• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.737-741
• /
• 2000

Portable communication devices such as laptop computers suffer impact-induced failure in their usage. Drop/impact performance of these products is one of important concerns of product design. Because of the small size of this kind of electronics products, it is very expensive, time-consuming and difficult to conduct drop tests to directly detect the failure mechanism and identify their drop behaviors. Finite element analysis provides a vital, powerful vehicle to solve the problems. The models are created with HYPERMESH, and the analysis is carried out with LS-DYNA3D. The analysis is focused on HDD impact behavior in acceleration peak values.

• 한국식품과학회지
• /
• 제29권3호
• /
• pp.417-426
• /
• 1997

미강을 혈중 콜레스테롤 저하 효과가 있는 기능성 식품소재의 원료로 활용하는 데 필요한 기초 자료를 얻기 위하여 미강 단백질의 가수 분해물을 제조하여 담즙산 결합 획분을 분리하고 일부 물리화학적 특성을 조사하였다. 미강 단백질을 탈지 미강으로부터 알칼리 추출과 등전점 침전 방법을 이용하여 제조하였다. 미강 단백질을 기질로 하여 pH-drop method로 측정한 효소의 상대적 활성과 가수분해시 가수분해율의 변화를 비교 평가하여 기질의 가수분해에 적합한 효소를 선택하였다. Esperase에 의한 가수분해물을 한외여과(MWCO : 10 kDa)하여 두 부분으로 나누었다. 각 분획물을 cholic acid를 공유결합 시킨 ${\omega}-aminohexyl$ Sepharose 4B column에 걸어, 소수성 상호작용에 의해 cholic acid와 결합하는 폴리펩티드 및 펩티드를 deoxycholate 완충용액으로 용출시켜 분리하였다. 겔투과 크로마토그래피(Sephadex G-50)를 이용하여 한외여과 여과백의 담즙산 결합물에 대해 분자량 분포를 측정한 결과, 대부분 $2\;kDa{\sim}10\;kDa$에 걸쳐 넓게 분포하였고 일부는 $0.2\;kDa{\sim}0.6\;kDa$사이에 존재하였다. 한외여과 잔류액의 담즙산 결합물에 대해서는 preparative reverse phase HPLC를 실시하여 미강 단백질 가수분해물에서 3개(R-1, 2, 3)의 Peak를 분리하였다. 각 peak의 총 아미노산과 유리 아미노산 조성을 분석하여 단백질, 폴리펩티드 및 펩티드 부분의 아미노산 조성을 조사하였다. 그 결과 미강 단백질 가수분해물에서 얻은 peak의 경우 proline 함량이 미강 단백질의 4배에 달했고, 평균 소수도가 높은 peak일수록 유리 아미노산이 함량이 높았으며 평균 소수도는 미강 단백질보다 다소 높은 것으로 나타났다.

• Restorative Dentistry and Endodontics
• /
• 제19권2호
• /
• pp.534-548
• /
• 1994

The purpose of this study is to observe the corrosion characteristics of seven dental amalgams (CAULK FINE CUT, CAULK SPHERICAL, OPTALLOY II, DISPERSALLOY, HI VERALOY, TYTIN, VALIANT) through the anodic polarization curve obtained by using a potentiostat. After each amalgam alloy and Hg being triturated, the triturated mass was inserted into the cylindrical metal mold, and condensed by hydrolic pressure(160 kg/$cm^2$). Each specimen was removed from the metal mold. 24 hours after condensation, specimens were polished with the emery paper and stored at room temperature for 1 week. The anodic polarization curves were employed to compare the corrosion behaviours of the amalgam in 0.9% saline solution, Fusayama's artificial saliva, and stimulated parotid saliva at $37^{\circ}C$ with 3-electrode potentiostat. After the immersion of specimen in electrolyte for 1 hour, the potential scan was begun. The potential scan range was. -1700m V ~ + 400m V(vs. S. C. E) in the working electrode and the scan rate was 50m V /sec. The results were as follows, 1. The corrosion potential, the potential of anodic current peak, and transpassive potential in the stimulated parotid saliva shifted to more anodic direction than those in saline solution, and the current density in the stimulated parotid saliva was lower than that in saline solution. Those in Fusayama's artificial saliva was similar to those in stimulated parotid saliva. 2. The anodic polarization profiles in Fusayama's artificial saliva and stimulated parotid saliva indicated a region of slow slope current density, which is extending from the corrosion potential to the potential of anodic current peak, but that in 0.9% saline solution indicated no region of slow slope. 3. The corrosion potentials for CAULK FINE CUT, CAULK SPHERICAL, and OPT ALLOY II had the similarity in 0.9% saline solution, Fusayama's artificial saliva and stimulated parotid saliva, but those for high coper amalgam and VALIANT had no similarity. 4. The current density for TYTIN amalgam in stimulated parotid saliva was the lowest among the others. 5. As for current density, there was no significant difference between palladium enriched VALINAT and other high copper amalgams.

