• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.191-194
• /
• 1998

본 논문에서는 OFDM 시스템에서 사용되는 부 반송파의 수와 동일한 길이의 complementary code를 사용하여 각 부 반송파 데이터를 frequency 영역에서 scrambling하는 PAPR 감소 방안을 제안한다. 이 방법은 부 반송파의 수와 동일한 길이의 complementary code 집합을 이용하여 주어진 데이터에 부과해서 PAPR 값이 가장 적은 complementary code를 사용하여 scrambled된 데이터를 송신함으로서 PAPR 값을 감소시키는 방법이다. 수신기에서의 복호를 위하여 Nc개의 complementary code에 해당하는 log2Nc 비트의 code 인덱스를 데이터와 함께 전송한다. 이때 code 인덱스 비트가 PAPR 값에 영향을 주지 않도록 하기 위하여 CODE인덱스와 데이터가 함께 complementary code로 scrambling되어진다. 제안된 이 방법을 사용하면 주파수 대역효율을 높이면서 PAPR 값을 크게 줄일 수 있다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.8
• /
• pp.65-69
• /
• 2012

We introduce a rotated square QAM constellation with low peak-to-average-power ratio (PAPR) for coordinate interleaved orthogonal design (CIOD). The proposed signal constellation has much lower PAPR than the ordinary square QAM constellations for CIOD while it keeps almost the same coordinate product distance (CPD).

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.3
• /
• pp.135-141
• /
• 2014

The inherent feature of the highly efficient spectrum usage has made Orthogonal Frequency Division Multiplexing (OFDM) preferable for Communication Standards. This study evaluated the performance of a Least Square (LS) estimator for a comb-type pilot insertion scheme over a fast fading Rayleigh channel. A High Peak-to-Average Power Ratio (PAPR) is one of the major downsides of the OFDM. The effects of an increase in the number of subcarriers on PAPR and the performance of the LS Estimator were studied. Increasing the number of subcarriers while keeping the pilots overhead constant resulted in improved performance of the LS estimator but the PAPR increased with increasing number of subcarriers. Therefore some trade-off between the number of subcarriers and the performance of the OFDM system is needed. The Mean Square Error (MSE) expression was also derived for the LS estimator in the case of a comb-type pilot arrangement. The MSE expression clearly explains the effects of the number of subcarriers on the performance of the LS estimator.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1550-1551
• /
• 2006

An L-band linear accelerator system for e-beam sterilization is under design for bio-technology application. The klystron-modulator system as RF microwave source has an important role as major components to offer the system reliability for long time steady state operation. A PFN line type pulse generator with a peak power of 71.5-MW, $7{\mu}s$, 285 pps is required to drive a high-power klystron. The high power pulse transformer has a function of transferring pulse energy from a pulsed power source to a high power load. The pulse transformer producing a pulse with a peak voltage of 275 kV is required to produce 30-MW peak and 60 kW average RF output power at the frequency of 1.3-GHz. We have designed the high power pulse transformer with 1:13 step-up ratio. The peak and average power capability is 71.5-MW (275 kV, 260 A at load side with $7{\mu}s$ pulse width) and 130 kW, respectively. In this paper, we present a system overview and initial design results of the high power pulse transformer.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.69-74
• /
• 2005

The High Peak to Average Power Ratio (PAPR) could be a severe Problem in OFDM performance since it causes the significant distortion to the transmitting signal through a nonlinear device such as High Power Amplifier (HPA). In this paper, the performance of Peak cancellation method according to the HPA characteristic is comparatively analyzed with the clipping and windowing methods. The BER performances and the out-band power spectrums are demonstrated in detail.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.995-1002
• /
• 2005

An orthogonal frequency division multiplexing(OFDM) system has the problem of the peak-to-average power ratio(PAR). In general, in order to obtain optimal PAR reduction using the partial transmitted sequence(PTS), the total search for the number of sub-blocks and the rotation factors must be accomplished. As the number of sub-blocks and rotation factors increases, PAR reduction improves, such that complexity increases exponentially and the process delay occurs simultaneously. Therefore a technique that reduces PAR, which is almost close to optimal, and the amount of calculation is desired. In this paper a new method using genetic algorithm(GA), which is widely used to search for a point that is globally optimal in many problems, is proposed to search for a rotation factor that reduces simultaneously both the PAR and the amount of calculation, such that the complexity of calculation and the process time are reduced at the same time, Comparison is performed between the proposed method and the various techniques developed previously. The superiority of proposed method is presented by demonstrating the reduction of complexity while a similar PAR reduction is obtained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.203-209
• /
• 2010

In this paper, we propose a new selected mapping (SLM) scheme for reducing peak to average power ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) signals modulated with quadrature amplitude modulation (QAM), called amplitude and phase variant SLM (APSLM). Contrary to the conventional SLM which rotates the phases of QAM symbols in the frequency domain, the proposed scheme changes the magnitudes as well as the phases of QAM symbols by applying binary sequences to the binary data sequence before mapped to QAM symbols. Simulation results show that the proposed scheme has better PAPR reduction performance than the conventional SLM scheme for the QAM modulated OFDM signals, especially for the small number of subcarriers.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.7
• /
• pp.329-333
• /
• 2001

The pulsed poser system has been widely used to many applications, such as E/P(Electrostatic Precipitator), DeNox/DeSOx power system, ozon generator, etc. A pulse energy efficiency for load depends on the rising time, peak value, pulse duration and impedance matching, etc. The pulse generator generally required for short pusle duration and high peak value was forced to consider its volume and economy. In this study, developing a compact pulse generator that applied for cascading method to be made of two pulse transformers, we compared cascading voltage with non cascading one by applying the pulse energy to load. Adopting cascading technique to pulse transformer, we found that average cascading voltage was about 60[%] of theoretical value. Maximum cascading ratio was calculated at 60 times compared with non cascading voltage.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.901-906
• /
• 2005

In this paper, we propose a novel MHCOC (Mapped High Capacity Orthogonal Code) SS(Spread Spectrum) technique that reduces high PAPR (Peak power to Average Power Ratio) of HCOC SS system which was proposed to support high data rate transmission, and we compare to the conventional modulation technique such as MQAM SS that can transmit the same number of symbols at the same time. Moreover, we study on adaptation of this system to satisfy QoS (Quality of Service) that services the proper data rate according to the propagation channel quality information. We perform computer simulation to verify the performance of the proposed system and analyze its availability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2201-2216
• /
• 2015

Peak to average power ratio (PAPR) is one of the main imperfections in the broadband communication systems with multiple carriers. In this paper, a new crest factor reduction (CFR) scheme based on interleaved phase sequence called Dummy Sequence Insertion Enhanced Partial Transmit Sequence (DSI-EPTS) is proposed which effectively reduces the PAPR while at the same time keeps the total complexity low. Moreover, the prototype of the proposed scheme in field programmable gate array (FPGA) is demonstrated. In DSI-EPTS scheme, a new matrix of phase sequence is defined which leads to a significant reduction in hardware complexity due to its less searching operation to extract the optimum phase sequence. The obtained results show comparable performance with slight difference due to the FPGA constraints. The results show 5 dB reduction in PAPR by applying the DSI-EPTS scheme with low complexity and low power consumption.