• 제목/요약/키워드: Percentage Relative Humidity

검색결과 63건 처리시간 0.02초

Changes in Sugar Contents and Storability of Yacon under Different Storage Conditions

  • Doo, Hong-Soo;Li, Hu-Lin;Kwon, Tae-Oh;Ryu, Jeom-Ho
    • 한국작물학회지
    • /
    • 제45권5호
    • /
    • pp.300-304
    • /
    • 2000
  • Tuberous roots of yacon (Polymnia sonchifolia Poeppig & Endlicher) were stored in different temperature and relative humidity conditions after curing for 30 days. Non-decadent percentage, moisture contents, brix degree and sugars were investigated. Whether temperature and relative humidity were high or not, most of the tuberous root decayed during storage, and the decayed percentage was increased as long as the storage period. In final, only 13% of tuberous roots remain intact at 4$^{\circ}C$, 85% relative humidity condition to be appeared best storage condition in this experiment and all of the tuberous root decayed in other storage conditions after 6 months. Moisture contents decreased a little in the high relative humidity. Even though tuberous roots decayed when stored at 1$0^{\circ}C$ and 2$0^{\circ}C$, most of brix degree reached about 17.0. Fructose, glucose and sucrose contents were 1.65, 1.15 and 0.35% at early storage period, and 1.6, 1.1 and 0.5% after 6 months at 4$^{\circ}C$, 85% relative humidity, respectively. In 3 temperature conditions, fructose and glucose increased for a month and then decreased successively afterwards, but sucrose increased gradually during 6 months. Also in 4 relative humidity conditions, fructose, glucose and sucrose contents were changed with similar to that of in temperature. Changes of fructose and glucose were the same except on 4$^{\circ}C$, 85% relative humidity, that was lower level than moisture of tuberous root.

  • PDF

한국산 잎담배의 역학적 특성 (Mechanical properties of Korea Tobacco)

  • 김기환;주영석
    • 한국연초학회지
    • /
    • 제5권2호
    • /
    • pp.63-69
    • /
    • 1983
  • The tensile strength (Pm) . elongation percentage ($\varepsilon$) , elastic modulus (I) , and specific volume (Sv) were calculated from the data of tensile characteristics of By 104 .and Burley 21 tobacco leaves, which were measured over a relative humidity from 60 to 80% at $20\pm2^{\circ}C$.The important results obtained were as follows.(1) Tensile strength(Pm) The "Pm"of By 104 was greater than that of Burley at. The "Pm"in both varieties were increased toward the upper stalk position and according to the decrease of relative humidity. The "Pm" of parallel piece to tile vein in a leaf were greater than that of right angle piece to the vein. (2) Elongation percentage ($\varepsilon$). The "s" of By 104 was higher than that of Burley 21. The "s" in both varieties were increased toward the upper stalk position and according to the increase of relative humidity. The "s" of parallel Piece to the vein in a Burley leaf was greater than that of right angle piece to the vein. (3) Elastic modulus (E) The "E" of Burley 21 leaf was higher than that of By 104. The "E" in both varieties were increased toward the lower stalk position and according to decrease of relative humidity. The "E"of parallel piece to the vein in both varieties leaves were greater than that of right angle piece to tile vein. (4) Specific volume (Sv) The "Sv" of Burley 21 leaf was increased than that of By 104. The "Sv" in both varieties were increased toward the lower stalk position and according to the decrease of relative humidity.ot;Sv" in both varieties were increased toward the lower stalk position and according to the decrease of relative humidity.dity.

