• Journal of Chest Surgery
• /
• v.1 no.1
• /
• pp.19-24
• /
• 1968

A clinical investigation was reported on 17 cases of spontaneous pneumothorax requiring surgical mana-gement. Males outnumbered females 15:2. Determination of the etiology in this series showed that the majority were pulmonary tuberculosis and paragonimiasis. Several others had pneumonia, lung abscess, cyst and blebs. It is of particular interest that the acute inflammation of respiratory system was younger age group, pulmonary tuberculosis & paragonimiasis were between 2 nd and 3 rd decades, and lung abscess, cyst, blebs were above 4 th decade. Pulmonary tuberculosis was far advanced bilateral and active. The ratio of right to left side was 13:6 and both side involved in 2 cases. In about half cases of patients, above 50%-collapsed lung associated with mediastinal shifting developed. The complications were pleural effusion and bronchopleural fistula. The former was 13 cases [76.4%] in which 3 cases combined with mixed infection, and latter was 5 cases. As the management, 11 cases were subjected to intercostal or rib resection drainage with continuous suc-tion. Among 11 drainage cases, 8 cases were successful in acute stage and 3 cases failed in chronic stage. This faiure was due to interference with re-expansion of collapsed lung for peel formation and broncho-pleural fistula. The open thoractomy was applied in 9 cases, among which primary operation were 5 cases and drainage failure were 4 cases. Among 11 cases subjected to the open thoracotomy, wedged resection was performed in 3 cases including paragonimiatic cyst, and pneumonectomy in 1 case-tuberculosis, and decortication only was performed in 2 cases in paragonimiasis. Decortication & lung resection was carried out in 2 patients among which ruptured lung abscess 1 case and ruptured multiple blebs 1 case. There was no case of death but prognosis of the tuberculosis may be poor because of far advanced bilateral and active pulmonary tuberculosis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.60-60
• /
• 2000

The adhesion interface formation between copper and poly(ethylene terephthalate)(PET), poly(methyl methacrylate)(PMMA) and Polyimide films was treated using Ion assisted reaction system to sequential sputter deposition by High-Frequency ion source. The ion beam modification system used a new type of low power HF ion thruster for space application as new low thruster electric propulsion system. Low power HF ion thruster with diameter 100mm gives the opportunity to obtain beams of Ar+ with currents 20~150 mA (current density 0.5~3.5 mA/cm2) and energy 200~2500eV at HF power level 10~150 W. Using Ar as a working gas it is possible to obtain thrust within 3~8 mN. Contact angles for untreated films were over 95$^{\circ}$ and 80 for Pet, 10o for PMMA and 12o for PI samples as a condition of ion assisted reaction at the ion dose of 10$\times$1016 ions/cm2, the ion beam potential of 1.2 keV and 4 ml/min for environmental gas flow rate. 900o peel tests yielded values of 15 to 35 for PET, 18 to 40 and 12 to 36 g/min. respectively. High resolution X-ray photoelectron spectrocopy is the Cls region for Cu metal on these polymer substrates showed increases in C=O-O groups for polymide, whereas PET and PMMA treated samples showed only C=O groups with increase the ion dose. Finally, unstable polymer surface can be changed from hydrophobic to hydrophilic formation such as C-O and C=O that were confirmed by the XPS analysis, conclusionally, the ion assisted reaction is very effective tools to attach reactive ion species to form functional groups on C-C bond chains of PET, PMMA and PI.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.32-45
• /
• 2016

