• 제목/요약/키워드: Penetration water flow rate

검색결과 30건 처리시간 0.02초

Filtration-induced pressure evolution in permeation grouting

  • Zhou, Zilong;Zang, Haizhi;Wang, Shanyong;Cai, Xin;Du, Xueming
    • Structural Engineering and Mechanics
    • /
    • 제75권5호
    • /
    • pp.571-583
    • /
    • 2020
  • Permeation grouting is of great significance for consolidating geo-materials without disturbing the original geo-structure. To dip into the filtration-induced pressure increment that dominates the grout penetration in permeation grouting, nonlinear filtration coefficients embedded in a convection-filtration model were proposed, in which the volume of cement particles in grout and the deposited particles of skeleton were considered. An experiment was designed to determine the filtration coefficients and verify the model. The filtration coefficients deduced from experimental data were used in simulation, and the modelling results matched well with the experimental ones. The pressure drop revealed in experiments and captured in modelling demonstrated that the surge of inflow pressure lagged behind the stoppage of flow channels. In addition, both the consideration of the particles loss in liquid grout and the number of filtrated particles on pore walls presented an ideal trend in filtration rate, in which the filtration rate first rose rapidly and then reached to a steady plateau. Finally, this observed pressure drop was extended to the grouting design which alters the water to cement (W/C) ratio so as to alleviate the filtration effect. This study offers a novel insight into the filtration behaviour and has a practical meaning to extend penetration distance.

회수수를 사용한 3성분계 경량 골재 모르타르의 공학적 특성에 관한 실험적 연구 (An Experimental Study on the Engineering Characteristics of Ternary Lightweight aggregate Mortar Using Recycling Water)

  • 이재인;배성호;김지환;최세진
    • 한국건설순환자원학회논문집
    • /
    • 제10권1호
    • /
    • pp.48-55
    • /
    • 2022
  • 본 연구는 콘크리트의 운반 과정 중 발생하는 레미콘 회수수의 재활용율 증대 및 온실가스 저감을 위한 연구의 일환으로 회수수를 배합수 및 인공경량골재 프리웨팅수로 사용하고 고로슬래그 미분말 및 플라이애시를 시멘트 대체재로 사용한 3성분계 경량 골재 모르타르의 공학적 특성을 검토하였다. 이를 위해 3성분계 경량 골재 모르타르의 플로우, 기건단위질량, 압축강도, 건조수축, 중성화 깊이, 염화물 이온 침투 저항성을 측정하였으며 측정 결과 회수수를 사용할 경우 높아진 알칼리도에 의해 시멘트계 재료들의 반응성이 높아졌으며 3성분계 배합과 함께 사용할 경우 고로슬래그 미분말 15 %, 플라이애시를 5 % 사용할 시 모르타르의 압축강도 및 내구특성 향상에 긍정적인 것으로 나타났다.

수직 오리피스 이젝터의 혼합유동 및 산소전달 특성 (Mixed Flow and Oxygen Transfer Characteristics of Vertical Orifice Ejector)

  • 김동준;박상규;양희천
    • 대한기계학회논문집B
    • /
    • 제39권1호
    • /
    • pp.61-69
    • /
    • 2015
  • 본 논문은 수직 오리피스 이젝터의 혼합유동 및 산소전달 특성에 대한 실험적 연구를 목적으로 한다. 실험장치는 전동 모터-펌프, 오리피스 이젝터, 순환 수조, 공기압축기, 고속 카메라 시스템 그리고 제어 및 측정기기로 구성하였다. 측정된 구동유체 및 유입공기의 유량을 이용하여 유량비를 도출하였다. 이적터에서 분출된 혼합유동의 가시화를 통해 정성적 거동을 고찰하였으며, 용존산소 농도를 측정하여 총괄 산소전달계수를 도출하였다. 구동유체의 유량이 일정하고 압축기의 공기압이 높아지면 유량비와 산소전달계수는 증가하며, 압축기의 공기압이 일정하고 구동유체의 유량이 증가하면 유량비는 감소하지만 산소전달계수는 증가하였다. 기포의 크기에 따른 체류시간 및 확산도와 수직 혼합유동의 도달거리는 2 상의 접촉면적과 시간에 크게 영향을 미치기 때문에 산소전달율의 중요한 변수임을 유추할 수 있다.

