• 한국초지학회:학술대회논문집
• /
• 한국초지조사료학회 2003년도 제28회 정기총회, 제41회 학술발표회.심포지엄
• /
• pp.166.2-167
• /
• 2003

• 대한수의학회지
• /
• 제48권1호
• /
• pp.27-32
• /
• 2008

The present study was carried out to develop a sustained release implantable formula of bovine somatotropin (SRIF-BST) and to examine its sustained release effect. The SRIF-BST was produced by coating a solid pellet, which was comprised of BST and an excipient, made of a biodegradable polymer and poloxamer, which are capable of regulating the rate of BST release. The coated membrane of SRIFBST was observed with a field emission scanning electron microscope. The thickness of the coated membrane was approximately $1{\mu}m$, and the pore sizes of the coated membrane surface were below $10{\mu}m$. In dissolution test, the release duration of the SRIF-BST maintained for 10 days, whereas the release duration of the control BST formula maintained for 3 days. In weight gain assay and tibia test of hypophysectomized rats, the release duration of the SRIF-BST treated group was 12 days and the net weight gain was 53.16 g, also the tibia length and strength of the SRIF-BST treated group was increased 10.5% and 23.1% compared with those of the control group, respectively.

• Nuclear Engineering and Technology
• /
• 제27권6호
• /
• pp.811-824
• /
• 1995

CANDU 핵연료봉의 휨 열적 휨 멘트와 수력학적 견인력 및 기계적 하중에 기인하는 휨 모멘트에 의하여 일어난다. 여기서, 연료봉 휨은 연료봉 축방향 중심선으로부터의 측면 처짐으로 정의한다. 본 논문에서는 연료봉 축방향 중심선에 대한 비대칭 온도불포에 의해 핵연료 피복관 자체와 피복관과 소결체의 상호작용 부위에서 발생하는 열적 휨만을 취급한다. 이를 위해 1).소결체와 피복관사이의 기계적 상호작용을 무시한 조건에서의 핵연료 피복관의 휨과 2) 소결체와 피복관의 온도 변화에 기인하여 발생하는 소결체와 피복관 사이의 기계적 상호작용을 고려한 조건에서의 연료봉 휨을 혼합 고려하고, 각각에서 피복관의 비대칭 온도분포가 (i) 냉각재의 불완전한 혼합에 따른 비균질 냉각재 온도, (ii) 핵연료 피복관과 냉각재 사이의 비균질한 열전달 계수, (iii) 핵연료내 반경 방향으로의 중성자속 감쇄에 의한 비대칭 열 발생 등의 복합적효과에 의해 발생되는 것으로 고려하여 피복관의 대칭온도 분포까지 포함 할 수 있는 열적 휨의 일반적 해석 공식을 제시하였다. 본 휨 공식에 사용되는 모든 변수에 대한 민감도 분석을 통해, 핵연료봉 길이, 피복관 내경, 냉각재 평균 온도 및 변화 인자, 소결체 -피복관 기계적 상호 작용 인자, 중성자속 감쇄 인자, 핵연료 열팽창 계수, 피복관-냉각재 열전도 계수 등의 변화가 피복관 두께, 피복관-냉각재 열전달 계수, 피복관 열팽창 계수, 핵연료-피복관 열전달 계수 등의 변화보다 핵연료봉의 열적 휨에 상대적으로 더욱 영향을 미치는 것으로 밝혀졌다.

• Bulletin of the Korean Chemical Society
• /
• 제19권5호
• /
• pp.533-539
• /
• 1998

A magnetic film was deposited on a slide glass substrate from aqueous solutions of $FeCl_2$ and $NaNO_2$ at 363 K. XRD analysis showed that the film was polycrystalline magnetite $(Fe_{3(1-{\sigma})}O_4)$ without impurity phase. The lattice constant was 0.8390 nm. Mossbauer spectrum of the film could be deconvoluted by the following parameters: isomer shifts for tetrahedral $(T_d)$ and octahedral $(O_h)$ sites are 0.28 and 0.68 mm/s, respectively, and corresponding magnetic hyperfine fields are 490 and 458 kOe, respectively. The estimated chemical formula of the film by the peak intensity of Mossbauer spectrum was $Fe_{2.95}O_4$. Low temperature transition of the magnetite (Verwey transition) was not detected in resistivity measurement of the film. Properties of the film were discussed with those of pressed pellet and single crystal of synthetic magnetites. On the surface of the film, magnetite particles of about 0.2 μm in diameter were identified by noncontact atomic force microscopy (NAFM) and magnetic force microscopy (MFM).

