• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.81-81
• /
• 2009

최근 휴대폰, 노트북 등과 같은 소형 멀티미디어 기기의 사용이 증가함에 따라 전자 패키징 산업은 경박단소화를 요구하고 있습니다. 더불어 전기적 신호의 손실을 줄이기 위해 전기, 전자산업체에서는 가볍고 굴곡성이 우수한 연성인쇄회로기판(Flexible Printed Circuit Board, FPCB)과 가격이 싸고 신뢰성이 입증된 경성인쇄회로기판(Rigid Printed Circuit Board, RPCB)의 전극간 접합에 많은 관심을 보이고 있습니다. 기존에 연성인쇄회로기판과 경성인쇄회로기판을 접합하는 방식으로는 connector를 이용한 체결법이 사용되고 있지만 완성품의 부피가 커지고 자동화 공정이 힘들며 I/O 개수가 제한적이어서 신호전달에 취약한 단점이 있습니다. 또한, 최근 FPCB를 RPCB에 접합하는데 interconnection으로 이방성 도전 필름(Anisotropic conductive film, ACF) 또는 비전도성 필름(Non-conductive film)이 널리 사용되고 있습니다. 하지만 필름의 가격이 비싸고, 낮은 전기 전도도를 보이며, 신뢰성 특성이 낮다는 단점을 가지고 있습니다. 본 실험에서는 기존의 connector 방식과 접착 필름을 이용한 방식을 대체하기 위하여 솔더를 interlayer로 이용하여 열과 압력으로 접합하는 방법에 대하여 연구하였습니다. 실험에 사용된 솔더의 조성은 Sn-3.0Ag-0.5Cu (in wt%)이고, RPCB와 FPCB의 표면처리는 ENIG로 하였습니다. 접합 온도와 접합 시간에 따라 최적의 접합 조건을 도출하고자 하였고, 접합된 시편을 가지고 신뢰성 테스트를 진행하였습니다. $85^{\circ}C$/85% 고온고습 시험과 고온 방치 시험을 통하여 접합부의 신뢰성을 테스트 하였고, 90도 Peel test로 기계적 접합 강도를 측정하였고, 파괴 단면을 Scanning Electron Microscopy (SEM), Energy-dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS)로 분석하였습니다.

• 대한기계학회논문집A
• /
• 제36권4호
• /
• pp.395-403
• /
• 2012

오늘날 접합시 열에 의한 재료 손상과 접착제(ACA, NCA) 이용으로 부품간의 정렬이 문제가 되고있다. 따라서, 본 논문은 FPCB 와 HPCB 금속(Au) PAD를 직접 접합하였다. 이때 박막인 재료에 손상을 입히는 열, 부품간의 정렬에 문제가 되는 접착제(ACA, NCA)를 사용하지 않고 상온에서 접합을 하였다. 접합시 초음파 혼을 이용하여 접합을 하였으며, 초음파혼은 40kHz이다. 공정 조건은 접합압력 0.60MPa, 접합시간 0.5, 1.0, 1.5, 2.0sec이다. 또한, 산업에서 요구하는 접합강도는 필강도 테스트 결과값으로 0.60Kgf 이상이며, 본 실험에서는 접합강도가 0.80MPa 이상이 나왔다. 이로서, 열에 의한 재료 손상과, 접 착제(ACA, NCA)에 의한 정렬 문제를 해결하였다. 그리고 산업산업에서 바로 적용하고 생산할 수 있는 FPCB, HPCB 시료 제작을 하였다.

• 공업화학
• /
• 제10권3호
• /
• pp.450-455
• /
• 1999

말레산 무수물 (MA)과 diethylene glycol (DEG)을 반응시켜 볼포화기가 도입된 에스테르형 디올 (UD)을 제조한 다음 이를 로진과 MA를 반응시켜 얻은 rosin maleic anhydride adduct (RMA) 또는 2-hydroxyethylmethacrylate (HEMA)가 도입된 RMA (RMA-HEMA)와 각각 반응시켜 rosin (UPMR) 및 RMA-HEMA 변성 불포화 폴리에스테르 (UPMRH)를 각각 제조하였다. 이를 가교제로 스티렌 또는 메틸메타아크릴레이트(MMA)로 가교시킨 후 내용매성과 인장강도 및 접착특성을 측정하였다. 가교제로 스티렌을 사용하는 경우가 MMA를 사용한 것에 비해 내용메성과 인장강도가 증가하였다. 또한 UPMRH의 경우가 UPMR에 비해 내용매성이 우수하였고 인장강도도 증가되었다. 한편 T-peel test로 측정한 계면접착력에 있어서 UPMR의 경우 가교제로 스티렌 및 MMA를 사용하는 경우는 1.61과 3.02 MPa인 반면 UPMRH의 경우는 2.32와 3.89 MPa로 HEMA가 도입됨에 따라 계면접착력이 증가되었다.

