• Journal of Conservation Science
• /
• v.24
• /
• pp.57-66
• /
• 2008

It is reported that excavated carbonized wooden objects tend to have more peeling and deformation stemming from the coexisting of different types of parts of objects. However, there is little research results on this. In this experiment, the sugar alcohol method was used and then compared with the results of the PEG4000 method which widely uses. This research targets: prediction of strength by weight increase, investigation of the dimensional stabilization effects by measuring the rate of shrinkage change, condition of drug penetration and change of wood texture by using a scanning electron microscope. As the results, the PEG4000 method needs a phased approach over 80% impregnation. On the other hand, the S A method remains steady from over 40% impregnation. The Deformation of carbonized wooden objects used in this experiment is considered as the phenomenon by shrinkage of non-carbonized parts. The PEG4000 method is verified the shrinkage in the samples treated with 20%, 40% and 60%; the S A method is verified the shrinkage in the samples treated with 20%.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.5
• /
• pp.147-151
• /
• 2009

For integrated passive device (IPD) applications, we have successfully developed and characterized metalinsulator-metal (MIM) capacitors with 2000 $\AA$ plasma-enhanced chemical vapor deposition (PECVD) silicon nitride which are deposited with the $SiH_4/NH_3$ gas mixing rate, working pressure, and RF power of PECVD at $250^{\circ}C$. Five PECVD process parameters are designed to lower the refractive index and lower the deposition rate of $Si_3N_4$ films for the high breakdown electric field. For the PECVD process condition of gas mixing rate (0.957), working pressure (0.9 Torr), and RF power (60 W), the atomic force microscopy (AFM) root mean square (RMS) value of about 2000 $\AA$ $Si_3N_4$ on the bottom metal is lowest at 0.862 nm and the breakdown electric field is highest at about 8.0 MV/cm with a capacitance density of 326.5 pF/$mm^2$. A pretreatment of metal electrodes is proposed, which can reduce the peeling of nitride in the harsh test environment of heat, pressure, and humidity.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.3
• /
• pp.267-272
• /
• 2017

Automotive seat covers with olefin film imported from foreign companies exhibit some problems such as low peeling strength and high burning rate. The traditional manufacturing process requires gas flame or direct heating for the laminating step. This paper introduces an alternative solution that replaces the olefin film and flame lamination method in making automotive seat covers or interior fabrics. We adopt a new manufacturing concept that applies a water-based resin coating to develop a coating system. The coating machine was successfully developed and tested. Results are intended to contribute to improving the quality and productivity of automotive seat cover production.

• Korean Journal of Optics and Photonics
• /
• v.27 no.6
• /
• pp.203-211
• /
• 2016

We have studied the hybrid method for reconstructing apodized chirped fiber Bragg gratings, using both an analytic estimation of grating parameters and an optimization algorithm. The Hilbert transform of the reflection spectrum was utilized to estimate grating parameters, and then the layer-peeling algorithm was used to obtain refined parameter values by the differential-evolution optimization process. Calculations for a fiber Bragg grating with wavelength chirp rate 2 nm/cm were obtained with an accuracy of $6{\times}10^{-5}nm/cm$ for the chirp rate and $3{\times}10^{-9}nm/cm$ for the index modulation, with much improved calculation speed and high reliability.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.3
• /
• pp.75-84
• /
• 2018

According to IHS, the overall display market is expected to grow at an average annual rate of 6% from $ 104 billion in 2016, to $ 138 billion in 2021. Among them, the OLED display panel will grow from $ 15 billion to $ 41 billion over the same period, forecasting a high annual growth rate of 22%. However, the refraction index, light leakage, bubble generation, adhesion deterioration, peeling phenomenon, moisture resistance, light transmittance, low turbidity. OCA (optically clear adhesive), which solves problems such as improving the resistance of the conductive film, is largely dependent on imported products. In addition, in 2016, the world market is worth KRW4.3 trillion, and the adhesive market has a large market effect. In this study, we tried to analyze the technical competitiveness of patent and thesis by classifying OCA (optically clear adhesive, optical adhesive) for display panel by curing method. As a result of the study, the amount of patents and papers in Korea was found to be superior to other competitors, but the quality level was low. In particular, it was found that the achievements of the papers in the hot melt field are lacking and the government should expand its support.

