) of the heat pump was 6.95, while the whole system was 5.54 over the measurement period. Because there was no performance data of the existing GSHP system, it was not possible to directly compare the existing control method and the outdoor air temperature method. However, it is expected that the performance of the entire system will be improved by adjusting the temperature of cold water produced by the heat pump, that is, the temperature of cold water on the load side according to the outside air temperature.

• Journal of KIBIM
• /
• v.5 no.2
• /
• pp.1-11
• /
• 2015

Despite a lot of research on BIM, there is no quantitative study to measure accurately the performance of BIM coordination service. Thus, this study suggested method to measure the performace of BIM coordination services, applying queueing models in the field of management science. To analyze queuing system of BIM coordination services, a group of BIM coordinator were selected. Through focus group interviews with experts were used in the analysis to derive mean arrival rate(${\lambda}$), mean service rate(${\mu}$) of BIM coordination services. Single-server queuing model(M/M/1), multiple server queuing model(M/M/s) is utilized for the BIM coordination services performance measurement in construction phase. This study has significant quantitative performance measurement approaches that can be utilized in the decision-making for the improvement of the BIM coordination services and to support the review of the alternatives accordingly. But There is a limit but it is difficult to take into account the increase or decrease of the cost of alternatives according to the review.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.197-207
• /
• 2014

In this paper, I propose an automatic extraction method of golf swing features using a practical TOF camera Kinect. I extracted 7 key swing frames and features using joints and depth information from a Kinect. I tested the proposed method on 50 swings from 10 players and showed the performace. It is meaningful that 3D swing features are extracted automatically using an inexpensive and simple system and specific numerical feature values can be used for the building of automatic swing analysis system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.4
• /
• pp.338-347
• /
• 1989

In this paper, the digital frequency synthesizer with the clock ccunting method is designed and implemented to increase the performace of the digital frequency synthesizer with pahse accumulating method which was developed before. Unlike an phase accumulating method, clock countind method is supplied a continually changeable clock frequency with PLL(Phase Locked Loop) and allocated a fixed phase step with N-ary counter. Form the experimenta results, it is confirmed that any periodic distorition phenomena are disappeared, and truncation harmonics are more reduced. But the output bandwidths are decreased in inverse proportion to the counter counting number and the circuits are somewhat complex than phase accumulating method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.3
• /
• pp.227-234
• /
• 1989

In this paper, a new receiver for a frequency-hopped multilevel FSK system for mobile Communications is presented. This new receiver provides an implementation advantage by eliminating unecessary energy detection of all the frequency channels. A performace analysis of the proposed system is carried out by using the union bound. We show that an optimim number of message bits that minimize the word error probability exists for a given number of simultaneous users. This scheme is a generalization of the MFSK system that allows the message bits to be uaried, making it possible for designers to increase the flexibility of implementation. Error probabilities are calculated in the case of fixed bandwidth and fixed tone repetition number. The effect of using error-correcting coding is considered.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.59-62
• /
• 2006

Formability is requested to successfully develop of a metal bipolar plate for mass production. From this point of view, wider channel and land width is more helpful to improve formability. But the performance of the fuel cell can be affected by its channel and land shape. So it is very important to select proper channel and land shape not to deteriorate the fuel cell performance. In this work, 3-dimensional, non-isothermal numerical simulation was performed to analyse the effects of channel and land width on the fuel cell performance. 3 types of straight channel were selected for the numerical simulation. The simulation results reveal that wide channel and land width lower fuel cell performance and decrease voltage at a high current density region. Water activity, temperature, oxygen concentration distributions were investigated to find the reasons of performance degradation. The results show that wide channel and land width give an bad effect on fuel cell performance because of low cool ins efficiency and lack of oxygen gas under the land.

• Journal of Advanced Navigation Technology
• /
• v.6 no.3
• /
• pp.241-250
• /
• 2002

This paper presents a way to maximize transmission efficiency and reception ability through transmission diversity technology, which can be adapted to wireless multimedia OFDM system. The presented method is a comparative analysis between a case where parameter ${\alpha}$ for time average is 0.3, 1 with consideration of channel presumption with two types of rms delayed spread, which is 50nsec, 150nsec, for the performance analysis of STTC(Space-Time Trellis Code) using time-space ciphering method appropriate for MIMO channel, and performance in the case where presumed channel value from long training column section is applied to according frame in a single frame. The result showed that BER brought SNR improvement of 1.0 dB in $10^{-3}$ when ${\alpha}$ was 0.3 than using only the long training column, and showed increase of general performance improvement for the sake of time average rather than the case without.

• Wind and Structures
• /
• v.19 no.1
• /
• pp.1-14
• /
• 2014

Rail-mounted cranes can be easily damaged by a sudden gust of wind while working at a running speed, due to the large mass and high barycenter positions. In current designs, working rail-mounted cranes mainly depend on wheel braking torques to resist large wind load. Regular brakes, however, cannot satisfactorily stop the crane, which induces safety issues of cranes and hence leads to frequent crane accidents, especially in sudden gusts of wind. Therefore, it is necessary and important to study the braking performance of working rail mounted cranes under wind load. In this study, a simplified mechanical model was built to simulate the working rail mounted gantry crane, and dynamic analysis of the model was carried out to deduce braking performance equations that reflect the qualitative relations among braking time, braking distance, wind load, and braking torque. It was shown that, under constant braking torque, there existed inflection points on the curves of braking time and distance versus windforce. Both the braking time and the distance increased sharply when wind load exceeded the inflection point value, referred to as the threshold windforce. The braking performance of a 300 ton shipbuilding gantry crane was modeled and analyzed using multibody dynamics software ADAMS. The simulation results were fitted by quadratic curves to show the changes of braking time and distance versus windforce under various mount of braking torques. The threshold windforce could be obtained theoretically by taking derivative of fitted curves. Based on the fitted functional relationship between threshold windforce and braking torque, theoretical basis are provided to ensure a safe and rational design for crane wind-resistant braking systems.

• Journal of Digital Convergence
• /
• v.19 no.4
• /
• pp.49-55
• /
• 2021

This study analyzed the relationship between the characteristics of learners and the achievement level according to the language they learn in programming education for non-major students. The learner's characteristics were set as mastery goal, situaltional interest, cognitive engagement, and self-efficacy for performance, and path analysis was conducted to understand the relationship between the language used and the learning achievement. Situaltional interest and cognitive engagement were found to have an effect on self-efficacy for performace, and self-efficacy for performance had an effect on academic achievement. At this time, the type of programming language to be studied showed a moderating effect on learning achievement. Based on the results of this study, it is suggested that appropriate instruction is needed for each language used in programming lessons for software non-majors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2C
• /
• pp.150-159
• /
• 2002

This paper presents the convergence time, SER(Symbol Error Rate), MSE(Mean Square Error), hardware complexity and step-size(${\mu}$) about various LMS(Least Mean Square) algorithms in FS-DFE(Fractionally Spaced-Decision Feedback Equalize) for Cable Modem based on MCNS(Multimedia Cable Network System) DOCSIS(Data Over Cable Service Interface Specification) v1.0/v1.1 standards. We designed and simulated using ${SPW}^{TM}$ and synthesized using STD90 library through ${SYNOPSYS}^{TM}$. And also, we adopted the time-multiplexed multiplication and tap shared architecture in order to achieve the low hardware complexity. Simulation results show that DS-LMS algorithms[1][3] is the optimum solution about performace and hardware size. in high order QAM applications. Finally, we achieved area saving about 58% using DS-LMS algorithm compare with conventional equalizer architecture.