Fruit bagging has been widely practiced in peach cultivation to produce high quality and unblemished fruit. Moreover, fruit bagging has been utilized to study the effect of shading on the quality of fruit. We conducted a proteomic analysis on peach fruit to elucidate the biochemical and physiological events that characterize the effect of bagging treatment. Comparative analysis of 2D electrophoresis (2-DE) gels showed that relative protein levels differed significantly at 125 DAFB (days after full bloom), as well as at 133 DAFB in fruit that had been bagged until 125 DAFB, followed by exposure to sunlight. Most of the proteins with altered expression were identified by MALDI TOF/TOF. Twenty-one proteins with differential expression among the groups were identified at 125 DAFB, while thirty proteins with differential expression among the groups were identified at 133 DAFB. The analysis revealed that expression of proteins involved in photosynthesis, stress responses, and biochemical processes influencing metabolism were altered during bagging treatment, suggesting that regulation of the synthesis of carbohydrates, amino acids, and proteins influenced fruit size, solid/acid ratio, and peel color. This work provides the first characterization of proteomic changes in peach in response to fruit bagging treatment. Identifying and tracking protein changes may allow us to better understand the mechanisms underlying the effects of bagging treatment.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.29-33
• /
• 2012

Solution type pressure sensitive acrylic adhesives were synthesized from 2-ethylhexyl acrylate (2-EHA) as a base monomer and acrylic acid as a functional monomer. The surface energy and basic physical properties of synthesized PSA (pressure sensitive adhesives) were investigated as a function of contents of acrylic acid and crosslinking agent. The structures of adhesive were identified by FTIR. Viscosities and molecular weights of PSA were measured by a Brookfield viscometer and GPC, respectively. Consequently, molecular weight and viscosity increased as the contents of acrylic acid increased up to 6 wt% and then decreased at higher contents. Surface energy increased as the contents of acrylic acid increased owing to the increase of COOH groups, which yielded the enhancement of polarity of PSA. On the other hands, their peel strengths were inversely proportional to molecular weight and showed tendencies of decreasing as the contents of acrylic acid and crosslinking agent increased.

• Food Engineering Progress
• /
• v.14 no.1
• /
• pp.27-34
• /
• 2010

Multilayer edible coatings was applied to lemon with beeswax-hydroxypropyl methylcellulose (BW-HPMC), soybean oil-carboxymethyl cellulose (SBO-CMC), and carnaubawax-shellac-locust bean gum (CW-SL-LBG), respectively. The multilayer was composed of two layers of the same material, but the outer layer only contained vitamins C and E as antioxidants. Coating amounts built on lemon peel were measured to be large in the order of CW-SLLBG> BW-HPMC> SBO-CMC. The coated lemons were stored at 30${^{\circ}C}$ for 12 days. CW-SL-LBG showed the least change during the storage in weight loss, rotten rate, firmness, and browning. Whereas SBO-CMC had the least change in pH, soluble solid amount, and titratable acidity. In a sensory test, CW-SL-LBG was evaluated to be the best in the attributes such as spoilage, glossiness, color, firmness, and flavor. Overall CW-SL-LBG was judged to be the best for multilayerd coating with vitamin C and E on lemon.

• Journal of Adhesion and Interface
• /
• v.1 no.1
• /
• pp.38-46
• /
• 2000

A novel diamine monomer, containing fluorine and phosphine oxide, bis(3-aminophenyl) 3,5-bis(trifluoromethyl) phenyl phosphine oxide (mDA6FPPO), was prepared via Grignard reaction, and utilized to prepare polyimides with dianhydrides such as PMDA, 6FDA, BTDA or ODPA, by the conventional two-step route; preparation of poly(amic acid), followed by solution imidization. The polyimides were characterized by FT-lR, NMR, DSC and DMA, with intrinsic viscosity, and adhesive properties were also evaluated. A phosphine oxide containing monomer, bis(3-aminophenyl) phenyl phosphine oxide (mDAPPO) a nd a commercial 3,3'-diamino diphenyl sulfone (mDDS) were also used for comparison. The polyimides with mDA6FPPO exhibited high $T_g$, excellent solubility, and good adhesive properties.