  • PDF

Implications of High Temperature and Low Humidity on the Hatching in the Silkworm, Bombyx mori L. Under LD 12 : 12 Condition

  • Reddy P. Lakshminarayana;Naik S. Sankar;Reddy N. Sivarami
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제11권2호
    • /
    • pp.139-143
    • /
    • 2005
  • The implications of temperature (25, 30 and $35^{\circ}C$) and relative humidity (RH; 60, 70 and $80\%$) on the hatching rhythmicity and hatching parameters (percentage and duration) were studied in the silkworm, Bombyx mori L. under natural photoperiod (LD 12 : 12). Disease free layings (DFLs) of two pure silkworm breeds, Pure Mysore (PM, a multivoltine breed) and $NB_4D_2$ (a bivoltine breed), and their hybrid, $PM{\times}NB_4D_2$ were introduced into the experimental conditions on the $3^{rd}$ day of oviposition till completion of hatching. The hatching rhythm was predominantly diurnal under all temperature and humidity conditions, with peaks just after 'lights-on' phase (6 hrs). Extreme temperature and humidity conditions did not alter the hatching rhythmicity, but prolonged the hatching durations, extending it to the next day, coupled with reduced hatching percentage in PM and $PM{\times}NB_4D_2{\cdot}In\;NB_4D_2$, on the other hand, hatching did not extend to the next day. Hatching percentage in this breed, however, reduced below the economic level under high temperature and low humidity conditions. The high temperature and low humidity together, though did not alter the rhythmicity, seems to exert synergetic effect on the hatching percentage and its duration in the silkworm, B. mori.

농산물 포장용 골판지상자의 층적내구성의 분석과 향상에 관한 연구(I) -수분흡습특성과 압축강도열화- (Improvement and Analysis of Stacking Durability of Corrugated Fiberboard Boxes for Agricultural Products -Moisture Absorption Properties and Compressive Strength Reduction-)

  • 박종민;권순홍;권순구;김만수
    • Journal of Biosystems Engineering
    • /
    • 제19권4호
    • /
    • pp.358-368
    • /
    • 1994
  • Major factors in reducing the stacking strength of corrugated fiberboard boxes in cold storage or transport conditions are high relative humidity, causing elevated moisture absorption by the boxes. The bottom boxes in a stack will deform to the critical deflection causing agricultural products damage there, and eventually additional deflection will cause box collapse and finally toppling of the stack. The study was conducted to determine the water absorption characteristics and the compressive strength of the corrugated fiberboard boxes being widely used in packaging agricultural products in Korea. The sample boxes for the study were selected from the regular slotted containers (RSC) types, and one was the box used in apple packaging (Box A), another one was the box used in pear packaging (Box B). The corrugated shipping containers were made from a large portion of recycled fibers in Korea, and comparing with Box B, Box A was fabricated from fiberboard which contained more percentage of old corrugated containers (OCC) imported from foreign countries than domestic waste paper. The results obtained from the study were summarized as follows ; 1. Equilibrium moisture content (EMC) of the sample boxes was established after about 20 hours, and the EMC by absorption was lower than that by desorption. The EMC increased with the increasing of relative humidity and with the decreasing of temperature, and the rate of increasing was much higher above the relative humidity of 50%. 2. The maximum compressive strength of Box A was about 100 kgf greater than that of Box B on the same enviromental conditions. The strength of the sample boxes decreased rapidly with the increasing of relative humidity. The effect of relative humidity on the strength was a little higher than that of temperature. 3. As the applied load was progressively increased and a level was reached, the vertical side panels ($L{\times}D$) deflected laterally inwards or outwards. The panels deflected laterally inwards at higher relative humidity. 4. The maximum compressive deflection ratio and the critical deflection ratio of the sample boxes were increased linearly with the increasing of relative hunidity, but trends for its ratios showed inconsistant response to temperature.

  • PDF

$V_2O_5$를 도판트한 $TiO_2$의 미세구조와 감습에 미치는 알카리 옥사이드$ M_2O(M=Li,Na)$의 영향 (Effect of $Li_2O$ and $Na_2O$ addition on the microstructure and humidity sensitivity of $V_ 2O_5$-doped $TiO_2$)

