• 제목/요약/키워드: Peak resonant frequency

검색결과 112건 처리시간 0.027초

ZnS:Cu,Cl 후막형 전계 발광 소자의 CuCl 첨가량과 인가 전압의 진동수에 따른 발광 특성 연구 (Research of luminescent characteristics of ZnS:CuCl powder electroluminescent device according to the doping concentration of CuCl and frequency of the applied voltage)

  • 박용규;성현호;조황신;이종찬;박대희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
    • /
    • pp.22-25
    • /
    • 2000
  • ZnS:Cu,Cl 형광체의 여기 및 발광 스펙트럼 측정 결과 주게인 $Cl^-$ 이온과 받게인 $Cu^+$ 이온 사이의 흡수와 발광에 기인하는 peak과 국소화된 발광 중심인 $(CU_2)^{2+}$ 이온의 흡수와 발광에 기인하는 peak이 관측되었다. CuCl의 첨가량이 증가함에 따라 $Cu^+$ 이온의 농도가 증가하게 되어 $(Cu_2)^{2+}$ 이온에 기안하는 발광으로부터 공명 에너지 전달 (Resonant Energy Transfer)의 확률이 높아지기 때문에 513 nm를 중심으로 하는 발광의 세기가 증가하게 된다. 자체 제작한 ZnS:Cu,Cl 형광체를 이용하여 제작한 소자의 휘도 측정결과 400 Hz, 100 V 에서 CuCl 의 첨가량이 0.2 mole% 일 때 휘도가 최대였고, 진동수가 증가함에 따라 휘도가 포화되는 현상이 나타났다. CuCl의 첨가량이 증가함에 따라 513 nm를 중심으로 하는 발광이 강해지고 CIE 좌표값이 녹색영역으로 이동하게 된다. 진동수가 증가하면 인가된 전압의 유지 시간이 짧아지게 되어 발광의 감쇄시간이 긴 513 nm를 중심으로 하는 발광보다 감쇄시간이 짧은 458 nm를 중심으로 하는 발광이 강해지게 되고, CIE 좌표값이 청색영역으로 이동하게 된다.

  • PDF

해수 중 글루코오스 농도의 전기화학적 측정 (Electrochemical Determination of Glucose in Sea Water)

  • 김영한
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2000년도 추계학술대회논문집
    • /
    • pp.73.2-77
    • /
    • 2000
  • 해수의 산소요구량(COD; Chemical Oxygen Demand)을 수정진동자로 측정할 수 있는 지의 가능성을 검증하기 위하여 글루코오스 용액에서의 수정진동자의 전기화학적 특성을 조상하였다. 산소요구량을 측정하기 위해서 수정진동자의 표면이 산화되어야 하므로 상대적으로 활성이 있는 금속을 9 MHzAT형 수정진동자의 표면에 코팅하고 일정한 전위를 가할 때 전류와 공진저항의 변화를 조사함으로서 수정진동자의 전기화학적 특성을 조사하였다. 수정진동자는 특별히 제작된 용기에 설치하였고 수정진동자 분석기가 공진주파수와 공진저항의 동시 측정에 사용되었다. 글루코오스의 농도 변화에 따른 측정치의 변화를 관찰하여 농도와 전기화학적 특성의 상관관계를 추적하였다. 이러한 특성조사의 결과 글루코오스 농도가 900 ppm 이하에서는 표준전극 기준 -180mV의 전위가 가해질 때 농도와 초기 최대전류 사이에 직선관계가 있음을 알 수 있었고 이를 이용하면 해수 중 글루코오스 농도를 측정할 수 있으며 글루코오스 농도와 화학적 산소 요구량 사이에 직접적인 관계가 있음을 고려할 때 수정진동자를 이용한 화학적 산소요구량의 측정이 가능함을 알 수 있었다.