• 패션비즈니스
• /
• 제21권2호
• /
• pp.105-112
• /
• 2017

A string wallcovering is a kind of textile wallcovering which is made of cellulose fiber yarn laminated on base paper. Compared with normal paper or PVC wallpaper, a string wallcovering is preferred continually in the interior design market, as it is not only environmentally friendly but it also has less cost on mass production without the weaving process and has a natural visual effect, excellent functionality such as thermo keeping, permeability, sound absorption. However, in the dyeing process, it is not appropriate to use plenty of energy such as water, electricity, steam or chemicals considering the environmental trend and the government policy plenty of energy such as water, electricity, steam or chemicals. Currently, a string wallcovering is made of raw white yarn and padding with direct dye or pigment which includes toxic elements, especially the use of direct dye is restricted in a part of the developed country due to inclusion of azo. In this study, we researched dyeing based on cold pad batch dyeing of a string wallcovering with reactive dyestuff. The peel strength and bending depth test confirmed that the optimum adhesive type and spread amount improved the water resistance of the string wallcovering. Also, pad batch dyeing with optimum reactive dyestuff enhanced the color fastness to light and rubbing in dry and wet conditions. Additionally, for improvement of color fastness to rubbing in a wet condition, the additional treatment finishing without soaping process which is used water. The results of this study can be used as basic data for environmentally friendly and energy saving of the textile wallcovering.

• Journal of Applied Biological Chemistry
• /
• 제50권3호
• /
• pp.148-154
• /
• 2007

Volatile components of the essential oils of Satsuma mandarin (C. unshiu), Dangyuza (C. grandis), Yuza (C. junos), Byungkyul (C. playtymamma), Jinkyul (C. sunki), and Hakyul (C. natsudaidai) grown in Jeju Island were isolated from the fruit peels by hydro distillation and determined by GC-MS. GC-MS analysis identified 58 compounds, with main components being d-limonene $(64.01{\sim}79.34%),\;{\beta}-myrcene\;(3.01{\sim}26.53%),\;{\gamma}-terpinene\;(0.11{\sim}12.88%),\;{\beta}-pinene\;(0.78{\sim}4.74%),\;and\;{\alpha}-pinene\;(1.01{\sim}2.55%)$. Differences in compositions and contents of the essential oils were observed among citrus varieties. Effects of citrus oils on growth inhibitions of Escherchia coli, Staphyllococcus epidermidis, and Candida albicans were investigated using disc diffusion assay and minimal inhibitory concentration (MIC) assay. The essential oils inhibited growths of the test organisms, exhibiting higher levels of activity against Gram-positive S. epidermidis (MIC values $0.04{\sim}0.17mg/mL$), whereas Gram-negative E. coli was moderately resistant (MIC values $1.66{\sim}20.30mg/mL$). MIC of citrus essential oils ranged from $0.82{\sim}23.69mg/mL$ against C. albicans. The essential oils obtained from C. sunki, C. grandis, and C. playtymamma showed the highest antimicrobial activities against S. epidermidis and C. albicans, indicating their potential as natural antimicrobial agents.

• The Journal of Advanced Prosthodontics
• /
• 제4권3호
• /
• pp.121-126
• /
• 2012

PURPOSE. The aim of the study was to evaluate the effect of 3 silicone primers and 3 surface characterization of acrylic resin surface on bond strength between silicone elastomer and acrylic resin. MATERIALS AND METHODS. 96 Cosmesil silicones bonded to heat-curing acrylic resin were fabricated with the dimension of $75{\times}10{\times}3$ mm. The 3 primers used in this study were G611 platinum primer, A-330 Gold platinum primer, and cyanoacrylates resin. Specimens without primer were used as control. The 3 types of surface characterization done were retentive holes with 1.5 mm in diameter and 0.5 mm deep, retentive beads of 0.6 mm diameter and the third type which was plain without any characterization. The specimens were then checked for bond strength by subjecting them to $180^{\circ}$ peel test on a universal testing machine. The obtained results were then subjected to statistical analysis using 2-way ANOVA and Scheff$\acute{e}$ multiple post hoc procedures. The statistical significance was set at 5% level of significance. RESULTS. The maximum bond strength was seen for samples in which A-330G primer was used followed by G611 primer. The control group showed the minimum bond strength. Surface characterization of retentive holes increased the bond strength considerably as compared to retentive beads and samples without any surface characterization. CONCLUSION. Within the limitations of the study, A-330G primer was more compatible with Cosmesil M511 silicone and has better bonding of Cosmesil to acrylic resin. Retentive holes made on acrylic surface increased the bond strength considerably than those without any surface characterization.

