• 한국해양공학회지
• /
• 제34권6호
• /
• pp.419-427
• /
• 2020

In this study, a particle image velocimetry (PIV)-based pressure estimation method was investigated, with application to the wave-in-deck loading phenomenon. An experimental study was performed in a two-dimensional wave tank using a fixed deck structure under a focused wave, obtaining local pressures by pressure sensors, global loads by load cells, and instantaneous velocity fields using the PIV measurement technique. The PIV-based pressure estimation method was applied using the Euler equation as the governing equation, and the proper time step for the wave impact pressure was studied using the normalized root-mean-square deviation. The pressure estimation method showed good agreement for the local impact pressure in comparison with the measured pressure by the pressure sensors. However, some differences were observed in the peak pressure due to the limitations of the Euler equation and the sampling rate of the measurement system. Using the estimation method, the pressure fields during wave-in-deck loading were determined in the study, with an analysis of the mechanism of impact and negative pressure occurrence.

• 방송공학회논문지
• /
• 제14권2호
• /
• pp.114-126
• /
• 2009

본 논문에서는 PSNR(Peak-to-peak Signal to Noise Ratio)이 다른 어떤 척도보다도 화질의 평가에 있어서 중요하다는 전제하에 비쥬얼리듬(VR: Visual Rhythm) 정보를 특징정보로 이용하여 원본영상이 가용하지 않은 일반 시청자들의 STB(Set-Top Box) 재생영상으로부터 PSNR을 추정하는 방법을 제안하였다. 핵심 아이디어는 VR정보는 근사적으로 2차원 영상프레임을 1차원으로 투영한 정보라 할 수 있기 때문에 수직성분의 화소값들로만 이루어져 있을지라도 화면특성에 관한 상당한 정보를 가지고 있기 때문에 송수신단의 VR정보만을 이용하여 PSNR값을 추정하는 것이 가능하다는 것이다. 모의실험을 통해 VR정보로부터 추정한 PSNR값이 매 프레임 별로 2차원 재생영상으로부터 구한 PSNR을 근사적으로 추정함으로써 시청자들이 평균적으로 어느 정도의 화질로 시청하고 있는지 비교적 정확하게 모니터링이 가능하다는 것을 확인하였다. 제안된 방법은 심각한 화면열화가 발생한 시간 위치와 지속시간, 발생횟수 등의 통계정보뿐 아니라 이들을 시각적으로 직접 확인할 수 있으며, 자원이 부족한 STB의 연산부담을 최소화하면서 효율적으로 영상품질을 모니터링할 수 있는 장점이 있다.

• 한국방재학회 논문집
• /
• 제7권1호통권24호
• /
• pp.39-46
• /
• 2007

발파를 통한 지반굴착 시 화약의 폭발로 인해 발생되는 지반의 진동은 인근 지상구조물과 지하매설물에 영향을 미치게 된다. 이러한 영향은 구조물에 피해를 발생시킬 뿐만 아니라 도심지 공사의 경우 민원에 의한 문제로 많은 경제적, 시간적 피해를 야기하므로 이에 대한 사전 영향성 평가가 필요하다. 본 연구에서는 터 널상부에 재개발을 통한 주거시설 건립을 위해 부지조성을 목적으로 한 발파작업 시 터널의 안정성을 이론식과 유한차분해석 프로그램인 $FLAC^{2D}$를 이용하여 검토하였다.

• ETRI Journal
• /
• 제41권6호
• /
• pp.715-730
• /
• 2019

We propose a switched beam-forming antenna that satisfies not only ultra-wideband characteristics but also beam-forming in the WLAN frequency band using an ultra-wideband antenna and passive parasitic elements applying a broadband optimal reactance load algorithm. We design a power and phase estimation function and an error correction function by re-analyzing and normalizing all the components of the parasitic array using control system engineering. The proposed antenna is compared with an antenna with a pin diode and reactance load value, respectively. The pin diode is located between the passive parasitic elements and ground plane. An antenna beam can be formed in eight directions according to the pin diode ON (reflector)/OFF (director) state. The antenna with a reactance load value achieves a better VSWR and gain than the antenna with a pin diode. We confirm that a beam is formed in eight directions owing to the RF switch operation, and the measured peak gain is 7 dBi at 2.45 GHz and 10 dBi at 5.8 GHz.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.982-984
• /
• 1997

DSM activities have grown and matured over several years in Korea. KEPCO is currently offering some DSM programs in industrial, commercial, and residential customers such as rebate program in purchasing efficient measures. The systematic evaluation process of energy savings and peak reduction will be very important for deciding on the optimal investment of DSM activities in utilities in the future. In general, the estimation process of the potential savings of DSM activities include the determination of baseline electricity consumption, the instantaneous technical potential (ITP), the phased technical potential (PTP), the economic potential (EP), and the achievable potential (AP). The purpose of this article is to provide evaluation process of those DSM potential savings based on bottom-up approach and applicate to residential sector in Korea. In case study, ITP, EP are estimated to be respectively 21.5%, 5.7% of total energy consumption, and 4.1%, 2.5% of peak load in 2010.

