• 대한인간공학회지
• /
• 제25권2호
• /
• pp.11-22
• /
• 2006

The muscular-skeletal disorders(MSDs) that have become a major issue recently in Korean industrial safety area are mainly caused by manual material handling task. The objective of this study is to provide scientific data for the establishment of work safety standard for Korean workers through the experiments of lifting task under various conditions, in order to prevent the muscular-skeletal disorders in the industrial work site. Eight male college students were recruited as participants. Three different lifting frequencies(1, 3, 5 lifts/min) and three twisting angles(including the sagittal plane and two asymmetric angles; i.e., 0°, 45°, 90°) for symmetric and asymmetric tasks, respectively, with three lifting range from floor to knuckle height, knuckle to shoulder, floor to shoulder height for one hour's work shift using free style lifting technique were studied. The maximum acceptable weight of load(MAWL) was determined under the different task conditions, and the oxygen consumption, heart rate, and RPE were measured or recorded while subjects were lifting their MAWLs. The results showed that: (1) The MAWLs were significantly decreased as the task frequency and task angle increased.; (2) The heart rate, oxygen consumption, RPE significantly increased with an increase in lifting frequency although maximum acceptable weight of lift decreased.; (3) The highest heart rate and oxygen consumption was recorded at the lifting range of floor to shoulder, followed by floor to knuckle and knuckle to shoulder.; (4) The RPE value showed that subjects perceived more exertion at the high frequency rate of lifting task and lifting range of floor to shoulder height. (5) The modeling for MAWL using isometric strength, task angle and lifting frequency were developed. It is expected that use of the results provided in this study may prove helpful in reducing MMH hazards, especially from lifting tasks for Korean, and can be used as a basis for pre-employment screening.

• 한국농촌건축학회논문집
• /
• 제4권3호
• /
• pp.1-11
• /
• 2002

The aim of this research is to find-out the characteristics of Buddhist temples with relevant to Korean National cultural properties in Kum Kang(Kum-river) area. This analysis is accomplished by setting up the speciflc viewpoints where the charateristics can be perceived, and by measuring the form and angle from these points to the buddist culture ; 124 items were selected and analyzed by the comparative method. The most Important research finding is that both Traditonal Korean Temple and Kum Kang(Kum-river) Area site conceptualized and used a certain geometrical Feng-shui(geomancy) order in the disposition of mountain and river side according to the principles of human cognition. The conclusions are as follows ; Buddhist culture and the Characteristics of Buddhist temples in Kum Kang(Kum-river) Area having accumulated from the past and are the cultural complex and mixture of 7 elements. They also reflect cultural situations of each time period. The temples are a result of Korean traditional thought and spirit, as well as, regarding tradition as an important factor.

• Structural Engineering and Mechanics
• /
• 제61권2호
• /
• pp.255-266
• /
• 2017

In this study, self-supporting roofing elements especially convenient for large-span structures such as stadium, airport terminal, mall, coliseum, etc. were examined with respect to critical buckling load. These elements were assumed as laminated composite plates and, variation of free-edge forms, cutout types and lamination configurations were used as design parameters. Based on the architectural feature and structural requirements, the effects of curvilinear free-edge form on critical buckling load were focused on in this research. Within this scope, 14 types of lamination configuration were specified according to various orientation angle, number and thickness of plies with a constant value of total plate thickness. Besides that, 6 different types of cutout and 3 different free-edge forms were determined. By combining all these parameters 294 different critical buckling load analyses were performed by using ANSYS Mechanical software based on finite element method. Effects of those parameters on critical buckling load were evaluated referring to the obtained results. According to the results presented here, it may be concluded that lamination conditions have more significant influence on the critical buckling load values than the other parameters. On the other hand, it is perceived that curvilinear free-edge forms explicitly undergo changings depending on lamination conditions. For future work, existence of delamination might be considered and progression of the defect could be investigated by using non-linear analysis.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권8호
• /
• pp.412-417
• /
• 2000

TV ghost interference can be described as passive interference by the conducting part of transmission lines. In order to survey this interference from large-sized overhead EHV (extra high voltage) transmission line, TV reception quality was measured in the vicinity of that before and after construction. Instrumentation system was composed of ghost analyzer, TV received field intensity meter, VHF/UHF antennas, TV monitor and so on. The system is installed inside the vehicle. TV field intensity and PDUR (Perceived Desired wave to Undersired wave Ratio) are measured to evaluate TV ghost by using the system and vehicle. As the results, the useful data, which can be used to evaluate the effect of TV ghost interference from transmission lines could be obtained. In this paper, it is shown that the range of TV ghost interference from transmission lines can vary according to the frequency of TV electromagnetic wave, an incidence angle to the line and the other conditiions. At present, we are making efforts to establish a PDUR guideline for transmission lines.