  • PDF

$(1-x)La_{2/3}TiO_3-xLaAlO_3$계의 마이크로파 유전 특성 (Microwave Dielectric properties of $(1-x)La_{2/3}TiO_3-xLaAlO_3$System)

  • 이경태;박현수;문종하
    • 한국세라믹학회지
    • /
    • 제34권4호
    • /
    • pp.368-372
    • /
    • 1997
  • The microwave dielectric properties of (1-x)La2/3TiO3-xLaAlO3 system in which LaAlO3 having $\varepsilon$r$\geq$90 and positive $\tau$f was investigated. The crystal system of (1-x)La2/3TiO3-xLaAlO3 was pseudo-cubic in the range of 0.1$\leq$x$\leq$0.07. Its lattice constant increased with increasing x in spite that the amount of LaAlO3 containing of smaller Al(0.57 $\AA$) ion than Ti(0.64 $\AA$) increased. As the amount of LaAlO3 increased from x=0.1 to 0.9, the relative dielectric constant ($\varepsilon$r) decreased from 50 to 23 and the temperature coefficient of resonant frequency($\tau$f) decreased from +84 to -50. On the other hand, the value of Q.f0 reached a maximum (148,000 at 7 GHz) at x=0.7, where a rapid increase in the peak intensity of XRD occured, and further increased after prolonged sintering. The microwave dielectric properties of $\varepsilon$r=37, Q.f0=47,000 (at 7 GHz), and $\tau$f=-2 ppm/$^{\circ}C$ were obtained near 0.6La2/3TiO3-0.4LaAlO3 (x=0.4) composition.

  • PDF

유한요소법을 이용한 골판지 포장화물내 배의 진동해석 (Vibration Analysis of Pears in Packaged Freight Using Finite Element Method)

  • 김만수;정현모;김기복
    • Journal of Biosystems Engineering
    • /
    • 제29권6호
    • /
    • pp.501-507
    • /
    • 2004
  • Fruits we subjected to complex dynamic stresses in the transportation environment. During a long journey from the production area to markets, there is always some degree of vibration present. Vibration inputs are transmitted from the vehicle through the packaging to the fruit. Inside, these cause sustained bouncing of fruits against each other and container wall. These steady state vibration input may cause serious fruit injury, and this damage is particularly severe whenever the fruit inside the package is free to bounce, and is vibrated at its resonant frequency. The determination of the resonant frequencies of the fruit may help the packaging designer to determine the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. The vibration characteristics of the pears in corrugated fiberboard container in transit were analyzed using FEM (finite element method) modeling, and the FEM modeling approach was first validated by comparing the results obtained from simulation and experiment for the pear in the frequency range 3 to 150 Hz and acceleration level of 0.25 G-rms and it was found that between simulated and measured frequencies of the pears have a relatively good agreement. It was observed that the fruit and vegetables in corrugated fiberboard container could be analyzed by finite element method. As the elastic modulus of the cushion materials of corrugated fiberboard pad and tray cup decreased, the first frequencies of upper and lower pears increased and the peak acceleration decreased.

공진회로를 이용한 고효율 Buc 컨버터의 구현 (Implementation of the high efficiency buck converter using the resonant circuit)

  • 임승하;사공석진
    • 전자공학회논문지B
    • /
    • 제33B권11호
    • /
    • pp.167-174
    • /
    • 1996
  • For the decreasing of switching loss, this paper designs the improved buck converter circuit and then compare with the conventional buck converter and finally analyzes the performance. When the switch is turn-off, in the buck converter using the smoothing capacitor, the flow of transient current and peak voltage having the high frequency components was generated because of the instantaneous open-state in the teminals of the switch. However, the buck converter presented in this paper eliminated this disadvantage by using the L-C circuit. Therefore, the higher PF in 0.85 is achieved than that of the buck converter using the smoothing capacitor. Also, due to the decreasing of the harmonic contain rate, the current usage rate is to be higher than that of the conventional buck converter by 4.48dB and the output voltage varient rate for the step response is to be lower 1.32 times than that of the conventional buck converter.

  • PDF

Two Dimensional Electronic Spectroscopy

  • Fleming, Graham R.;Yang, Min-O;Agarwal, Ritesh;Prall, Bradley S.;Kaufman, Laura J.;Neuwahl, Fred
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권8호
    • /
    • pp.1081-1090
    • /
    • 2003
  • Two different electronically resonant two-dimensional spectroscopies are described. The first, two-color photon echo peak shift spectroscopy, is sensitive to correlations in transition frequency between the initial and probed (final) states. It provides new insight into the mechanism of ultrafast solvation and should prove useful for characterizing dynamics in inhomogeneous systems in general. The second technique, fifth order threepulse scattering, contains two coherence periods whose durations are controlled. The entire two-dimensional surface was recorded for a dye molecule in dilute solution and a photosynthetic light-harvesting complex. The data provide insight into the short-time dynamics of solvation and exciton relaxation, respectively.