  • 신용덕
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제9권6호
    • /
    • pp.605-615
    • /
    • 1996
  • In this paper, the effect of alkaline oxide addition such as Li$_{2}$O and Na$_{2}$O on the microstructure and humidity sensitivity of V$_{2}$O$_{5}$(2 mol%)-doped TiO$_{2}$(98 mol%) was investigated as a function of amount (0, 1, 2, 5, 10 mol%) of Li$_{2}$O and Na$_{2}$O additives. The pores in the alkaline free sample were distributed mostly in the range between 0.16 and 1.0.mu.m in diameter and its porosity was 23.29%. Li$_{2}$O caused grain overgrowth and reduced the porosity with a narrow distribution of the pore size, leading to poor humidity sensitivity. Na$_{2}$O helped to enlarge the distribution of the pore size through the formation of small soluble phases. The pore sizes of the sample containing Na$_{2}$O 2mol% were distributed mostly in the range between 1.0 and 2.5.mu.m in diameter and its porosity and intrusion volume of mercury were 31.13 % and 0.1155 mL/g respectively, which consequently improved the humidity sensing characteristics such as the sensitivity and temperature-stability. Especially, the addition of 2mol% of Na$_{2}$O improved the humidity-sensing characteristics such as sensitivity and linearity in the whole range between 30 and 90 %RH (Percentage Relative Humidity)y)

  • PDF

공압시스템 제습용 중공사막 모듈의 하우징 형태에 따른 제습효율 특성 연구 (A Study on Dehumidification Characteristics of Housing with Shape for Pneumatic System)

  • 정은아;이기윤;윤소남
    • 드라이브 ㆍ 컨트롤
    • /
    • 제16권2호
    • /
    • pp.66-71
    • /
    • 2019
  • In this study, flow analysis and dehumidification experiments were performed on hollow fiber membrane module to confirm the dehumidification characteristics for its different configurations. The CFD for the three different models was conducted using $30^{\circ}C$ temperature and 30%RH inlet humidity for quantitative analysis. Each model has different shape parameters i.e. the number of baffles. Comparison between flow analysis results and dehumidification experiment results revealed a percentage error of about 5%. The difference in relative humidity between the inlet and outlet for each model was calculated using flow analysis data. It was established that the difference in relative humidity of the inlet and outlet for the refined model with three baffles was highest among the three modeled modules of hollow fiber membrane module, i.e. around 9%.

Influence of Different Environmental Conditions on Cocoon Parameters and Their Effects on Reeling Performance of Bivoltine Hybrids of Silkworm, Bombyx mori. L.

  • Gowda B. Nanje;Reddy N. Mal
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제14권1호
    • /
    • pp.15-21
    • /
    • 2007
  • Three newly authorized bivoltine silkworm hybrids namely, $CSR2{\times}CSR4$ (productive single hybrid), $(CSR6{\times}CSR26){\times}(CSR2{\times}CSR27)$ (productive double hybrid) and $CSR18{\times}CSR19$ (robust single hybrid) were chosen for the present study. These hybrids were subjected to different temperature and humidity treatments i.e., $25{\pm}$1^{\circ}C and RH $65{\pm}5%$ (control), $30{\pm}1^{\circ}C$, with combinations of low relative humidity (RH $65{\pm}5%$) and high RH ($85{\pm}5%$) at different stages during rearing and spinning of silkworm larvae. The larvae of after 3rd moult were subjected to different thermal and humidity stress till the assessment of cocoon traits. The comparative rearing and reeling performance clearly indicated that the deleterious effect of high temperature and high RH was more pronounced for the majority of traits such as cocoon uniformity, cocoon weight, shell weight, shell percentage, reelability, filament length, raw silk percentage raw silk recovery denier and waste percentage on silk weight than other temperature and RH treatments and this effect was almost similar for all three silkworm hybrids studied. The present investigation clearly indicate that the deleterious effect of high temperature and high RH was more pronounced on rearing and spinning of silkworm larvae than other temperature and RH treatments and similar effect was noticed for all the three silkworm hybrids studied. The cocoon characters can be improved by providing ideal environmental conditions even during spinning stage of larvae affected with high temperature and RH. The study also suggest that high temperature and low humidity has greater effect during rearing stage than spinning stage.

