• Journal of Electrochemical Science and Technology
• /
• v.2 no.4
• /
• pp.198-203
• /
• 2011

A polymer electrolyte was prepared by using polyvinylidenefluoride-co-hexafluoropropylene (PVdF-HFP) or poly(ethylene glycol) dimethacrylate (PEGDMA) as polymer matrices, succinonitrile as an additive, and lithium perchlorate as a lithium salt. Compared to the polymer electrolyte employing PVdF-HFP, the PEGDMA-based polymer electrolyte exhibits substantially superior thermal stability when exposed to high temperatures. Nonetheless, the ionic conductivity of the PEGDMA-based polymer electrolyte was preserved in a wide temperature range between $-20^{\circ}C$ and $80^{\circ}C$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.57.2-57.2
• /
• 2009

퍼클로레이트 이온($ClO_4^-$)는 자연적으로 혹은 인공적으로 만들어지며 퍼클로릭산이나 암모늄 퍼클로레이트나, 포타슘 퍼클로레이트 혹은 소듐퍼클로레이트 염의 형태로 존재하며, 물에 아주 잘 녹고, 끓여도 제거되지 않으며, 활성 탄소와 같은 광물에도 흡착 되지 않는 성질로 인해, 기존 물리적인 정수 방법으로는 제거하기 어렵다. 또한 우리 몸에 흡수되면, 요오드가 갑상선에 흡수되는 작용을 방해하여 갑상선 기능장애를 초래한다. 이러한 퍼클로레이트 이온의 제거방법으로는 이온교환법이나 생물학적 방법 등이 개발되어져 있으나, 제거 시스템에 이동 및 안전한 농도까지 제거 등의 문제점으로 인한 퍼클로레이트 이온을 환원시키는 촉매 환원 반응에 의한 퍼클로레이트 이온 제거 기술 개발이 필요하다. 이런 촉매 환원에 필요한 수소 환원제를 발생시키기 위해서, 본 연구에서는 Carbon felt 위에 DC magnetron sputtering에 의한 thin film $TiO_2$과 regine을 이용한 powder $TiO_2$ 시편을 제작하였다. 이렇게 제작 된 $TiO_2$/Carbon felt의 미세구조 및 특성은 XRD, SEM, UV-vis-NIR 등을 통하여 분석하였다. UV 조사에 의해 $TiO_2$/Carbon felt 시편의 산소와 수소 발생과 DC bias의 걸어주었을 때 산소와 수소 발생 차이 등을 비교하였고, 이에 따른 퍼클로 레이트 이온의 분해 영향을 알아보았다.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.8
• /
• pp.627-634
• /
• 2009

This study was done to find out the formation mechanism of chlorate by electrochemical process using chloride ion ($Cl^-$) as an electrolyte. Firstly, the effective factors such as pH and initial chloride concentration were figured out to see the formation property of chlorate during electrolysis. And the relation of free chlorine, and mixed oxidants such as OH radical and ozone with chlorate were estimated to concretize the formation mechanism. As a result, it was found that the major reaction of chlorate formation would be electrochemical reaction with free chlorine, and also the direct oxidation of chloride ion and the reaction by OH radical were participated in the formation of chlorate. Moreover, it was observed that formed chlorate was oxidized to perchlorate. Lastly, the optimum condition was recommended by comparing free chlorine with chlorate concentration during the electrochemical process with the different electrode separation.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.2
• /
• pp.195-200
• /
• 1993