분포형 FLO-2D 수문모형에서 초기토양함수가 유출결과에 미치는 영향 (Impacts of Initial Soil Moisture on Hydrologic Outflow in a Distributed FLO-2D Model)

  • 이길하
    • 한국환경과학회지
    • /
    • 제30권8호
    • /
    • pp.613-619
    • /
    • 2021
  • Soil water enters the atmosphere via evapotranspiration, where it transforms into atmospheric water vapor and plays important role in the surface-atmosphere energy exchange. Soil conditions have a direct influence on the effective rainfall, and initial soil moisture conditions are important for quantitatively evaluating the effective rainfall in a watershed. To examine the sensitivity of the initial saturation to hydrologic outflow, a two-dimensional distributed FLO-2D hydrologic model was applied to a small watershed. The initial saturation was set to 0.3, 0.5, and 0.7 and the obtained results were compared. The Green-ampt model was chosen to calculate the penetration loss. Depending on the initial soil moisture, the peak flow rate varied by up to 60%, and the total water volume in the watershed by approximately 40%.

원전 비상 노심냉각계통 배관 열성층화 현상 규명을 위한 실험적 연구 (Experimental Research for Identification of Thermal Stratification Phenomena in The Nuclear Powerplant Emergency Core Coolant System(ECCS).)

  • 송도인;최영돈;박민수
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집B
    • /
    • pp.735-740
    • /
    • 2001
  • In the nuclear power plant, emergency core coolant system(ECCS) is furnished at reactor coolant system(RCS) in order to cool down high temperature water in case of emergency. However, in this coolant system, it occurs thermal stratification phenomena in case that there is the mixing of cooling water and high temperature water due to valve leakage in ECCS. This thermal stratification phenomena raises excessive thermal stresses at pipe wall. Therefore, this phenomena causes the accident that reactor coolant flows in reactor containment in the nuclear power plant due to the deformation of pipe and thermal fatigue crack(TFC) at the pipe wall around the place that it exists. Hence, in order to fundamental identification of this phenomena, it requires the experimental research of modeling test in the pipe flow that occurs thermal stratification phenomena. So, this paper models RCS and ECCS pipe arrangement and analyzes the mechanism of thermal stratification phenomena by measuring of temperature in variance with leakage flow rate in ECCS modeled pipe and Reynold number in RCS modeled pipe. Besides, results of this experiment is compared with computational analysis which is done in advance.

  • PDF

A 30 MeV-cyclotron-based quasi-monoenergetic neutron source

  • Kuo-Yuan Chu ;Weng-Sheng Kuo;How-Ming Lee;Yiin-Kuen Fuh
    • Nuclear Engineering and Technology
    • /
    • 제55권5호
    • /
    • pp.1559-1566
    • /
    • 2023
  • This study developed a quasi-monoenergetic neutron source (QMN) for the semiconductor device's soft error rate test (SER). Quasi-monoenergetic neutrons are generated by 9Be(p, n)9B nuclear reaction with a 1 mm beryllium target and 30 MeV protons from a cyclotron. An 8 mm water in the back of the beryllium target is used for avoiding proton penetration. The neutron spectra simulated by MCNP showed that the peak energy was around 26.5 MeV. The heat flow and mechanical properties are numerically analyzed, and the safe operating conditions are therefore determined.

INVESTIGATION ON EFFECTS OF ENLARGED PIPE RUPTURE SIZE AND AIR PENETRATION TIMING IN REAL-SCALE EXPERIMENT OF SIPHON BREAKER

  • Kang, Soon Ho;Lee, Kwon-Yeong;Lee, Gi Cheol;Kim, Seong Hoon;Chi, Dae Young;Seo, Kyoungwoo;Yoon, Juhyeon;Kim, Moo Hwan;Park, Hyun Sun
    • Nuclear Engineering and Technology
    • /
    • 제46권6호
    • /
    • pp.817-824
    • /
    • 2014
  • To ensure the safety of research reactors, the water level must be maintained above the required height. When a pipe ruptures, the siphon phenomenon causes continuous loss of coolant until the hydraulic head is removed. To protect the reactor core from this kind of accident, a siphon breaker has been suggested as a passive safety device. This study mainly focused on two variables: the size of the pipe rupture and the timing of air entrainment. In this study, the size of the pipe rupture was increased to the guillotine break case. There was a region in which a larger pipe rupture did not need a larger siphon breaker, and the water flow rate was related to the size of the pipe rupture and affected the residual water quantity. The timing of air entrainment was predicted to influence residual water level. However, the residual water level was not affected by the timing of air entrainment. The experimental cases, which showed the characteristic of partical sweep-out mode in the separation of siphon breaking phenomenon [2], showed almost same trend of physical properties.

