• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.9
• /
• pp.777-785
• /
• 2000

This paper provides a guideline for the determination of compliance characteristics and the proper location of the compliance center in typical peg-in-hole and peg-out-hole tasks using hands. We first observe the fact that some of coupling stiffness elements cannot be planned arbitrarily. The given peg-in/out-hole tasks are classified into two contact styles. Then, we analyze concluded of the operational siffness matrix, which achieve the give peg-in/out-hole tasks effectively for each case. It is concluded that the location of the compliance center on the peg and the coupling stiffness element existing between the translational and the rotational direction play ompliance on the peg and the coupling siffness element existing between the translational and the rotational direction play important roles for successful peg-in/out-hole tasks. The analytic results verified through simulations.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.181-188
• /
• 2000

This paper deals with an analysis of the compliance characteristic for effective peg-in-hole task using robot hand without inter-finger coupling. We first observe the fact that some of coupling stiffness elements cannot be planned arbitrary. next we classify the task of inserting a peg-in-a-hole into two contact styles between the peg and the hole. Then we analyze the conditions of the specified stiffness matrix in the operational space to successfully and more effectively achieve the give peg-in-hole task for each case. It is concluded that the location of compliance center on the peg and the coupling stiffness element existing between the translational and the rotational direction play important roles for successful peg-in-hole task. Simulation results are included to verify the feasibility of the analytic results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.487-488
• /
• 2008

• The Journal of Korea Robotics Society
• /
• v.10 no.1
• /
• pp.42-51
• /
• 2015

Peg-in-hole assembly is the most representative task for a robot to perform under contact conditions. Various strategies for accomplishing the peg-in-hole task with a robot exist, but the existing strategies are not sufficiently practical to be used for various assembly tasks in a human environment because they require additional sensors or exclusive tools. In this paper, the peg-in-hole assembly experiment is performed with anthropomorphic hand arm robot without extra sensors or devices using "intuitive peg-in-hole strategy". From this work, the probability of applying the peg-in-hole strategy to a common assembly task is verified.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2315-2327
• /
• 1992

A robot assembly method which uses configuration and force/torque information of tactile sensor system and performs chamferless peg-in-hole tasks is suggested and experimentally studied. When the robot gripes the peg with random orientation, the realignment of the peg to the hole center line is successfully performed with the gripping configuration information of the tactile sensor and the inverse kinematics of the robot. The force/torque information of the tactile sensor makes it possible to control the contacting force between mating parts during hole search stage. The suggested algorithm employs a hybrid position/force control and the experiments show that the algorithm accomplishes well peg-in-hole tasks with permissible small contacting force. The chamferless peg-in-hole tasks with smaller clearance than the robot repeatibility can be excuted without any loss or deformation of mating parts. This study the possibility of precise and chamferless parts mating by robot and tactile sensor system.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.8
• /
• pp.570-578
• /
• 1988

In order for a robot to carry out a precise assembly task with compliant motion, a force/torque sensor is needed. The output of the cross-bar structured force / torque sensor which is used in a peg-in-hole insertion task and attached to a SCARA type robot, is analzed. First, the relationship between the sensor outputs and the force / torque components obtained by the outputs is investigated. Second, in a peg-in-hole insertion task, the sensor outputs changing with the contact position of the peg and the hole, are analyzed. Also, the relative position of the peg and the hole is obtained from the sensor outputs. The peg-in-hole insertion task is successfully executed, using a SCARA type robot with a wrist force / torque sensor manufactured in our laboratory and the compliance algorithm from the results of this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.731-736
• /
• 1989

RCC(Remote Center Compliance)[1][2] is a useful device for peg and hole insertion works. Two methods for smooth insertion of round peg and round hole are proposed. The idea of method 1 is to design the optimum position of the compliance center of RCC which is different from that of usual RCC in order to minimize the insertion force with the assumption of the known insertion angle. The idea of method 2 is to insert peg with rotation in order to decrease the friction coefficient between peg and hole. The two ideas are analyzed theoretically and are shown valid experimentally.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.80-88
• /
• 1994

In the automation of rigid parts mating process with the intelligent robots, Peg-In-Hole is the most available task since inserting is some analytic and needs suitable range of forces that can be controlled by induatrial manipulators. In this Peg-In-Hole process, it is very important to identify the contact state between tow parts, peg and hole, to build the strategies for robot motion that leads to avoid the jamming condition occurs during insertion process. In this paper, we adpopted 3 parameters for identification, lFzl, lFxy/Fzl, and lMxy/Fxyl, derived from axes value of Whitney's jamming diagram. Also, we defined the fuzzy membership functions for these parameters and developed the identification algorithm based on fuzzy inference method of max-product. As an experimental result, we obtained about 96% of identification ratio that could be raised up to industrial requirements by further research.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.8
• /
• pp.789-794
• /
• 2014

This paper presents some real performance of two typical bilateral teleoperation benchmark tasks: peg-in-hole and surface tracking tasks. The tasks are performed by an energy-bounding algorithm in the master control and position-based impedance algorithm in the slave control. Performance is analyzed for the position-force tracking capabilities from free space motion to surface contacting motion. In addition, preliminary user performance is evaluated by measuring the completion time and maximum/average contact forces. The quality of the measured performance is also compared with that of other existing approaches.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.103.4-103
• /
• 2001

This paper presents a scaled teleoperation scheme for 3-D microassembly on the experimental microassembly workcell. A workspace mapping between a master and a slave microrobot system is presented to teleoperatively control the microrobot system for microassembly such as peg-in-hole task. Based on this result, a scaling factor is designed and applied to the teleoperated micromanipulation for peg-in-hole task in a mesoscale. Using 3-D virtual simulator, the workspace of microrobot system, and the working path trajectory for microassembly is visually represented. The proposed method is validated through the execution of 3-D microassembly such as peg-in-hole task on the experimental microassembly workcell. The proposed method in the developed ...