• Title/Summary/Keyword: Perform the Work

Search Result 1,138, Processing Time 0.027 seconds

A Study on Effects of Air-delivery Rate upon Drying Rough Rice with Unheated Air. (벼의 자연통풍건조에 있어서 통풍량이 건조에 미치는 영향에 관한 연구)

  • 이상우;정창주
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.16 no.1
    • /
    • pp.3293-3301
    • /
    • 1974
  • An experimental work was conducted by using a laboratory-made model dryer to investigate the effect of the rate of natural forced-air on the drying rate of rough rice which was deposited in the deep-bed. The dryer consisted of 8 cylinderical containers with grain holding screen at their bottoms, each of which having 30cm in diameter and 15cm in height. The containers were sacked vertically with keeping them air-tight by using paper tape during dryer operation. Two separate layers of containers were operated in the same time to have two replications. The moisture contents of grains within each bins after predetermined period of dryer operation were determined indirectly by measuring the weight of the individual containers. The air-rates were maintained at 6 levels, or 5, 8, 10, 15, 18 and 20 millimenters of static head of water. The roomair conditions during dryer operation were maintained in the range of 10-l5$^{\circ}C$ in temperature and 40-60% in relative humidity. The results of the study are summarized as follows: 1. Drying characteristics of the grains in the bottom layers were approximately the same regardless of airdelivery rates, giving the average drying rate as about 0.35 percent per hour after 40-hour drying period, during which moisture content (w. b.) reduced from 24 percent to about 10 percent. 2. After about 40-hour drying period, the mean drying rates increased from 0.163 percent per hour to 0.263 percent per hour as air-flow rates increased from 5mm to 87.16mm of static head of water. In the same time, the moisture differences of grains between lower and upper layers varied from 12.7 percent at the air rate of 5mm of water head to 7.5 percent at the air-flow rate of 20mn of water head. Thus, the greater the air-flow rate was, the more overall improvement in drying performance was. Additionally, from the result of ineffectiveness of drying grain positioned at 70cm depth or above by the air rate of 5mm of static head of water it may be suggested in practical application that the height of grain deposit would be maintained adequately within the limits of air-rates that may be actually delivered. 3. Drying after layer-turning operation was continued for about 30 hours to test the effectiveness of reducing moisture differences in the thick layers. As a result of this layer-turning operation, moisture distribution through layers approached to narrow ranges, giving the moisture range as about 7 percent at air-flow rate of 5mm head of water, about 3 percent at 10mm head about 2 percent at 15mm head, and less than 1 percent at 20mm head. In addition, from the desirable results that drying rate was rapid in the lower layers and dully in the upper layers, layer-turning operation may be very effective in natural air drying with deep-layer grain deposit, especially when the forced air was kept in low rate. 4. Even though the high rate of air delivery is very desirable for deep-layer natural-air drying of rough rice, it can be happened that the required air delivery rate could not be attained because of limitation of power source available on farms. To give a guide line for the practical application, the power required to perform the drying with the specified air rate was analyzed for different sizes of drying bin and is given in Table (5). If a farmer selects a motor of which size is 1 or {{{{1 { 1} over {2 } }}}} H.P. and air-delivery rate which ranges from 8~10mm of head, the diameter of grain bin may be suggested to choose about 2.4m, also power tiller or other moderate size of prime motor may be recommended when the diameter of grain bin is about 5.0m or more for about 120cm grain deposit.

  • PDF

A Study on the Deok and Its Practice in Daesoon Thought: The Great Deok of Heaven and Earth of Kang Jeungsan (대순사상에 나타난 덕(德)과 그 실천수행 -강증산의 '천지대덕(天地大德)'과 관련하여-)