• 펄프종이기술
• /
• 제34권2호
• /
• pp.73-83
• /
• 2002

Gloss is very important optical property influencing the perceived quality of the paper surface as well as the surface after printing. Although the average gloss level of paper products or printed images is important to meet end use specifications, the occurrence of gloss mottle, or non-uniformity of gloss, is often of greater concern for meeting quality requirements, especially for the high gloss paper. Gloss variation originates from the irregularities of paper surface, especially surface roughness of paper. Roughness of paper can be divided into micro-roughness (under $1\mu m$ scale in variation) and macro-roughness (over $1\mu m$ scale in variation) depending on the scale of the irregularities. A clearer understanding of the gloss variation of paper can be achieved by separating the contributions of these two scales of roughness, and characterizing them independently. In order to do this, a novel gloss measuring method was introduced. This can detect local gloss with very high resolution. The effect of macro-roughness on gloss variation, which was identified by the measurable surface topography, was separated from the total gloss variation by using this method. The effect of micro-roughness was then estimated indirectly. The local gloss variations of various paper samples were then evaluated to demonstrate the utility of this approach.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.9-14
• /
• 2012

The objectives of this study were to compare the results of HSL (Health and Safety Laboratory) ramp test with perceived sense of slip onto the several different floor surfaces under contaminated conditions. There are a variety of approaches from biomechanical measurements to psychophysical test and human perception. However, controversies over these approaches still remain. Some widely accepted methods need to be improved. AHP (Analytic Hierarchy Process) was used to evaluate the perception of slipperiness of seven different floor surfaces under the contaminated condition with glycerol solution. Twelve subjects worn same footwear and walked with self-selected step and cadence along the test floors. The angle of inclination obtained for water wet condition using 5 l/min with HSL ramp test was compared to perception of slipperiness. The surface roughness ($R_z$) related very well both AHP (r=0.95) and ramp test (r=0.92). The high significant correlation (r=0.90) was found between AHP and HSL ramp test.The HSL ramp test values (Coefficient of Friction, COF) according to subjective evaluation were divided into two categories. There were high correlations between test results (subjective evaluation, HSL ramp test) and surface roughness in Rz. Perception rating obtained with AHP showed a high correlation with COF obtained with HSL ramp test.

• 대한한의학원전학회지
• /
• 제20권3호
• /
• pp.1-8
• /
• 2007

In "Hwangjenaegyeong", pathogenesis is explained based on theory of Yin and Yang. According to the theory, all environments surrounding us, physical and emotional both, are related to outbreak of diseases. This also reflects one of the major theories in oriental medicine, in which a human body is perceived as a correspondence to natural environment. In this theory, the main idea is to understand changes in the universe based on mutual correlations from within. This kind of perspective is easily criticized from scientific point of view. Whereas modern science pursue analytic thinking and objective information, the theories above seem rather vague. However, from a different angle, through a characteristic perspective of oriental medicine, actual significance can be found in the theory. Many diseases result from one's intemperate living habits. Therefore, much prevention can be made by self-control. Also, once disease occurs, the essential step to treatment is to find cause in the living environment and regain balance. Natural cure will take its' course when living habits recover moderate pace and are back in harmony with the environment.

• 한국운동역학회지
• /
• 제31권2호
• /
• pp.79-86
• /
• 2021

Objective: The purpose of this study was to identify the effect of reduced plantar cutaneous sensation on gait kinematics during walking with and without CAI. Method: A total of 20 subjects involved in this study and ten healthy subjects and 10 CAI subjects participated underwent ice-immersion of the plantar aspect of the feet before walking test in this study. The gait kinematics were measured before and after ice-immersion. Results: We observed a before ice-immersion on plantar cutaneous sensation, CAI subject were found to reduced ankle dorsiflexion, knee external rotation, hip adduction, and internal rotation compared to control subject. After ice-immersion, CAI subjects were found to reduce knee external rotation, hip adduction. However, no significant ankle joint kinematics. Conclusion: While walking, gait pattern differences were perceived between groups with and without plantar cutaneous sensation. The results of the study may explain the abductions in the hip angle movements in CAI patients at initial contact compared to healthy subjects in the control group when plantar cutaneous sensation was reduced. A change in proximal joint kinematics may be a conservative strategy to promote normal gait patterns in CAI patients.