• 한국식품영양과학회지
• /
• 제35권2호
• /
• pp.127-131
• /
• 2006

효소에 의한 옥수수 단백가수분해물의 천연항균제로서의 이용가능성을 조사하기 위하여 zein 단백질에 단백 가수분해 효소를 작용시켜 얻어진 가수분해물의 항균활성을 측정하고 membrane filter로 한외 여과하여 항균활성이 가장 높은 분획을 HPLC로 분취한 후 항균활성을 측정하고 MIC, 각종 세균에 대한 생육저해농도를 측정하여 다음과 같은 결과를 얻었다. Zein 단백질에 6종의 단백분해효소를 작용시켜 제조한 가수분해물 중 pepsin으로 작용시킨 것이 항균활성이 가장높았다. Membrane filter에 의하여 여과한가수분해물의 항균활성은 M.W. $10,000\~30,000$에서 가장 높았으며 $121^{\circ}C$에서 10분간 처리하여도 항균활성에 변화가 없는 열안정성이 매우 높았고 MIC는 2.5 mg/mL이었다. HPLC로 분리한 항균성 peptide의 N-말단 아미노산 조성은 leucine, glutamic acid, proline, phenylalanine, aspartic acid, argenine 순이었다. 분자량 $10,000\~30,000$의 가수분해 동결건조물을 3 mg/mL 농도로 nutrient broth 배지에 첨가하고 $37^{\circ}C$에서 배양하였을 때 크게 생육이 저해되었다.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.396-412
• /
• 1997

The purpose of this study is to observe the corrosion characteristics of five dental amalgams(CAULK FINE CUT, OPTALLOY II, DISPERSALLOY, TYTIN, and VALIANT) in the solutions with fluoride compound through the anodic polarization curve obtained by using a potentiostat. After each amalgam alloy and Hg being triturated, the triturated mass was inserted into the cylindrical metal mold, and condensed by hydraulic pressure(160 kg/$cm^2$). Each specimen was removed from the metal mold. Specimens were polished with the silicone carbide grinding paper 24 hours after condensation and stored at room temperature for 1 week. The anodic polarization curves were employed to compare the corrosion behaviours of the amalgams in 0.9 % saline solution and in the saline solutions with 2.2 ppm, 0.05 %, 2 % NaF, and 8 % $SnF_2$ at $37^{\circ}C$ with 3-electrode potentiostat. After the immersion of specimen in electrolyte for 30 minutes, the potential scan was begun. The potential scan range was -1500m V to + 800m V(vs. S.C.E.) in the working electrode and the scan rate was 50 mV/sec. The results were as follows, 1. The corrosion potential, the potential of anodic current peak, and transpassive potential in the saline solutions with NaF shifted to lower direction than those in normal saline solution, and the current density in the saline solutions with NaF was higher than that in normal saline solution. The differences were increased as the concentrations of NaF became higher. 2. The corrosion potential and transpassive potential in the saline solution with $SnF_2$ shifted to higher direction than those in normal saline solution, and the current density in the saline solution with $SnF_2$ was higher than that in normal saline solution after the corrosion potential. The anodic polarization curves in the saline solution with $SnF_2$ had no outstanding anodic current peak. 3. The corrosion potentials for high-copper amalgams were much higher than those for CAULK FINE CUT and OPTALLOY II in normal saline solution, but, as the concentrations of fluoride compound became higher, the differences in corrosion potentials between them were decreased. The corrosion potentials had the similarity in the saline solution with 2% NaF or 8% $SnF_2$. 4. The current density for TYTIN was the lowest among the others in normal saline solution and in the saline solution with 2.2 ppm or 0.05 % NaF. 5. There was no significant difference in current density between Pd-enriched VALIANT and other high-copper amalgams.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권6호
• /
• pp.114-122
• /
• 2018

이 연구에서는 사장교 및 현수교에 부착된 지진가속도계측기를 활용하여 교량의 안전성을 긴급하게 평가할 수 있는 기법을 제안한다. 실측된 지진가속도계측기의 상시 응답을 이용하여 구조해석 모델의 고유주파수와 비교를 통해 최대한 유사한 동적특성을 갖도록 모델링을 개선한다. 설계지진에 대한 지진해석을 수행하여 지진가속도계측기 설치 위치별 최대 변위를 도출하며, 도출된 변위는 사전에 관리기준치로서 시스템에 기 입력된다. 지진발생 시 실시간으로 측정된 가속도 시간이력을 필터링 후 2중적분을 통해 변위시간이력으로 변환한 뒤 최대 변위를 추출한다. 최종적으로 시스템에 기 입력된 관리기준치와 추출된 변위와의 비교를 통해 안전성을 평가한다. 경주지진 시 기록된 데이터를 활용한 12개 특수교량의 긴급 안전성평가 수행을 통해 제안된 방법의 적용성을 확인한다.