  • Joo, So-yeon;Ko, Nam-sik
    • Journal of the Daesoon Academy of Sciences
    • /
    • v.38
    • /
    • pp.1-46
    • /
    • 2021
  • Since ancient times, the word Deok (德, virtue) has been used as a term in ethics. In the east, it originally meant 'to acquire (得),' and during the warring states period, it was used to indicate 'personality' or 'value;' especially for political leaders. Then, in Confucianism, the word Deok developed into an ethical term suggesting that people should acquire Deok in their action so as to achieve human perfection. In Daesoon Thought, Deok originates from the Dao, and the two are close in the same manner that Yin and Yang are close and interrelated. The Dao of Daesoon Thought indicates the Great Dao of Heaven and Earth, which Gucheon Sangje had opened when he performed his Gongbu (holy work) at Daewonsa Temple, is such that the Great Deok was divided into the Deok of Heaven, the Deok of Earth, and the Deok of Humanity. This allows for the realization of Deok in each of the Three Realms. Jo Jeongsan, the successor of Gucheon Sangje, said that he will inherit the Great Deok originated from the Great Dao and enlighten the world to the Dao. The cause of the accumulation of grievances in the Three Realms was due to the failure to sufficiently spread Deok throughout the Three Realms. The Later World is where Deok will be offered in its full extent as it was secured by the Cheonjigongsa (Reordering Works of Heaven and Earth) performed by Gucheon Sangje. However, as the main agent of spreading Deok is the heart-mind, humans need to cultivate their heart-mind in the correct way. When humans finally become Dotong-gunja (beings who are perfectly unified with the Dao) and generously practice Deok in the world, there will be no grievances anywhere in the Three Realms. There are four ways of practicing Deok: Deok by caring for life, Eondeok (Deok of speech), Gongdeok (practicing meritorious Deok), and Podeok (spreading of Deok) to the world. Practicing the Deok by caring for life is to save and protect living beings based on the spirit of Jesaenguise (saving lives and curing the world). Eondeok is practiced when people speak to others in a positive way that fosters widespread goodness based on the spirit of Sangsaeng (mutual beneficence). When people perform Gongdeok they will be rewarded for their actions. Podeok can be realized when the followers of Sangje spread the Great Dao of Heaven and Earth based on the teachings of Daesoon Thought.

A Study on the Verification of an Indoor Test of a Portable Penetration Meter Using the Cone Penetration Test Method (자유낙하 콘관입시험법을 활용한 휴대용 다짐도 측정기의 실내시험을 통한 검증 연구)

  • Park, Geoun Hyun;Yang, An Seung
    • Journal of the Korean GEO-environmental Society
    • /
    • v.20 no.2
    • /
    • pp.41-48
    • /
    • 2019
  • Soil compaction is one of the most important activities in the area of civil works, including road construction, airport construction, port construction and backfilling construction of structures. Soil compaction, particularly in road construction, can be categorized into subgrade compaction and roadbed compaction, and is significant work that when done poorly can serve as a factor causing poor construction due to a lack of compaction. Currently, there are many different types of compaction tests, and the plate bearing test and the unit weight of soil test based on the sand cone method are commonly used to measure the degree of compaction, but many other methods are under development as it is difficult to secure economic efficiency. For the purpose of this research, a portable penetration meter called the Free-Fall Penetration Test (FFPT) was developed and manufactured. In this study, a homogeneous sample was obtained from the construction site and soil was classified through a sieve analysis test in order to perform grain size analysis and a specific gravity test for an indoor test. The principle of FFPT is that the penetration needle installed at the tip of an object put into free fall using gravity is used to measure the depth of penetration into the road surface after subgrade or roadbed compaction has been completed; the degree of compaction is obtained through the unit weight of soil test according to the sand cone method and the relationship between the degree of compaction and the depth of the penetration needle is verified. The maximum allowable grain size of soil is 2.36 mm. For $A_1$ compaction, a trend line was developed using the result of the test performed from a drop height of 10 cm, and coefficient of determination of the trend line was $R^2=0.8677$, while for $D_2$ compaction, coefficient of determination of the trend line was $R^2=0.9815$ when testing at a drop height of 20 cm. Free fall test was carried out with the drop height adjusted from 10 cm to 50 cm at increments of 10 cm. This study intends to compare and analyze the correlation between the degree of compaction obtained from the unit weight of soil test based on the sand cone method and the depth of penetration of the penetration needle obtained from the FFPT meter. As such, it is expected that a portable penetration tester will make it easy to test the degree of compaction at many construction sites, and will lead to a reduction in time, equipment, and manpower which are the disadvantages of the current degree of compaction test, ultimately contributing to accurate and simple measurements of the degree of compaction as well as greater economic feasibility.