The neutral, reduced, and oxidized 2,2-trans isomers of $Rh_2(ap)_4$ (ap=2-anilinopyridinate) were investigated with respect to dioxygen binding in $CH_2Cl_2$ containing 0.1 M tetrabutyl-ammonium perchlorate. $Rh_2(ap)_4$ binds dioxygen in nonaqueous media and forms a $Rh^{II}Rh^{III}$ superoxide complex, $Rh_2(ap)_4(O_2)$. This neutral species was isolated and is characterized by UV-visible and IR spectroscopy, mass spectrometry and cyclic voltammetry. It can be reduced by one electron at $E_{1/2}$ = -0.45 V vs. SCE in $CH_2Cl_2$ and gives ${[Rh_2(ap)_4(O_2)]}^-$ as demonstrated by the ESR spectrum of a frozen solution taken after controlled potential reduction. The superoxide ion in ${[Rh_2(ap)_4(O_2)]}^-$ is axially bound to one of the two rhodium ions, both of which are in a +2 oxidation state. $Rh_2(ap)_4(O_2)$ can also be stepwise oxidized in two one-electron transfer steps at $E_{1/2}$ = 0.21 V and 0.85 V vs. SCE in $CH_2Cl_2$ and gives ${[Rh_2(ap)_4(O_2)]}^+$ followed by ${[Rh_2(ap)_4(O_2)]}^{2+}$. ESR spectra demonstrate that the singly oxidized complex is best described as ${[Rh^{II}Rh^{III}(ap)_4(O_2)]}^+$ where the odd electron is delocalized on both of the two rhodium ions and the axial ligand is molecular oxygen.

• Journal of the Korean Chemical Society
• /
• v.17 no.4
• /
• pp.256-261
• /
• 1973

Complex formation of magnesium-Eriochrome Black T at constant ionic strength and hydrogen ion concentration have been studied spectrophotometrically in acetonitrile solution. The measured pH values were calibrated with standard buffer solutions by using a glass electrode Ag/0.1M $AgNO_3$ reference electrode couple. The results are as follows;$E_{glass}=716+59.1\;logA_{H+}[mv]$+(in mv. vs. Ag reference electrode for picric acid $-10^{-3}M$ tetramethylammonium picrate buffer), and $E_{glass}=1,193+59.1\;logA_{H+}[mv]$(in mv. vs. Ag reference electrode for 1,3-diphenylguanidine $-3{\times}10^{-3}M $ 1,3-diphenylguanidine perchlorate buffer). The acid dissociation exponent of ligand, $ pK_{H,EBT-}$was found to be 9.1. The conditional formation constants of $MgEBT^{-}$complex by log-ratio method were 3.97 (when m = 2) and 5.02 (when m = 1) as $log K_n$, respectively, for the reaction of $H_mEBT^{(3-m)-} + Mg^{2+} {\leftrightarrow}MgEBT^{-} + mH^{+}$. The present study showed that$MgEBT^{-}$ has the composition of 1:1 which agrees with the result of Schwarzenbach et al. in aqueous solution.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.465-469
• /
• 2011

In this study, poly(ethyleneoxide) and poly(ethylene imine) polymer blends containing fumed silica fillers were studied in order to enhance the ion conductivity and interfacial properties. Lithium perchlorate ($LiClO_4$) as a salt, and silica($SiO_2$) as the inorganic filler were introduced into the polymer composite electrolyte composites and the composites were examined to evaluate their ionic conductivity for a possibility test of electrolyte application. As the diameter of semicircle in an impedance test became smaller, ionic conductivity of composite electrolytes had been enhanced by addition of 20 wt% silica filler. However, the conductivity was not greatly changed over 20 wt% content because the silica was sufficiently saturated in the polymer electrolytes. Diffraction peaks of PEO became weaker with the addition of inorganic fillers using XRD analysis. It showed that a crystallinity was proportionally reduced by increasing filler contents. The morphology of composite electrolyte films has been investigated by SEM. The heterogeneous morphology which silica was evenly dispersed by the strong adhesion of PEI was shown at higher contents of silica.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.1669-1678
• /
• 2011

Six new binuclear copper(II) complexes have been prepared by template condensation of the dialdehydes 1,8-[bis(3-formyl-2-hydroxy-5-methyl)benzyl]-l,4,8,11-tetraazacyclotetradecane (PC-a) and 1,8-[bis(3-formyl-2-hydroxy-5-bromo)benzyl]-l,4,8,11-tetraazacyclotetradecane (PC-b) with appropriate aliphatic diamines, and copper(II) perchlorate. The structural features of the complexes have been confirmed by elemental analysis, IR, UV-vis and mass spectra etc. The electrochemical behavior of all the copper(II) complexes show two irreversible one electron reduction process. The room temperature magnetic moment studies depict the presence of an antiferromagnetic interaction in the binuclear complexes. The catechol oxidation and hydrolysis of 4-nitrophenylphosphate were carried out by using the complexes as catalyst. The antimicrobial screening data show good results. The binding of the complexes to calf thymus DNA (CT DNA) has been investigated with absorption and emission spectroscopy. The complex [$Cu_2L^{1a}$] displays significant cleavage property of circular plasmid pBR322 DNA in to linear form. Spectral, electrochemical, magnetic and catalytic studies support the distortion of the copper ion geometry that arises as the macrocyclic ring size increases.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.822-827
• /
• 1999