• 한국식품과학회지
• /
• 제41권1호
• /
• pp.42-49
• /
• 2009

본 연구는 건조 배합사료를 공급한 양식 넙치와 생사료를 공급한 양식넙치의 품질특성을 비교해 보고자 하였다. 즉, 건조 배합사료로서는 시중에 판매되고 있는 상품사료(CEP)와 직접 설계 제조한 실험사료(FEP) 2종을 사용하였고 생사료(MP)를 대조구로하여, 약 10달간 각각의 사료를 공급한 넙치(1.15 kg)의 등근육 및 지느러미 살을 대상으로 하여 각 사료 공급에 의한 일반성분, 지방산, 아미노산, 관능평가 및 물성측정을 통한 어육의 품질차이를 비교하였다. 넙치 등근육의 일반성분의 각 함량은 차이가 없었으나, 지느러미 살의 경우는 MP 공급구가 수분함량이 높고 조지방 함량은 낮았다. 넙치 어육의 지방산 조성은, 넙치를 사육하는 동안 공급하는 사료의 종류에 따라 등근육 및 지느러미살의 지방산 조성은 차이가 있음을 알 수 있었고, 주로 축산육의 품질 측정시 지표로 사용되던 18 : 0/18 : 2, 18 : 2/18 : 3 및 n-6/n-3과 같은 지방산의 비율을 활용해서 어류의 풍미와 정미성을 비롯해 어육의 질감 차이까지도 예측할 수 있을 것으로 사료되었다. 또한, MP, CEP 및 FEP를 공급한 넙치 등근육의 구성아미노산 조성 중 EAA, FAA, SAAA, SAA 및 FRAA의 함량에는 차이가 없었으나, 지느러미살의 경우는 맛 관련 성분인 glutamic acid와 감미성분인 glycine 및 alanine이 각 사료구별로 유의적인 차이를 나타내었다. 냄새, 외관, 맛, 질감 및 종합적인 기호도면에 대해 관능검사를 실시한 결과 모든 사료구에서 유의적인 차이는 없었고, 경도(hardness)는 MP 공급구가 CEP 및 FEP 공급구보다 높았다. 물성측정 결과도 역시 모든 사료구에서 유의적인 차이는 없었다. 본 실험 결과로부터 건조 배합사료를 공급한 넙치의 등근육 및 지느러미 살의 품질 특성은 생사료를 공급한 넙치와 큰 차이는 없음을 알 수 있었다.

• Journal of Pharmaceutical Investigation
• /
• 제25권1호
• /
• pp.19-29
• /
• 1995

The study was carried out to develop useful formulation for omeprazole(OMP) through OMP-ethylendiamine complex(OMPED), and the pharmaceutical properties of formula were tested to find out the difference in vivo behaviors of formulations between the free and complexed OMP. Oral and suppository dosage forms were also formulated and the dissolution profiles and pharmacokinetic parameters were measured to observe the difference in bioavailability between the free and complex form, and the correlation between dissolution rate and bioavailability was evaluated. The results are summarized as follows; In the case of formulation for oral administration, the release of OMP from enteric OMPED pellets was found satisfactory to the requirement standard and no decomposition of OMP in the pellets was found in acidic solution. Therefore the enteric OMPED pellets are anticipated to be a stable formulation. The release of OMP from OMPED tablet with chitosan as excipient and coated with cellulose acetate phthalate was found to be significantly retarded. The results of bioavailability test for OMP and OMPED tablets with lactose-excipient showed that the AUC value of OMP tablet was $116.89\;{\mu}g\;{\cdot}\;min/ml$, that of OMPED tablet was $161.10\;{\mu}g\;{\cdot}\;min/ml$, respectively. The reason why was thought that OMP decomposes more readily in body than OMPED, and the AUC of the tablet with chitosan-excipient and coated with cellulose acetate phthalate was most enhanced. In the case of bioavailability for suppositories with OMP, $OMP-{\beta}\;-cyclodextrin$ complex and OMPED, the AUC of OMPED suppository was most increased. From the above results, it is thought that the more stable and bioavailable oral or rectal dosage forms could be developed by using the OMPED as a potential OMP complex.