A Study on the Guidelines on the Insertion of Metal Stiffeners in the Restoration of Stone Cultural Heritages (석조문화재 복원을 위한 금속보강재 매입방법 표준화 연구)

  • Lee, Dong-sik;Kim, Hyun-yong;Kim, Sa-dug;Hong, Seong-geol
    • Korean Journal of Heritage: History & Science
    • /
    • v.46 no.3
    • /
    • pp.212-228
    • /
    • 2013
  • Stone cultural heritages are repaired by the use of metal stiffeners. The problem is that this type of repair has been based on the experience of workers without specific guidelines and has caused various problems. This is to suggest the structural reinforcement and behavioral characteristics of metal rods to minimize the secondary damage of materials and have the specimens tested and verified to establish the guidelines on how to insert metal stiffeners. When only epoxy resin is applied to the cut surface, only 70% of the properties of the parent material are regenerated and it is required to structurally reinforce the metal stiffener for the remaining 30%. The metal rod is under the structural behavior after the brittle failure of stone material and the structural behavior does not occur when the metal stiffener is below 0.251%. When it accounts for over 0.5%, it achieves structural reinforcement, but causes secondary damage of parent materials. The appropriate ratio of metal stiffener for the stone material with the strength of $1,500kgf/cm^2$, therefore, should be between 0.283% and 0.377% of the cross section of attached surface to achieve reversible fracture and ductility behavior. In addition, it is more effective to position the stiffeners at close intervals to achieve the peak stress of metal rod against bending load and inserting the stiffener into the upper secions is not structurally supportive, but would rather cause damage of the parent material. Thus, most stiffeners should be inserted into the lower part and some into the central part to work as a stable tensile material under the load stress. The dispersion effect of metal rods was influenced by the area of reinforcing rods and unrelated to their diameter. However, it ensures stability under the load stress to increase the number of stiffeners considering the cross section adhered when working on large-scale structures. The development length is engineered based upon the diameter of stiffener using the following formula: $l_d=\frac{a_tf_y}{u{\Sigma}_0}$. Also, helically-threaded reinforcing rods should be used to perform the behaviors as a structural material.

A comparative study on perception of team teaching between vocational teachers and industry-educational adjunct teachers in Technical high school (팀티칭에 대한 공업계열 전문교과교사와 산학겸임교사 간 인식 비교 연구)

  • Son, Yeo-Ul;Lee, Byung-Wook
    • 대한공업교육학회지
    • /
    • v.36 no.1
    • /
    • pp.75-94
    • /
    • 2011
  • The purpose of this study is to suggest the basic data in order to examine and perform the plan for activating the team teaching between industry-educational adjunct teachers and vocational teachers in technical high school. The research results are as follows. First, It is found that both teacher groups acknowledge the necessity of the team teaching, but vocational teachers are less likely to recognize the necessity than industry-educational adjunct teachers. Second, In the preparation of team teaching, both two groups of the teachers believe that the preliminary interchange and training between them are to be highly supportive for the activities expected to help teachers. Therefore, it is necessary to have opportunity of communication and narrow the difference of opinions between them by promoting the deep interest about applicable field and sharing the mutual idea between the teachers in the preparation of team teaching. Third, And the two groups recognize that the cooperation and joint establishment of design of team teaching and the individual process or joint progress of class activity are desirable for the proper design of team teaching. Therefore, it is necessary to establish the class environment for the interaction between teachers and students through not only the reciprocal activities between teachers but the interest class by systematically preparing the class design and role division clearly. Fourth, In the practice of team teaching, the two groups believe that the teaching activities can be usually divided and progressed, but it is desirable to work together in the related contents. The vocational teachers recognize that it is necessary to actively interact with students by connecting with the case of industry field. On the other side, industry-educational adjunct teachers think that the learning contents should be selected and organized according to the interests of students by associating with the case of industry field. Fifth, And two groups of teachers recognize that it is desirable to evaluate the grade by reflecting on the assessment by vocational teachers(50%), industry-educational adjunct teachers(50%).