The specific capacitance characteristics which were of the electric double layer capacitors(ELDC) made of phenol based activated carbon fiber(ACF) electrodes and organic electrolytes has been investigated with respect to different specific surface area of electrodes and different kinds of organic electrolytes. Throughout charge-discharge cell tests, it has been found that larger surface area and larger pore diameter of electrodes contribute to increase the specific capacitance. Binary mixture of organic solvent with propylene cabonate(PC) and tetrahydrofuran(THF) for 1 M-$LiClO_4$ electrolyte has a higher specific capacitance than single solvent of PC or mixed solvent with PC and diethyl cabonate(DEC). Also, even though 1 M-tetraethylamonium perchlorate(TEAPC) of organic electrolyte shows higher specific capacitance, it has longer charge time because of its lower ion mobility.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.675-682
• /
• 1995

Thin films of buckminsterfullerene($C_{60}$) formed by solution drop casting on Pt foil electrode surfaces were studied by cyclic voltammetry(CV) in acetonitrile(MeCN) containing quaternary ammonium or alkali-metal salts as supporting electrolyte. The electrochemical behaviors of $C_{60}$ films are found to be strongly dependent on the nature of the supporting electrolytes, especially with tetrabutyl ammonium perchlorate (TBAP, $NBu_4ClO_4$), and tetrabutyl ammonium tetrafluoroborate ($TBABF_4$, $NBu_4BF_4$). Reasonably stable films are formed into which electrons can be injected. The interaction of $C_{60}$ film with the quaternary ammonium cation may produce the fulleride salts $(TBA^+)(C{_{60}}^-)$ and $(TBA^+)_2(C{_{60}}^{2-})$. The bulk electroreduction with a controlled potential to generate the soluble $C{_{60}}^{3-}$ anions(dark red-brown color) is followed by electrooxidative deposition to produce a neutral $C_{60}$ film on the surface. The peak currents($I_{pc}$ and $I_{pa}$) of these thin film were dramatically decreased with repetitive potential scanning. These results could be explained by the adsorption-desorption phenomena and ion pairing interaction of reduced species($C{_{60}}^-$, and $C{_{60}}^{2-}$) onto the electrode surface. The peak current changes and peak potential shifts of the thin $C_{60}$ film in cyclic voltammograms formed from solution were observed by varying scan rates.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3173-3179
• /
• 2010

New complex $[Mn(II)H_{1.5}L]_2[Mn(II)H_3L]_2(ClO_4)_5{\cdot}3H_2O$ (1), where $H_3L$ is tris {2-(4-imidazolyl)methyliminoethyl} amine (imtren), has been prepared by reacting manganese(II) perchlorate hexahydrate with the imtren ligand in methanol. X-ray crystallographic study revealed that the imtren ligand hexadentately binds to Mn(II) ion through the three Schiff-base imine N atoms and three imidazole N atoms with a distorted octahedral geometry, and the apical tertiary amine N atom of the ligand pseudo-coordinates to Mn(II), forming overall a pseudo-seven coordination environment. The hydrogen-bonds between imidazole and imidazolate of $[Mn(II)H_{1.5}L]^{0.5+}$ complex ions are extended to build a 2D puckered network with trigonal voids. $[Mn(II)H_3L]^{2+}$ complex ions constitutes another extended 2D puckered layer without hydrogen bonds. Two layers are wedged each other to constitute overall stack of the crystal. Peroxidase activity of complex 1 was examined by observing the oxidation of 2,2'-azinobis(3-ethylbenzothiazoline)-6-sulfonic acid (ABTS) with hydrogen peroxide in the presence of complex 1. Generation of $ABTS^{+{\cdot}}$ was observed by UV-vis and EPR spectroscopies, indicating that the complex 1, a fully-coordinated mononuclear Mn(II) complex with nitrogen-only ligand, has a heme-independent peroxidase activity.