고추 탄저병 Colletotrichum gloeosporioides의 병반 및 분생자층 형성에 미치는 온도, 상대습도 및 수분 지속기간의 영향 (Effect of Temperature, Relative Humidity, and Free Water Period on Lesion Development and Acervulus Formation of Colletotrichum gloeosporioides on Red Pepper)

  • 박경석;김충회
    • 한국식물병리학회지
    • /
    • 제10권1호
    • /
    • pp.34-38
    • /
    • 1994
  • Effect of temperature, relative humidity (RH) and free water period on anthracnose development by Colletotrichum gloeosporioides was examined on red pepper fruits. Mycelial growth of C. gloeosporioides was best at 28$^{\circ}C$, but greatly retarded at 32$^{\circ}C$. Minimum inoculum density required for lesion development varied with isolates, but was mostly above 1.0$\times$105 conidia/ml. Optimum temperature for lesion development on fruits was 31$^{\circ}C$. Percentage of lesion development was decreased as incubation temperature decreased. similar trend of temperature response was observed for acervulus formation on the developed lesions. Acervuli were not developed on the lesion as low as at 19$^{\circ}C$. Lesion development and acervuli formation tended to increase as increasing RH, but were greatly inhibited at the RH lower than 88%. More than 2 hours of free water period after inoculation were required for lesion development. Lesion development was increased as free water period increased. This study indicates that anthracnose development by C. gloeosporioides favors the conditions of high temperature above 28$^{\circ}C$, high humidity above 90% RH, and requires free water period longer than 2 hours.

  • PDF

Implications of Temperature and Humidity on Pupation Patterns in the Silkworm, Bombyx mori L.

  • Lakshminarayana, P.;Naik, S.Sankar;Reddy, N.Sivarami
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제5권1호
    • /
    • pp.67-71
    • /
    • 2002
  • The implications of temperature (25,30 and 35$^{\circ}C$) and relative humidity (60, 70 and 80%) on the pupation patterns were studied in the silkworm, Bombyx mori L. Larvae of two pure silkworm breeds, Pure Mysore (PM) and NB4D2 and their hybrid, PM ${\times}4 NB4D2 were reared under experimental conditions under natural day photoperiodic (LD 12: 12) condition. The three developmental marker events viz., larval ripening, pharate pupal formation and pupal formation occurred at or around the beginning of the photo-phase. The computed of mean vector (equation omitted), based on the circular statistics, also confirmed the above. However, the length of mean vector, r and the mean vector angular variance, s varied according to temperature and humidity conditions imposed; the variations being non-significant. Extreme temperature and humidity conditions, however, resulted in reduction in pupation rate (%) for PM and PM ${\times}4 NB4D2. On the other hand, in NB4D2 pupation percentage reduced below the economic level. The temperature and humidity together seems to exert synergic impact on the pupation rate at least in the silkworm Bombyx mori, L.

버어리종 잎담배 건조시 부패 방지 (Prevention of Barn Rot during Curing of Burley Tobacco I . Effect of Harvesting Time and Curing Condition)

  • 배성국
    • 한국작물학회지
    • /
    • 제34권3호
    • /
    • pp.235-238
    • /
    • 1989
  • 공시품종으로 Burley 21과 KB101을 수확한 후 건조상내에서 온도 처리와 습도 3처리를 조합하여 엽분별로 건조하였고, 수확시기에 엽중수분함량이 다른 잎을 우기에 비닐건조실 내에서 건조하여 부패엽발생정도를 조사하였던 바 그 결과는 다음과 같다. 1. 부패엽발생은 3$0^{\circ}C$에서 최대였고, $25^{\circ}C$에서 약간 감소하였으며, 35$^{\circ}C$에서는 현저히 감소하여 4$0^{\circ}C$에서는 100% RH 조건에서도 전혀 발생되지 않았다. 2. 습도 82%구에서는 부패엽이 10%정도로 아주 적었으나 이보다 고습조건일 수록 급속하게 증가되었다. 3. KB 101 육성계통이 Burley 21보다 부패엽 발생이 약간 적은 경향이었다. 4. 부패엽발생 부위는 주로 잎 엮은 부위에서 가장 많았고, 다음은 수확시 절단부위에서 않았다. 5. 엽분별로는 중엽에서 본엽에서 보다 부피엽발생율이 더 높았다. 6. 우기에 엽중수분함양이 높은 잎을 수확시는 부패엽발생이 않았고, 강우 4일 후의 수분상태 잎을 수확시는 거의 부패엽이 발생되지 않았다.

  • PDF