A Study on Smart Accuracy Control System based on Augmented Reality and Portable Measurement Device for Shipbuilding (조선소 블록 정도관리를 위한 경량화 측정 장비 및 증강현실 기반의 스마트 정도관리 시스템 개발)

  • Nam, Byeong-Wook;Lee, Kyung-Ho;Lee, Won-Hyuk;Lee, Jae-Duck;Hwang, Ho-Jin
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.32 no.1
    • /
    • pp.65-73
    • /
    • 2019
  • In order to increase the production efficiency of the ship and shorten the production cycle, it is important to evaluate the accuracy of the ship components efficiently during the drying cycle. The accuracy control of the block is important for shortening the ship process, reducing the cost, and improving the accuracy of the ship. Some systems have been developed and used mainly in large shipyards, but in some cases, they are measured and managed using conventional measuring instruments such as tape measure and beam, optical instruments as optical equipment, In order to perform accuracy control, these tools and equipment as well as equipment for recording measurement data and paper drawings for measuring the measurement position are inevitably combined. The measured results are managed by the accuracy control system through manual input or recording device. In this case, the measurement result is influenced by the work environment and the skill level of the worker. Also, in the measurement result management side, there are a human error about the lack of the measurement result creation, the lack of the management sheet management, And costs are lost in terms of efficiency due to consumption. The purpose of this study is to improve the working environment in the existing accuracy management process by using the augmented reality technology to visualize the measurement information on the actual block and to obtain the measurement information And a smart management system based on augmented reality that can effectively manage the accuracy management data through interworking with measurement equipment. We confirmed the applicability of the proposed system to the accuracy control through the prototype implementation.

The Development of Education Model for CA-RP(Cognitive Apprenticeship-Based Research Paper) to Improve the Research Capabilities for Majors Students of Radiological Technology (방사선 전공학생의 연구역량 증진을 위한 인지적 도제기반 논문작성 교육 모형 개발)

  • Park, Hoon-Hee;Chung, Hyun-Suk;Lee, Yun-Hee;Kim, Hyun-Soo;Kang, Byung-Sam;Son, Jin-Hyun;Min, Jung-Hwan;Lyu, Kwang-Yeul
    • Journal of radiological science and technology
    • /
    • v.36 no.2
    • /
    • pp.99-110
    • /
    • 2013
  • In the medical field, the necessity of education growth for the professional Radiation Technologists has been emphasized to become experts on radiation and the radiation field is important of the society. Also, in hospitals and companies, important on thesis is getting higher in order to active and cope with rapidly changing internal and external environment and a more in-depth expert training, the necessity of new teaching and learning model that can cope with changes in a more proactive has become. Thesis writing classes brought limits to the in-depth learning as to start a semester and rely on only specific programs besides, inevitable on passive participation. In addition, it does not have a variety opportunity to present, an actual opportunity that can be written and discussed does not provide much caused by instructor-led classes. As well as, it has had a direct impact on the quality of the thesis, furthermore, having the opportunity to participate in various conferences showed the limitations. In order to solve these problems, in this study, writing thesis has organized training operations as a consistent gradual deepening of learning, at the same time, the operational idea was proposed based on the connectivity integrated operating and effective training program & instructional tool for improving the ability to perform the written actual thesis. The development of teaching and learning model consisted of 4 system modeling, scaffolding, articulation, exploration. Depending on the nature of the course, consisting team following the personal interest and the topic allow for connection subject, based on this, promote research capacity through a step-by-step evaluation and feedback and, fundamentally strengthen problem-solving skills through the journal studies, help not only solving the real-time problem by taking wiki-space but also efficient use of time, increase the quality of the thesis by activating cooperation through mentoring, as a result, it was to promote a positive partnership with the academic. Support system in three stages planning subject, progress & writing, writing thesis & presentation and based on cognitive apprenticeship. The ongoing Coaching and Reflection of professor and expert was applied in order to maintain these activities smoothly. The results of this study will introduce actively, voluntarily and substantially join to learners, by doing so, culture the enhancement of creativity, originality and the ability to co-work and by enhance the expertise of based-knowledge, it is considered to be help to improve the comprehensive ability.