• 동아시아식생활학회지
• /
• 제26권1호
• /
• pp.55-62
• /
• 2016

As interest in health has recently increased, many researchers have investigated the utilization of functional foods by confectioneries and bakeries. However, research on loaf bread containing beets has not been conducted. To investigate the optimal ratio of beet in loaf bread containing beet powder, characteristics of loaf bread according to 2%(B2), 4%(B4), and 6%(B6) beet powder per wheat flour were examined. The experimental results were as follows. Fermentation rate was reduced as content of beet powder increased compared with the control, whereas pH levels of dough and loaf bread significantly increased as content of beet powder increased. As content of beet powder increased, volume of loaf bread decreased, whereas specific volume increased. There was no significant difference in volume of loaf bread between the samples. As far as color changes are concerned, as content of beet powder increased, L value decreased, whereas a and b values increased with significant differences between the samples. Characteristics were examined by sensory evaluation of loaf bread containing beet powder. Color of inner texture and peel color of loaf bread significantly increased as content of beet powder increased. Size of air pores was largest in B4, and there was no significant difference in the uniformity of loaf bread between the control and experiment groups. As content of beet powder increased, rigidity of bread was reduced. Control showed the highest elasticity, whereas moisture level was highest in B2 with no significant differences between the samples. The flavor of beet was stronger as content of beet powder increased. In the preference test, B4 showed the highest preference scores for texture, flavor, taste, and overall likeness but not appearance. The experimental results showed that B4 among all control and experimental groups had the most suitable baking characteristics and an optimum content of beet powder. Therefore, B4 can be considered as the most appropriate for making loaf bread containing 4% beet powder in terms of physical and sensory characteristics. This is a new product that satisfies overall sensory preferences and has improved functionality.

• 한국태양에너지학회 논문집
• /
• 제38권1호
• /
• pp.45-55
• /
• 2018

Environmentally benign lead-free solder coated ribbon (e. g. SnCu, SnZn, SnBi${\cdots}$) has been intensively studied to interconnect cells without lead mixed ribbon (e. g. SnPb) in the crystalline silicon(c-Si) photovoltaic modules. However, high melting point (> $200^{\circ}C$) of non-lead based solder provokes increased thermo-mechanical stress during its soldering process, which causes early degradation of PV module with it. Hence, we proposed low-temperature conductive paste (CP) based tabbing method for lead-free ribbon. Modules, interconnected by the lead-free solder (SnCu) employing CP approach, exhibits similar output without increased resistivity losses at initial condition, in comparison with traditional high temperature soldering method. Moreover, 400 cycles (2,000 hour) of thermal cycle test reveals that the module integrated by CP approach withstands thermo-mechanical stress. Furthermore, this approach guarantees strong mechanical adhesion (peel strength of ~ 2 N) between cell and lead-free ribbons. Therefore, the CP based tabbing process for lead free ribbons enables to interconnect cells in c-Si PV module, without deteriorating its performance.

• 폴리머
• /
• 제33권6호
• /
• pp.525-529
• /
• 2009

우수한 성능의 2층 연성동박적층판(이하 FCCL)을 제조하기 위해서는 동박과 폴리이미드 사이에서 높은 접착력이 요구된다. 이를 위해 이종 재료로 인한 두 계면 사이의 접착력을 향상시키기 위해서는 일반적으로 기능성 실란커플링제가 사용된다. 본 연구에서는 압연동박과 폴리이미드 사이의 접착력 향상과 이미드화를 위한 고온의 열처리 조건에서도 안정한 새로운 형태의 실란커플링제를 합성하였다. 또한, 합성된 실란커플링제를 압연동박에 처리하였을 때, 표면처리제의 농도에 따른 표면변화를 관찰하였으며, 이로 인해 발생되는 접착력 변화를 확인하기 위해서 2층 FCCL을 제조하여 $90^{\circ}$ peel test를 통해 관찰하였다. 그리고, 두 종류의 폴리이미드를 이용한 FCCL에서 실란 커플링제가 접착력에 미치는 영향을 확인하였다.

• 접착 및 계면
• /
• 제13권1호
• /
• pp.9-16
• /
• 2012

접착용 테이프 박리거동에 미치는 외부효과를 알아보고, 이를 설명하는 준강체 실린더 체인(semi-rigid body cylinder chain) 모델을 제안하였다. 먼저 평면으로부터 테이프를 떼어낼 때, 테이프의 거동을 정성적으로 파악하고, 이를 토대로 준강체 실린더 체인 모형을 도식화하였다. 그 다음 테이프를 떼어내는 힘에 미치는 여러 요소들(온도, 표면거칠기, 떼어내는 속도, 각도 의존성, 테이프 폭 등)의 효과와 이들의 민감도를 분석하여 동일한 실험 기준조건을 설정하고, 이 조건에서 평면으로부터 테이프를 떼어내는 힘(벡터)의 각도 의존성을 $10^{\circ}$ 간격으로 측정하였다. 실험결과는 본 연구에서 확립한 모형이론과 실험오차범위 내에서 잘 일치하였고, 다른 요소들의 효과는 현상론적 입장에서 정성적으로 잘 설명되었다. 이러한 이유로, 본 결과는 PSA 테이프의 접착력을 시험 평가하는 모델로 활용될 수 있을 것으로 기대된다.