감쇠판이 부착된 원기둥의 동유체력 특성 (Hydrodynamic Forces Characteristics of a Circular Cylinder with a Damping Plate)

  • 조일형
    • 한국해양공학회지
    • /
    • 제25권1호
    • /
    • pp.1-7
    • /
    • 2011
  • The radiation of water waves by a heaving truncated circular cylinder with damping plate is solved in the frame of the three-dimensional linear potential theory. The damping plate has a distinct advantage in reducing the motion response of a floating circular cylinder by increasing the added mass and the damping coefficient. Using the matched eigenfunction expansion method, the characteristics of hydrodynamic added mass and the damping coefficient are investigated with various system parameters, such as the radius and submergence depth of the damping plate. It is found that both added mass and the damping coefficient are significantly increased due to the arranged features of the larger damping plate with shallow submergence, which are positive factors as a motion reduction device of the floating offshore platform. Also the numerical results for an oscillating submerged disk show that the added mass is negative and that the damping coefficient has a peak value at resonant frequency when submergence depth is sufficiently small.

HID 전자석 안정기의 고효율 설계 (Design of a High-Efficiency Electronic Ballast for HID Lamps)

  • 이치환;박선규;이성희;권우현
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2001년도 학술대회논문집
    • /
    • pp.109-113
    • /
    • 2001
  • A high-efficiency electronic ballast for HID lamps is presented. The ballast consists of a PFC and a resonant inverter. To reduce losses of ballast,7C link voltage is determined by taking into account the peak voltage of lamp and a filter-inductor at Bridge diode is employed in order to remove harmonics from PFC. The flux density B$_{m}$ is kept 0.2[T] on all of inductors. A small inductor is connected in series with an electrolytic capacitor of PFC to be operated no high-frequency components. The acoustic resonance is eliminated using the spread spectrum technique. Electronic ballast for 250W metal-halide lamp is implemented and the experimental results show that 97% efficiency, no acoustic resonance and low conducted EMI level.l.

  • PDF

Design and Optimization of Four Element Triangular Dielectric Resonator Antenna using PSO Algorithm for Wireless Applications

  • Dasi swathi
    • International Journal of Computer Science & Network Security
    • /
    • 제23권10호
    • /
    • pp.67-72
    • /
    • 2023
  • This paper portrays the design and optimization of a wideband four element triangular dielectric resonator antenna (TDRA) using PSO. The proposed antenna's radiation characteristics were extracted using Ansoft HFSS software. At a resonant frequency of 5-7 GHz, the four element antenna provides nearly 21 percent bandwidth and the optimized gives 5.82 dBi peak gain. The radiation patterns symmetry and uniformity are maintained throughout the operating bandwidth. for WLAN (IEEE 802.16) and WiMAX applications, the proposed antenna exhibits a consistent symmetric monopole type radiation pattern with low cross polarisation. The proposed antenna's performance was compared to that of other dielectric resonator antenna (DRA) shapes, and it was discovered that the TDRA uses a lot less radiation area to provide better performance than other DRA shapes and PSO optimized antenna increases the gain of the antenna

새로운 액티브 전압 클램프 ZVS-PWM 공진 고주파 인버터 (The New Active Voltage Clamp ZVS-PWM Resonant High-frequency Inverter)

  • 안용위;김홍신;문상필;우경일;박한석
    • 전기학회논문지P
    • /
    • 제66권4호
    • /
    • pp.188-193
    • /
    • 2017
  • In this paper, a ZVS-PWM high-frequency inverter with a PWM control function is applied to commercial system 220[Vrms], and a resonator type ZVS-PWM high-frequency inverter circuit with a fixed-two methods were proposed. The parameters of the transformer model equivalent circuit of a copier fixing device, which is an essential element in the parameter optimization of the proposed circuit, are obtained by using a high-frequency amplifier and its frequency characteristics are described. The proposed method compared to the existing single-ended ZVS-PFM high frequency inverter can suppress the voltage and current peak value of the power semiconductor switching device and reduce the switching loss. The efficiency of the proposed method itself is 98[%] at rated power output. Also, the efficiency of 96[%] can be obtained even at low output, so that the proposed high frequency inverter is very efficient inverter. The total efficiency from the commercial AC input to the inverter output is 93[%] at rated, which is considered efficient for use in copying machines. In addition, the diode bridge loss accounts for the largest portion of the overall system efficiency distribution. On the other hand, the nonparallel filter has a very low loss.