Study the impact on job satisfaction in the care facility of the empowerment of the members of the organization (요양시설의 조직구성원의 임파워먼트가 직무만족에 미치는 영향에 관한 연구)

  • Kim, Chang-Tae;Gwak, Gyeong-Ja
    • Management & Information Systems Review
    • /
    • v.31 no.4
    • /
    • pp.57-82
    • /
    • 2012
  • The purpose of the study is to suggest the measure for the improvement of job satisfaction and level of empowerment of sanatoriums' social workers by analyzing factors of empowerments' effect on the job satisfaction, and investigating level of empowerment and job satisfaction of social workers of sanatoriums for the elderly and the handicapped. The result of investigation and analysis on subjects of 420 social workers of sanatoriums for the elderly and the handicapped in Youngnam area for this is as follows: First, job characteristic that is empowerments' influence factor of sanatoriums' social workers is appeared in order of feedback, and function variety, and in organization characteristic is appeared in order of leadership, reward, and employee development. Second, level of empowerment that is recognized by sanatoriums' social workers is appeared a little higher than normal level and significance is appeared highest, and next are capability, self-determination ability, and influence. Third, features that showed significant difference with significance in general characteristic of sanatoriums' social workers were 'sex', 'marital status', and 'religion', and features that showed significant difference with capability were sex, age, marital status, academic background, and employment history. And features that showed significant difference with self-determination ability were sex, age, marital status, and employment history, and features that showed significant difference with influence were sex, age, employment history and types of facilities. Fourth, the whole average of job satisfaction of sanatoriums' social workers was 3.82 out of 5, which is generally high, features that showed significant difference statistically were age, marital status, academic background, employment history, and types of facilities. Thus, job satisfaction was appeared as high as 'more than age of thirty' in age, 'married' in marital status, 'under graduates of colleges' in academic background, and 'less than three years' in employment history. Fifth, as for factors that had influence on job satisfaction, the indirect effect with empowerment was appeared that had significant effect in organization characteristic, and had few effect in organization features. On these results, practical measures to increase job satisfaction of sanatoriums' social workers are as follows: First, political approach is required to standardize duty system(by various types of facilities and clients' characteristic) of social workers of sanatoriums for elderly and the handicapped, and help to do the role as professionals with giving better treatment and building self-respect by enough reward. Second, to suggest chances to perform the responsibility for the duty of the scenes by the regular supervision, establish regular supervision system of social workers of sanatoriums for the elderly and the handicapped, and the extension of duty to increase the functional varieties. Third, it is required to motivate to have self confidence for the work and to use potential ability with transforming leadership, and to have more chances of education for the self-development. To increase job satisfaction of sanatoriums' social workers who give direct services in sanatoriums for the elderly and the handicapped, more active and positive empowerment's level improvement is in need by improvement of empowerment for them.