탄소섬유 배합비에 따른 전도성 그라우트 재료의 주입특성평가 (Injection Characteristics Evaluation of Conductive Grout Material According to Carbon Fiber Mixing Ratio)

  • 최효준;조완제;허형석;방태완;윤찬영
    • 한국지반환경공학회 논문집
    • /
    • 제24권1호
    • /
    • pp.15-23
    • /
    • 2023
  • 그라우팅 공법은 연약지반의 차수 및 보강을 목적으로 시공되는 공법이다. 그라우트가 지반 내에 주입될 때, 지반을 구성하는 지반의 형태, 토립자의 크기, 공극율 및 지하수의 유무에 따라 그라우트가 침투 및 확산하는 형태가 다양하게 나타나고 있으나, 그라우팅 설계 시에는 이러한 요인을 적용하기 어려운 실정이다. 따라서, 본 연구에서는 전도성 재료를 함유한 그라우트를 지반내로 주입하는데 있어서 전도성 재료 첨가에 따른 그라우트의 침투 성능을 파악하기 위하여 실내시험을 수행하였다. 주입시험에서는 전도성 재료를 혼합수의 0%, 3% 및 5%를 그라우트에 첨가하고, 원지반 조건을 자갈과 규사로 구성된 다양한 지반으로 조성하였다. 전도성 그라우트는 전용주입장치를 사용하여 모형지반 내로 압력에 의해 주입되면서 주입시간(t), 압력(p), 유속(v) 및 주입량(q)를 계측하고, 모형지반 내 주입된 경화체를 채취하여 침투성능을 평가하였다. 그라우트 주입실험 결과에서는 전도성 재료의 사용량과 그라우트 주입율은 역의 관계를 나타내었으며, 모형지반 토립자 크기에 따라 침투형태가 변화되는 것을 확인하였다. 전도성 재료를 함유한 그라우트는 지반 내 침투가 비교적 양호하고 경화체의 강도 및 내구성이 우수하여 그라우트의 침투범위 측정을 위한 첨가제로 사용하는 것이 가능하다고 판단하였다.

동결-융해작용이 흙의 제강도특성에 미치는 영향(I) (Effects of the Freeze/Thaw Process on the Strength Characteristics of Soils(1))

  • 유능환;박승법
    • 한국농공학회지
    • /
    • 제31권2호
    • /
    • pp.43-53
    • /
    • 1989
  • In this research programs, a series test was conducted to show the effects of freeze/thaw process on the various soil properties. The tests were carried out taken from the west sea shore of Korean peninsular and the west sea shore of Scotland, and their results are as follows; 1. There was a positive total heave in a freezing run, although water may he expelled for the sample initially. The water flow must he reverse' from expulsion to intake. 2. The confining pressure had an overriding influence on the heave and frost penetration, a sudden change of the axial strain at failure with strain rate was observed occuring at a strain rate between 10-5 and 10-6, and the initial friction angle of frozen clay was appeared zero. 3. There was shown a significant decrease in liquid limit of soil which was subjected to freeze/thaw process for the initial value of about 20% because of soil particles aggregation. 4. The cyclic freeze/thaw caused a sinificant reduction in shear strength and its thixotropic regain. The frozen/thawed soil exibited negative strength regain, particularly at high freeze/thaw cycles. 5. The freezing temperature greatly influenced on the failure strength of soils and this. Trend was more pronounced the lower the freezing temperature and shown the ductile failure with indistinct peaks.

  • PDF

Ro-Ro 구역용 미분무 소화설비의 개발을 위한 실험적 연구 (An experimental study on development of water mist fire-fighting systems for Ro-Ro spaces)

  • 곽지현;김영한
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제37권8호
    • /
    • pp.946-952
    • /
    • 2013
  • 선박의 Ro-Ro 구역이나 특별범주구역의 화재방호를 위해 설치하는 고정식 수계소화설비의 개발 및 실용화를 위해, 특히 방수량이 적으며 관련기준에서 요구하는 성능요건을 만족하는 미분무 노즐을 개발하고자 실물화재실험을 수행하였다. 본 설비의 화재시나리오는 크게 두 가지로 트럭화물화재와 승용차화재로 구분되며, 각각 고정 설치된 미분무 노즐과 화원과의 세 가지 위치에 대한 시나리오로 이루어져 있다. 모든 화재실험은 30분간 진행되었으며 천장부의 가스온도와 우드펠릿의 손상율, 타깃합판의 착화여부로 판단되었다. 본 논문은 두 가지 화재실험 중 조건이 더욱 까다로운 트럭화재용 미분무 노즐의 결과를 위주로 방수압력과 방수량, 미분무수의 유동특성에 따른 화재실험결과와 화재진압특성을 고찰하였으며, 수십 회의 반복실험 결과 분당 약 40 L의 유량을 가지는 저압 미분무 노즐로 Ro-Ro구역의 화재진압이 가능한 것으로 나타났다.