• Tribology and Lubricants
• /
• v.38 no.5
• /
• pp.222-226
• /
• 2022

Between diaphragms made of stainless steel (SUS), which is the main component of a hydrogen gas compressor, micro-slip occurs owing to repeated bending, resulting in scratches on the surface. The surface scratch of the compressor part is a problem with airtightness, which reduces the efficiency of the compressor; in severe cases, damage is a possibility. In this study, the changes in friction and wear characteristics due to the surface polishing of SUS and carbon-based solid lubricant films (graphene and CNT) were analyzed. Bare SUS, polished SUS, graphene film, and CNT film specimens were prepared. The surface roughness of the SUS was significantly reduced by surface polishing but increased by carbon-based solid lubricating films. In contrast, the friction coefficient maintained a similar value after surface polishing but was significantly reduced by the carbon-based solid lubricant films. In particular, the graphene film exhibited the lowest initial friction coefficient, while the CNT film exhibited the lowest overall average friction coefficient. Regarding the wear rate, polished SUS exhibited the lowest value, but the surface condition of the wear track showed that the carbon-based solid lubricating films were relatively less damaged. Although the wear rate measured was largely attributed to the solid lubricating film peeling off, the SUS surface under the film was considered protected.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.19-20
• /
• 2021

In order to reduce the emission of harmful substances that degrade indoor air quality, the Ministry of Environment strengthened the standards for the content of VOCs in paints to supply and sell eco-friendly paints. In this related study, an eco-friendly paint mixed with a powder-type absorbent material was prepared and its characteristics were reviewed. As the amount of powder-type absorbent material increased, the workability (viscosity, peeling, etc) decreased. Accordingly, this study aims to examine which particle size is suitable according to the particle size of the granular adsorbent while improving the problem of the powdery adsorbent by using the granular adsorbent. As an experimental plan, the particle size of granular activated clay is selected to be 0.250, 0.425, 0.710(mm), and the decrease rate of VOCs concentration and impact resistance are reviewed. As a result of the experiment, as the particle size of the granular activated clay increased, the decrease rate of the VOCs concentration increased and the impact resistance improved. Therefore, considering the problems that occur after actual painting, the particle size of granular activated clay of 0.425mm is suitable.

• Journal of Biosystems Engineering
• /
• v.26 no.3
• /
• pp.271-278
• /
• 2001

Many workers in the garlic peeling factory are separating the sound peeled garlics from the unpeeled and defective ones in a manual way. In order to reduce the seasonal labor requirement and operating cost, the mechanized garlic sorting system such as the vision-based garlic sorter should be developed. This study was conducted as one of basic studies on developing quality evaluation technique for peeled garlics, especially to developed the system for acquiring the whole surface images of garlics with a CCD camera. The following results were obtained from this study. 1. The belt-type garlic rotation system was devised to apply for the vision-based garlic sorter and was tested to decide the criteria of design and optimum conveying speed. 2. To evaluate the performance of the developed garlic rotation system, feeding rate and rotating rate were measured under the conditions of four experimental factors such as the inclined angle of rotating belt, the inclined angle of feeding belt, the height of plate arrays on feeding belt and the conveying speed of belts. And the capacity of the system according to mixture ratios of peeled garlics and unpeeled garlics was analyzed as a feasibility test. 3. For the inclined angle of rotating belt 20°and height of plate array on feeding belt 22㎜, the maximum rotating rate for garlic samples including unpeeled ones was 81.1% at the conveying speed of 4.2 garlic/sec. And under these condition, the maximum feeding rate was 85% at the inclined angle of feeding belt 6.5°. 4. The capacity of the developed garlic rotation system was almost constant regardless of mixture ratio of peeled garlics and unpeeled garlics and its range was 2.95∼3.92 garlic/sec. At the conveying speed of 4.2 garlic/sec, the capacity of the garlic rotation system was calculated ad 58∼64 kg/hr. 5. To improve performance of the garlic rotation system, it is recommended to develop a device to slide garlics into feeding belt.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.319-327
• /
• 1988

A new measuring method is proposed, which measures the atomization characteristics of a non-evaporating, axi-symmetric diesel spray by means of an image analysis of high speed shadow photographs. The instantaneous sauter mean diameter and the fuel concentration in the spray are calculated of the splay axis and in the radial direction and the data of the fuel injection rate, using an onion peeling model. Some examples of application of this method to eight different diesel sprays are demonstrated, and the results are compared to predicted results by the conventional immersion method and a quasi-steady one dimensional spray model.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.63-68
• /
• 2014

For a nanoscale Cu/low-k wafer, inter-layer dielectric (ILD) and metal layers peelings, cracks, chipping, and delamination are the most common dicing defects by traditional diamond blade saw process. Sidewall void in sawing street is one of the key factors to bring about cracks and chipping. The aim of this research is to evaluate laser grooving & mechanical sawing parameters to eliminate sidewall void and avoid top-side chipping as well as peeling. An ultra-fast pico-second (ps) laser is applied to groove/singulate the 28-nanometer node wafer with Cu/low-k dielectric. A series of comprehensive parametric study on the recipes of input laser power, repetition rate, grooving speed, defocus amount and street index has been conducted to improve the quality of dicing process. The effects of the laser kerf geometry, grooving edge quality and defects are evaluated by using scanning electron microscopy (SEM) and focused ion beam (FIB). Experimental results have shown that the laser grooving technique is capable to improve the quality and yield issues on Cu/low-k wafer dicing process.