• 한국임상수의학회지
• /
• 제18권4호
• /
• pp.324-328
• /
• 2001

This study was performed to evaluate the effects of $AS_2O_3$ upon antiangiogenesis in rat cornea, to examine it\`s possible application as an anticancer drug and to provide basic data for further studies of antiangiogenetic mechanism of $AS_2O_3$ . Angiogenesis was induced by cornea micropocket assay, as previously described. Sixteen of forty-eight eyes of Sprague-Dawley rats were randomly assigned to one of three groups, namely, only a bFGF group(control group), and a group treated by $AS_2O_3$ ($AS_2O_3$ group). After pellet implantation, we measured the number of new vessels, vessel length and clock hour of neovascularization, and area of neovascularization was determined using a mathematical formula. New vessels growing began at day 3, number of vessels in $AS_2O_3$ group were significantly more less than those in control group (p<0.05). The length of vessels of $AS_2O_3$ group was significantly shorter than that of control group after day 3(p<0.05). The clock hours of all group were slowly increased at all days but $AS_2O_3$ group was inhibited more than control group. Neovascularization areas of $AS_2O_3$ group were more significantly inhibited than those of control group (p<0.05). This study showed that $AS_2O_3$ had powerful antiangiogenetic effects and it would be useful in the choice of anticancer drug.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권1호
• /
• pp.52-60
• /
• 2010

This experiment was conducted on 60 Hanwoo calves comprising five feed additive groups, with 12 calves in each group, to determine the effects of additives at pre- and post-weaning on growth performance and blood profile. The groups were control, antibiotic (Neomycin 110 ppm), illite (2%), fermented green tea probiotics (FGTP, 0.5%), and mixed additives (FGTP 0.25%, illite 1% and licorice 0.1%). The calves were offered experimental pellet feeds ad libitum and after one month were supplied with imported timothy hay. They moved freely within the group and suckled their mother' milk during the pre-weaning stage (birth to 3 months) and were separated from their dam during the post-weaning stage (4-5 months). During the pre-weaning stage, the highest average daily gain (ADG) was recorded in the antibiotic- and mixed additive-fed groups followed by FGTP, control and illite groups. In the post-weaning stage, significantly higher total weight gain and ADG were recorded in both the FGTP and mixed additive groups compared to the other groups (p<0.05). Feed efficiency of mixed additive- and illite-fed calves were almost similar with antibiotic-fed calves compared to the other two groups, but the ADG was lowest in illite-fed calves during the pre-weaning stage. In contrast, post-weaning calves fed FGTP and mixed additives showed better feed efficiency. The values of hematological indices, differential leukocyte count, blood proteins and immunoglobulin among the additive-fed calves were not significantly different (p>0.05), although hemoglobin and hematocrit values were lower in FGTP compared to control, but similar in mixed additive and antibiotic groups. These results indicate no detrimental effects of feed additives on the blood profile of calves at both pre- and post-weaning age. Serum albumin in post-weaning calves of all feed additive groups were similar but significantly lower (p<0.05) than in the control group. Post-weaning, IgM was significantly lower (p<0.05) in illite-fed calves compared to other treatment groups, but there was no difference at pre-weaning. Considering all factors, the mixed feed additives and FGTP can be the replacement feed formula for antibiotic for Hanwoo beef calf production, especially when used post- weaning.

• 한국응용과학기술학회지
• /
• 제31권4호
• /
• pp.694-702
• /
• 2014

마이크론 크기를 가지는 ITO(indium tin oxide) 입자들은 인듐과 틴의 수용성 전구체들과 유기 첨가제를 분무 열분해하여 얻었다. 유기 첨가제로서는 에틸렌글리콜과 시트르산을 이용하였다. 분무 열분해 시 에틸렌글리콜과 시트르산과 같은 유기첨가제를 첨가하지 않고 얻어진 ITO 입자들은 구형이며 속이 꽉찬 형태를 가지는데 비해 유기 첨가제를 첨가하여 분무 열분해를 하면 얻어지는 ITO 입자들은 유기 첨가제의 양이 증가 할수록 껍질이 얇고 다공성이 증대된 중공 입자가 얻어진다. 유기첨가제를 첨가하지 않고 분무 열분해를 통해 얻어지는 마이크론 크기를 가지는 ITO는 $700^{\circ}C$에서 두 시간 동안의 후소성과 24 시간동안의 습식 볼밀링에 의해 나노 크기의 ITO로 전환되지 않으나, 유기첨가제를 첨가하고 분무 열분해를 통해 얻어지는 마이크론 크기를 가지는 ITO는 $700^{\circ}C$에서 두 시간 동안의 후소성과 24 시간 동안의 습식 볼밀링에 의해 나노 크기의 ITO로 쉽게 전환되었다. 응집된 나노 크기의 ITO의 일차 입자의 크기를 Debye-Scherrer 식에 의해 계산하였고 ITO 입자를 압축하여 만든 펠렛의 표면저항을 측정하였다.