• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.350-356
• /
• 2011

In this paper, we proposed the automatic cutting mechanism of the perforation pipes in an automobile muffler. This cutting mechanism makes continuous work possible, because it performs the batch work via the sequential operation of loading, feeding, cutting, and discharging. The proposed cutting mechanism consists of the frame unit, escape unit, turning unit, feeding unit, vision system, clamping unit, spindle/cutting unit and cooling unit. And, these mechanisms have been modularized through mechanical, dynamical and structural optimized design using the SMO (SimDesigner Motion) analysis module. Also, the virtual prototype was carried out using the 3-D CAD program. The cutting process cycle is performed in the order of loading, vision processing, feeding, clamping, cutting and discharging. And the cycle time for cutting one piece was designed to be completed in four seconds.

• 태양에너지
• /
• 제11권2호
• /
• pp.34-40
• /
• 1991

Thermal stratification enhancement for the higher extraction efficiency of hot water storage tank was experimentally studied with transparent fiber glass cylindical tank($350{\ell}$, D=516mm, H=1680mm). Height to diameter ratio (H/D =1,2,3), flow rate(Q= 8,10,12LPM), inlet-outlet temperature differences(${\Delta}T=20,25,30^{\circ}C$), and geometry of inlet-outlet port were the parameters. In particular, three kind of distributors were used for geometry of inlet-outlet port. As a result, it was possible to get extraction efficiency of 95% by using the distributor having variable diameter but keeping a constant diameter of perforation. So it is recommendable to design the distributor so that the main pipe decrease in diameter toward the dead end.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1367-1369
• /
• 2004

When an underground pipeline runs parallel with subway DC electrification system, it suffers from stray current corrosion caused by the stray current from the rails negative returns. Perforation due to the stray current corrosion may bring about disastrous accidents such even in cathodically protected systems. Traditionally, bonding methods such as direct drainage, polarized drainage and forced drainage have been used in order to mitigate the damage on pipelines. In particular, the forced drainage method is widely adopted in Busan. In this paper, we report the real-time measurement data of the pipe-to-soil potential variation in the presence and absence of the IR compensation. The drainage current variation was also measured using the Stray Current Logger developed. By analyzing them, the problems of current countermeasures for stray current corrosion are discussed.

• 물과 미래
• /
• 제19권2호
• /
• pp.131-138
• /
• 1986

단일유공벽의 수리학적 특성 및 동력학적 특성에 대해서 이론 및 실험적으로 연구하였다. 굴구의 이론식을 응용하여 연구한 바에 의하면 산란파항은 파력에 거의 영향을 주지 못함을 알 수 있고 실험에 의한 연구에 의하면 유공율의 변화에 따른 파력의 거동은 매우 민감한 것으로 나타났지만 구멍의 지름에 대한 벽두께의 비(l/D)는 좀 특이한 현상을 보인다. l/D의 값이 작은 범위에서는 유공벽의 구멍을 orifice라고 할 수 있으므로, 파력이 l/D의 변황에 거의 영향을 받지 않고, 이 때의 에너지 손실계수는 굴구의 식을 이용하면 1.0으로 나타난다. 그러나 l/D의 값이 큰 범위에서는 구멍내의 흐름을 관수로의 흐름이라고 볼 수 있으므로 파력이 l/D에 민감하고 이 때의 f는 1.5로 나타났다.