• 대한전자공학회논문지SP
• /
• 제44권4호통권316호
• /
• pp.60-69
• /
• 2007

인간 시각은 고휘도를 접할 경우 색 민감도가 떨어진다. 이러한 현상으로 인해, 인간이 고휘도와 일반 휘도를 가지는 두 디스플레이를 볼 때, 측정 상 동일한 색을 가지는 패치에 대해 두 색이 다르다고 인지하게 되고, 이를 색상이동 현상이라 한다. 본 논문에서는 고휘도와 일반휘도 디스플레이의 색상이동현상을 모델링하고, 두 디스플레이의 색이 인간시각에 동일하게 인지되도록 하는 색 보정 방법을 제안하였다. 색상이동모델은 색상 매칭 실험으로써 결정된다. 먼저 실험은 고휘도와 일반휘도 디스플레이의 3단계 밝기에서 비율을 일정하게 유지하여 수행한다. 실험에 쓰이는 패치는, CIELAB 색 공간에서 밝기와 채도를 고정하여 색상만 변화하는 패치를 사용한다. 실험에서 관찰자는 휘도차가 나는 두 패치를 동시에 보면서, 고휘도 디스플레이의 인지되는 색상이 일반 휘도의 디스플레이와 같을 때까지 색상 값만을 수정하고, 수정된 색상 값의 차이가 색상이동양으로 사용된다. 실험에서 얻어진 각 패치의 색상 이동양은 일곱 개의 구간으로 나뉘어 모델링 되어 색상이동모델로 사용된다. 고휘도 디스플레이의 색 보정은 픽셀단위로 수행되며, 먼저 입력 RGB 값을 CIELAB 값으로 변환 후, 색상 값만을 보정하기 위하여 LCh(lightness, chroma, hue)값으로 변환한다. 여기서, 색상 값만을 색상이동모델을 사용하여 수정한 후, 역 과정을 통하여 출력 RGB값을 추정한다. 평가를 위해 관찰자의 선호도 테스트를 하였고, 대부분의 관찰자는 고휘도 디스플레이에서 색상이동모델이 적용된 영상이 일반휘도를 가지는 디스플레이의 영상과 인지되는 색상이 유사하다고 판단하였다.울어진 분포를 보여주고 있어 응용분야에 따라 정확한 분석이 필요한 경우 이러한 펄스 모양을 고려한 방법이 필요하다. 본 연구에서는 이러한 펄스 모양을 처리하기 위한 새로운 방법론이 제시되어있다.는데 더 부합하는 것으로 평가할 수 있다. 높았고 외해역에서 다소 낮은 경향이었으며 지세포항 내에 위치한 정점은 '심각한 교란(heavily disturbed)'을 나타내기도 하였으나 연구 해역 전반적으로 '경미한 교란(slightly disturbed)'을 나타내고 있었다. 지세포항 인근 연안역의 저서생태계는 다소 불안정하거나 교란된 군집을 형성하고 있다고 볼 수 있으나 연구 해역 전반적으로는 계절적으로 큰 변동 없이 비교적 안정된 군집을 형성하고 있다고 보여진다.의 치료 방법으로서 관혈적 방법과 고식적 관절경적 수술보다 좋은 치료라고 판단된다.해는 30명 중 28명으로 완전관해율은 93%였다. 3년 국소제어율은 87%, 전체환자의 3년 생존율은 93%, 무병생존율은 87%였다. 4명(13%)에서 국소실패를 보였고 1명(3%)에서 원격전이를 보였다. 치료 중 급성 합병증으로 11명(37%)에서 RTOG grade 1-2의 장염을 보였으며 1명은 대장의 천공이 발생하여 수술로 치유되었다. 12명(40%)에서 RTOG grade 1-2의 급성 방광염을 보였다. 3명(10%)에서 RTOG grade 1-2의 백혈구 감소증이 보였으며 1명에서 심한 백혈구 감소증(RTOG grade 4)이 나타났으나 회복되어 치료를 완료하였다. 만성 합병증으로 5명(15%)에서 RTOG grade 1-2의 만성 장염을 보였으며 별다른 치료 없이 지내고 있으며 1명(3%)에서 R

• 방송공학회논문지
• /
• 제18권1호
• /
• pp.66-76
• /
• 2013

최근 다양한 환경에서 사용할 수 있는 3D 디스플레이가 활발하게 보급되었으나, 3D 컨텐츠의 보급은 그에 미치지 못하고 있다. 3D 콘텐츠의 확산을 저지하는 원인으로 주로 언급되는 것은 시각 피로이지만, 그에 못지않게 영상 왜곡의 영향 역시 크다. 신윤호, 이형철, 김신우 (2012)는 앞선 연구에서 단순한 자극에 대한 크기 지각 왜곡 효과를 측정하고 화면 시차와 크기 지각 사이에 선형적 관계가 존재함을 보고하였다. 본 연구에서는 이에 더하여 정사각형, 자유 선, 입방체 등 다양한 자극 특성이 자극 크기 지각에 미치는 영향을 크기 맞추기 과제를 사용하여 측정하였다. 그 결과 앞선 연구의 결과와 마찬가지로 화면 시차에 따라 지각된 크기가 선형적으로 변화하는 것을 확인하였으며, 이러한 선형성은 대상의 종류와 무관하게 일관되게 관찰되었다. 화면시차와 크기지각의 관계를 시각도(visual angle)에 의한 크기변화 예측함수로 제시하였다. 이 함수를 사용하면 영상제작에서 특정 화면시차의 자극이 시청자에게 어떤 크기로 지각될 지를 미리 예측할 수 있어 매우 유용할 것으로 기대한다.