• Journal of Adhesion and Interface
• /
• v.8 no.4
• /
• pp.1-7
• /
• 2007

Waterborne polyurethane (WPU) which is environment friendly has been rapidly used in coating and adhesive industries. However, the WPU is deficient in chemical resistance, thermal resistance, and mechanical property compared to solvent-based polyurethane. In this study, the WPU was synthesized from two types of polyester polyols, 4,4-dicyclohexylmethane diisocyanate ($H_{12}MDI$), dimethylolpropionic acid (DMPA), triethylamine (TEA) and ethylenediamine (EDA), organophilic nanoclay. The thermal stability, mechanical property of the WPU nanocomposite dispersion increased with increasing clay concentration. Especially, their peel strength showed their maximum value at 3 wt% of organophilic nanoclay contents.

• Journal of Adhesion and Interface
• /
• v.8 no.4
• /
• pp.23-31
• /
• 2007

An atmospheric plasma pre-treatment method was applied to EVA foam, Leather (Action), Rubber and Unwoven to improve its contact angle and adhesion using atmospheric plate type reactor. In order to investigate the optimum reaction condition of plasma treatment, type of reaction gas (nitrogen), rate of gas flow (30~100 mL/min), and reaction time (0~30 sec) were examined in a plate plasma reactor. The result of the surface modification with respect to the treatment procedure was characterized by using SEM. Due to a decrease of the contact angle of various materials, the greatest adhesion strength was achieved at optimum condition such as flow rate of 100 mL/min, reaction time of 10 second for an atmosphere nitrogen gas. Consequently, the atmospheric plasma treatment reduced the contact angle of the EVA foam, Leather (Action) and Rubber also resulted in the improvement of the adhesion.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.433-439
• /
• 2008

An atmospheric plasma pre-treatment method was applied to polyurethane foam (density: 0.27) and rubber (butadiene rubber) to improve its contact angle and adhesion using atmospheric plate type reactor. In order to investigate the optimum reaction condition of plasma treatment, type of treatment gas (nitrogen, argon, oxygen, air), rate of gas flow ($30{\sim}100\;mL/min$), and treated time ($0{\sim}30\;s$) were examined in a plate plasma reactor. The result of the surface modification with respect to the treatment procedure was characterized by using SEM and ATR-FTIR. Due to a decrease of the contact angle of various materials, the greatest adhesion strength was achieved at optimum condition such as flow rate of 100 mL/min, reaction time of polyurethane foam 10 s and rubber 3 s for an atmosphere nitrogen gas. Consequently, the atmospheric plasma treatment reduced the wettability of the polyurethane foam and rubber also resulted in the improvement of the adhesion.

• Food Science and Preservation
• /
• v.24 no.3
• /
• pp.381-386
• /
• 2017

Ergocalciferol is known as having vitamin D activity. In this study, the effects of UV irradiation on the increase of egocalciferol content were investigated in 7 kinds of mushrooms, i.e, lily mushroom (Flammulina velutipes), oyster mushroom (Pleurotus ostreatus), young oyster mushroom (Pleurotus ostreatus), king oyster mushroom (Pleurotus eryngii), button mushroom (Agaricus bisporus), shiitake (Lentinula edodes), and wood ear mushroom (Auricularia auricula-judae). Mushrooms which were not exposed to UV light contained negligible amount of ergocalciferol in all kinds of tested mushrooms, but UV irradiation increased their content of ergocalciferol. Of UV A, B and C, UV B light was the most effective to increase ergocalciferol contents. In mushrooms, the increase in ergocalciferol content occurred only in the peel within 1 mm depth from the surface, which was directly exposed to the UV light. Therefore, when fresh whole mushrooms were irradiated with UV light, lily mushroom, the mushroom with a larger surface area compared to volume, such as lily mushroom, was more favorable in producing ergocalciferol. On the other hand when the mushrooms were freeze-dried and cut, the mushrooms with a higher ergosterol, such as king oyster mushroom, shiitake or button mushroom, were more favorable in generating ergocalciferol.