  • PDF

A Study on Relationship between Physical Elements and Tennis/Golf Elbow

  • Choi, Jungmin;Park, Jungwoo;Kim, Hyunseung
    • Journal of the Ergonomics Society of Korea
    • /
    • v.36 no.3
    • /
    • pp.183-196
    • /
    • 2017
  • Objective: The purpose of this research was to assess the agreement between job physical risk factor analysis by ergonomists using ergonomic methods and physical examinations made by occupational physicians on the presence of musculoskeletal disorders of the upper extremities. Background: Ergonomics is the systematic application of principles concerned with the design of devices and working conditions for enhancing human capabilities and optimizing working and living conditions. Proper ergonomic design is necessary to prevent injuries and physical and emotional stress. The major types of ergonomic injuries and incidents are cumulative trauma disorders (CTDs), acute strains, sprains, and system failures. Minimization of use of excessive force and awkward postures can help to prevent such injuries Method: Initial data were collected as part of a larger study by the University of Utah Ergonomics and Safety program field data collection teams and medical data collection teams from the Rocky Mountain Center for Occupational and Environmental Health (RMCOEH). Subjects included 173 male and female workers, 83 at Beehive Clothing (a clothing plant), 74 at Autoliv (a plant making air bags for vehicles), and 16 at Deseret Meat (a meat-processing plant). Posture and effort levels were analyzed using a software program developed at the University of Utah (Utah Ergonomic Analysis Tool). The Ergonomic Epicondylitis Model (EEM) was developed to assess the risk of epicondylitis from observable job physical factors. The model considers five job risk factors: (1) intensity of exertion, (2) forearm rotation, (3) wrist posture, (4) elbow compression, and (5) speed of work. Qualitative ratings of these physical factors were determined during video analysis. Personal variables were also investigated to study their relationship with epicondylitis. Logistic regression models were used to determine the association between risk factors and symptoms of epicondyle pain. Results: Results of this study indicate that gender, smoking status, and BMI do have an effect on the risk of epicondylitis but there is not a statistically significant relationship between EEM and epicondylitis. Conclusion: This research studied the relationship between an Ergonomic Epicondylitis Model (EEM) and the occurrence of epicondylitis. The model was not predictive for epicondylitis. However, it is clear that epicondylitis was associated with some individual risk factors such as smoking status, gender, and BMI. Based on the results, future research may discover risk factors that seem to increase the risk of epicondylitis. Application: Although this research used a combination of questionnaire, ergonomic job analysis, and medical job analysis to specifically verify risk factors related to epicondylitis, there are limitations. This research did not have a very large sample size because only 173 subjects were available for this study. Also, it was conducted in only 3 facilities, a plant making air bags for vehicles, a meat-processing plant, and a clothing plant in Utah. If working conditions in other kinds of facilities are considered, results may improve. Therefore, future research should perform analysis with additional subjects in different kinds of facilities. Repetition and duration of a task were not considered as risk factors in this research. These two factors could be associated with epicondylitis so it could be important to include these factors in future research. Psychosocial data and workplace conditions (e.g., low temperature) were also noted during data collection, and could be used to further study the prevalence of epicondylitis. Univariate analysis methods could be used for each variable of EEM. This research was performed using multivariate analysis. Therefore, it was difficult to recognize the different effect of each variable. Basically, the difference between univariate and multivariate analysis is that univariate analysis deals with one predictor variable at a time, whereas multivariate analysis deals with multiple predictor variables combined in a predetermined manner. The univariate analysis could show how each variable is associated with epicondyle pain. This may allow more appropriate weighting factors to be determined and therefore improve the performance of the EEM.

Performing dramaturgy of director as a theatrical director : In terms of researching practice and documentation on the creative quadrilogy on Crime and Punishment ('연극의 작가'로서 연출가의 드라마투르그적 수행 - <죄와벌> 4부작 창작에 관한 '리서치적 실천'과 기록)

  • Kim, Weon Cuk
    • (The) Research of the performance art and culture
    • /
    • no.32
    • /
    • pp.549-594
    • /
    • 2016
  • This research focuses on 'dramaturgical' performance among all the acts of a director who constructs an artistic structure. This is, specifically, the dramaturgical acts that a director comes to perform in the process of dramatizing a novel. This paper aims to suggest a new kind of approach for productive interaction between drama theory and practice, not only by documenting the process of creation but also by moulding theoretical basis on acts of a director. As you all know, creative acts in practice so far have rarely been considered as subject and purpose of academic study. Even some lucky plays and directors had to settle for fragmentary review. That's mainly because Korean theatrical circles confine the way of recording the whole process of drama in practice only to a piecemeal review of performance. As a result, there have been very few cases of observing comtemporary plays under the historical background of drama. In this regard, this paper desires to raise a question, 'is productive interaction between drama theory and creative practice possible?' and to find the answer. If what is described in this paper can have worth beyond a mere record of creative acts, it may establish theoretical grounds on interpreting the play stage of this era by reading, in the contexts of drama history, a director's dramaturgical performing acts to dramatize a novel. The researcher of this paper, as a director of a theater troupe like a human and artistic community, adapted "Crime and Punishment" by Dostoevsky into four plays. They are , , , , and completed in 2009, 2011, 2012, and 2014, respectively as an independent theatric work having no connections to each other in story. Not only because the four plays share the same novel as its origin but also because an identical system is applied to dramatization of the novel, it gives an opportunity to focus on and perceive the role of the director. During the process of dramatiztion, the director, the researcher of this paper, carried all the duties, such as selecting a text, approaching the text theoretically and academically, adapting it for drama, picking out appropriate episodes. This paper defines all these acts as dramaturgical performing acts. In this sense, this paper can also be seen as a documentary of 'acts' performed during the process of dramatization.