• 농업과학연구
• /
• 제43권1호
• /
• pp.28-32
• /
• 2016

This experiment was carried out to determine optimal culture conditions for the production of cut flowers and tubers of Calla (Zantedeschia 'Black Magic') in highlands. To achieve the research purpose, growth of 'Black Magic' Calla influenced by tuber hardness (3.3 and $6.0kg/cm^2$), $GA_3$ concentration (0, 100 and $200mgL^{-1}$), duration of $GA_3$ treatment (24 hr, 12 hr and 30min before planting) were investigated. When tubers have high hardness, those were not severely injured by soft rot disease regardless of $GA_3$ concentrations and treatment durations. Tubers with low tuber hardness showed more than 90% of soft rot occurrence when treated with $200mgL^{-1}$ $GA_3$ for 24 hrs before planting. However, soft rot did not occur when tubers were treated with $200mgL^{-1}$ $GA_3$ for 12 hrs before planting. In conclusion, $GA_3$ treatment results showed soft rot occurrence statistically significant degree in accordance with the bulbs hardness. In addition, the yield of the cut flowers is the result received the greatest effect in accordance with the bulbs in size and appeared to not be determined in accordance with the $GA_3$ treatment concentration and hardness bulbs. To obtain flowers without soft rot symptom, tubers (as $6.0kg/cm^2$) should be completely dried after $GA_3$ treatment.

• 한국전자파학회논문지
• /
• 제16권7호
• /
• pp.690-696
• /
• 2005

PAPR(Peak to Average Power Ratio)를 줄이는 것은 OFDM(Orthogonal Frequency Division Multiplexing) 통신 시스템에서 매우 중요하다. 본 방법은 Golay상보 부호에 의한 PAPR 감소 기법의 한 가지 방법으로서,부가 신호를 사용하지 않으면서 효과적으로 PAPR을 감소시킬 수 있는 방법이다. 기존의 상보 부호에 의한 PAPR의 감소기법은 오류 정정 부호를 사용하거나 부가 신호를 사용 데이터 전송율이 감소하게 된다 있다. 본 논문에서는 단지 복수위상 상보부호를 이용하여 4-QAM의 성상도를 16-QAM의 형태로 변환하고 부가신호의 추가 및 부호율 증가에 영향을 주지 않는 PAPR감소 기법을 제안한다.

• 전기학회논문지
• /
• 제67권2호
• /
• pp.224-232
• /
• 2018

According to government policy, renewable energy facility such as solar power generation is being implemented for newly constructed buildings. In recent years, the introduction of Energy Storage System (ESS) served as an emergency power for replacing an existing diesel generator has been increasing. Furthermore, in order to expand the efficacy of the ESS operation, operation in combination with renewable energy sources such as solar and wind power generation is increasing. Hence, development of the ESS operation algorithms for emergency mode as well as the peak power cut mode, which is the essential feature of ESS, are necessary. The operational scenarios of ESS need to consider load power requirement and the amount of the power generation by renewable energy sources. For the verification of the developed scenarios, tests under the actual situation are demanded, but there is a difficulty in simulating the emergency operation situation such as system failure in the actual site. Therefore, this paper proposes simulation models for the HILS(Hardware In the Loop Simulation) and operation modes developed through HILS for the ESS operated with renewable energy source under peak power reduction and emergency modes. The paper shows that the ESS operation scenarios developed through HILS work properly at the actual site, and it verifies the effectiveness of the control logic developed by the HILS.

• 반도체디스플레이기술학회지
• /
• 제4권1호
• /
• pp.29-34
• /
• 2005

Tungsten oxide($WO_{3}$) is suitable to materials for photochromic window in the visible region. The resistivities of CdS, $WO_{3}$, and $WO_{3}$/CdS films prepared by thermal evaporation method were $4.61\times 10\^{3}$, $7.59\times10^{3}$, and $6.29\times10^{3}$ $\omega$ cm. And x-ray diffraction patterns of CdS, $WO_{3}$/CdS films showed a preferred orientation of hexagonal(002), and the monoclinic(020) structure, respectively. The optical transmission were measured that the cut-on wavelength were 510nm, 380nm for CdS and $WO_{3}$ films respectively, and the transmission spectrum of $WO_{3}$/CdS was shifted into the visible region. Photoluminescence(PL) spectra showed the two peaks at 2.8 eV and 3.2 eV for the as-grown sample($WO_{3}$/CdS ($500{\AA}$), but the other sample($WO_{3}$/CdS ($1000{\AA}$)) had a peak energy value of 2.8 eV. The photochromism of $WO_{3}$/CdS films showed that the excitation of electron-hole pairs and subsequent coloration is shifted into visible-light range. And the spectral behavior of coloration turned out to be proportional to the excited electron-hole pairs creation rate of CdS film. This result is interpreted in terms of charge carrier injection from the CdS-layer into the $WO_{3}$ films. We found a value of about 2.8 eV of $WO_{3}$/CdS film which is somewhat higher than peak energy of 2.54 eV using CBD prepared by Bechinger et. al.