• Food Science and Preservation
• /
• v.4 no.3
• /
• pp.259-264
• /
• 1997

To improve freshness of onion(Allium cepa), it was packed with various packaging films and stored at 5$^{\circ}C$ until 52 days. During the storage, internal gas composition, weight loss, spout ratio, decay ratio, surface color were determined. The used packaging films are two-perforated LDPE (control), LDPE, CPP/OPP/PE, Nylon/PE and Ag-zirconium filled LDPE. Onions were prepared by peeling or dipping in GFSE(grape fruit seed extract) and packed under vacuum or atmosphere with the selective films. Anaerobic condition was shown in the Nylon/PE package after 4 days and, thus weight loss, sprout ratio and color were considerably poor. All onions in the vacuum package after 15 days were spouted. Onions in CPP/OPP/PE and functional film(Ag-zirconium filled LDPE) package showed aerobic respiration until 52 days. Thus, the quality of onions in these packages was superior to the control.

• The Korean Journal of Ceramics
• /
• v.3 no.2
• /
• pp.105-109
• /
• 1997

The effects of surface conditions of the C-2 cemented carbide substrate on the adhesion of diamond film were investigated. The substrates were pretreated for different times with Murakami's reagent and then the acid solution of an H2SO4-H2O2. The adhesion strength was estimated by a peeling area around the Rockwell-A indentation. The cutting performance of the diamond-coated tools was evaluated by measuring flank wears in dry turning of Al-17% Si alloy. The morphology of deposited diamond crystallites was dominated by (111) and (220) surfaces with a cubooctahedral shape. The diamond film quality was hardly affected by the surface conditions of the substrate. The variation of tool life with longer substrate etching times resulted from a compromies between the increase of film adhesion at the interface and the decrease of toughness at the substrate surface. The coated tools were mainly deteriorated by chipping and flaking of the diamond film form a lock of adhesion strength, differently from the wear phenomena of PCD tools.

• Journal of Biosystems Engineering
• /
• v.24 no.5
• /
• pp.407-414
• /
• 1999

To evaluate the quality of flame-peeled chestnuts, their physical and chemical properties were analyzed. The physicochemical properties of flame-peeled chestnuts, including geometrical shape, texture and chemical composition, were compared to those of hand-peeled ones. For the flame-peeled chestnuts, some properties in heated and non-heated sections were separately analyzed. The color, texture such as springness, cohesiveness, adhesiveness, hardness and chewiness, moisture content, and reducing sugar of the heated section of the flame-peeled chestnuts were significantly different with their non-heated section. But the physicochemical properties of the non-heated section of the flame-peeled chestnuts were similar to those of the hand-peeled ones.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.597-601
• /
• 2008

Calculations for the dissolution behavior of liquid $CO_2$ droplets released in the East Sea and the Clipperton Clarion from a moving ship and a fixed pipeline have been carried out in order to estimate the $CO_2$ dissolution characteristics in the ocean. The results show that the injection of liquid $CO_2$ from a moving ship in a high temperature point is an effective method for dissolution. Also, it is noted that the ultimate plume generated from $CO_2$ bubbles repeatsand shrinking due to the peeling from a fixed pipeline, and the presence of hydrate layer on a liquid $CO_2$ droplet acts as a resistant layer in dissolving liquid $CO_2$.

• Journal of Welding and Joining
• /
• v.23 no.1
• /
• pp.61-68
• /
• 2005

An analytical method for determining the thermal stress distributions in a 3-layered beam is developed, which is focused on the end effects. This method gives the stress distributions which satisfy the stress-free boundary condition at the end completely. For verification of the method, a numerical example which was introduced by other researchers is treated. The stress distributions agree with the results of other researchers. The results show that the show and peeling stresses at the interfaces are significant near the edge and become negligible in the interior region.

• Proceedings of the KWS Conference
• /
• 1999.10a
• /
• pp.306-309
• /
• 1999

Based on the principle of complementary energy, an analytical method is developed which focused on the end effects for determining thermal stress distributions in the claded beam. This method gives the stress distributions which completely satisfy the stress-free boundary condition at the edge. Numerical result shows that shear stress and peeling stress at the interface between the substrate and clad are significant near the edge and become negligible in the interior region. Even though the relative location where the maximum or minimum stresses take place moves to interior as the length of the beam become smaller, the absolute location from the free end and the value of these stresses are the same in spite of the variation of the length of beam.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.303-308
• /
• 2003

김치는 우리나라 사람 누구나 즐겨 먹는 전통 음식이며, 세계적으로 널리 알려져 있는 우리 고유의 음식 중에 하나이다 우리나라에서 한해 생산되는 무는 1,759,357톤에 이르며(농림부, 2001), 한해 김치 생산량은 155만 톤으로 이중 김치가공공장 생산이 50만톤(33%)으로 그 비중이 매년 상승하는 추세이다. 또한 2001년 김치수출은 23,785톤으로 전년대비 1.5% 증가한 것으로 나타났다(김, 2002), 우리나라에서는 약 60여 개의 김치 가공공장에서 생산되는 알타리무김치의 비중은 약 8.5%로 이를 전체 무 생산량에 적용하면 알타리 김치는 한해 약 42,500톤이 생산되는 것으로 추정되며, 김치 가공을 대부분 인력에 의지하고 있다(민 등, 2001). (중략)

• Journal of environmental and Sanitary engineering
• /
• v.18 no.3 s.49
• /
• pp.21-26
• /
• 2003

The generation of waste cable has been continuously increased as a production of electrical and communication media are extended. The current recovery methods, such as mechanical peeling, incineration, solvent extraction and pyrolysis, seems inadequate because they are either hard to apply in some cases or environmentally unacceptable. It has been shown that copper can be effectively separated from the jelly filled type cables using a soybean oil treatment method. As a result, jelly compound is vanished from the wire by soybean oil bath and waste wires are separated copper and PE by the mechanical chipper. This is a more environmentally friendly method than burning, and considerably faster than Stripping.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1305_1306
• /
• 2009

Recently, piezoelectric transformer is applied to wide fields. Multi layer piezoelectric transformer has the advantage of high step up ratio, high electromechanical coupling coefficient(Kp) and high mechanical quality factor(Qm), however it shows the peeling-phenomenon of electrode, and high price due to high sintering temperature. Therefore this study focus on the method for fabrication of high power rosen type piezoelectric transformers.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.210-218
• /
• 1999

Sheet deposition type rapid prototyping system have many advantages : high build speed, low operating cost, large part size, no phase change, no need for support generation, and forth. However, those sheet deposition type rapid prototyping system require an additional post processing to remove excessive material attached to the part. This post processing is time consuming and labor intensive. Moreover, it is difficult for those system to fabricate parts with hollow cores and internal cavities. A new sheet deposition type rapid prototyping system that minimizes the post processing is proposed. The proposed system automatically removes excessive material in a peeling-off process between two cutting processes. In this way, the proposed system can reduce the post-processing time and cost as well as the limitation of the feasible geometric shapes in the conventional sheet deposition system.