• 융합신호처리학회논문지
• /
• 제5권4호
• /
• pp.287-293
• /
• 2004

본 논문은 밝기 변화가 심한 비디오 시퀀스에 대해 효율적인 움직임 보상 알고리즘을 제안한다. 제안한 알고리즘에서는 화면간의 밝기 변화 변수들을 추정하고 지역적인 움직임 보상을 수행한다. 밝기 변화가 심한 화면을 검출하기 위해 연속되는 두 프레임간의 히스토그램의 크로스 엔트로피를 계산하여 밝기 변화가 심한 화면을 그렇지 않은 화면과 나누어 밝기 변화가 심하지 않은 경우에 발생할 수 있는 불필요한 계산량을 줄였다. 밝기 변화가 심한 비디오 시퀀스에 대한 실험결과 제안한 알고리즘은 기존의 알고리즘에 비해 적은 계산량으로 높은 PSNR (peak signal to noise ratio) 성능을 나타내었다.

• 한국전산구조공학회논문집
• /
• 제20권5호
• /
• pp.623-628
• /
• 2007

마찰형 감쇠를 갖는 구조물은 구조물의 고유주기, 하중의 특성, 그리고 외부하중에 대한 마찰력의 상대적인 크기에 따라 강한 비선형성을 나타내므로, 구조물의 최대응답을 예측하기 매우 어렵다. 기존의 연구에서는 비선형 시스템을 등가의 선형 시스템으로 치환하거나, 구조물의 비선형 시간이력해석을 통한 응답스펙트럼 분석에 의한 간단한 확률해석에 의해 수행되었다. 지진 하중은 불확실성과 불규칙성을 갖고 있기 때문에 확률적으로 정의된다면, 지진하중을 받는 마찰형 감쇠를 갖는 구조물의 응답 역시 확률분포를 나타낼 것이다. 본 논문에서는 Kanai-Tajimi 필터를 이용해 생성된 인공지진하중에 대해 마찰형 감쇠를 갖는 구조물의 비선형 시간이력 해석이 수행되었다. 그리고 정규분포 확률밀도 함수에 선형 회귀분석을 통해 얻어진 구조물의 주기와 마찰력의 크기에 의한 변수를 업데이트 시킨 마찰형 감쇠를 갖는 구조물의 변위 응답 확률밀도함수식이 제시된다.

• 한국물환경학회지
• /
• 제31권3호
• /
• pp.241-252
• /
• 2015

Runoff behaviors by five bias correction methods were analyzed, which were Change Factor methods using past observed and estimated data by the estimation scenario with average annual calibration factor (CF_Y) or with average monthly calibration factor (CF_M), Quantile Mapping methods using past observed and estimated data considering cumulative distribution function for entire estimated data period (QM_E) or for dry and rainy season (QM_P), and Integrated method of CF_M+QM_E(CQ). The peak flow by CF_M and QM_P were twice as large as the measured peak flow, it was concluded that QM_P method has large uncertainty in monthly runoff estimation since the maximum precipitation by QM_P provided much difference to the other methods. The CQ method provided the precipitation amount, distribution, and frequency of the smallest differences to the observed data, compared to the other four methods. And the CQ method provided the rainfall-runoff behavior corresponding to the carbon dioxide emission scenario of SRES A1B. Climate change scenario with bias correction still contained uncertainty in accurate climate data generation. Therefore it is required to consider the trend of observed precipitation and the characteristics of bias correction methods so that the generated precipitation can be used properly in water resource management plan establishment.

• Steel and Composite Structures
• /
• 제20권4호
• /
• pp.777-799
• /
• 2016

One of the major components for performance based seismic design is accurate estimation of critical seismic demand parameters. While nonlinear seismic analysis is the most appropriate analysis method for estimation of seismic demand parameters, this method is very time consuming and complex. Single mode pushover analysis method, N2 method and multi-mode pushover analysis method, modal pushover analysis (MPA) are two nonlinear static methods that have recently been used for seismic performance evaluation of few lateral load-resisting systems. This paper further investigates the applicability of N2 and MPA methods for estimating the seismic demands of ductile unstiffened steel plate shear walls (SPSWs). Three different unstiffened SPSWs (4-, 8-, and 15-storey) designed according to capacity design approach were analysed under artificial and real ground motions for Vancouver. A comparison of seismic response quantities such as, height-wise distribution of floor displacements, storey drifts estimated using N2 and MPA methods with more accurate nonlinear seismic analysis indicates that both N2 and MPA procedures can reasonably estimates the peak top displacements for low-rise SPSW buildings. In addition, MPA procedure provides better predictions of inter-storey drifts for taller SPSW. The MPA procedure has been extended to provide better estimate of base shear of SPSW.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권3호
• /
• pp.421-425
• /
• 2018

The icebreaking research vessel ARAON performed ice field tests during her 2016 Arctic voyage. The ship is subjected to ice loads through ice-ship interaction processes. Local ice load acting on ARAON's bow section was measured by using stain gauges installed on the inner hull plates and transverse frames of bow section. In this paper the local ice loads at transverse frames estimated from shear strain data were compared to ice loads from hull plate pressures by using the influence coefficient method. In addition to the analysis of local ice loads, the characteristics of peak ice loads with the ship speed is also discussed. It is recommended that the local ice loads estimated by calculating shear forces acting on transverse frames may be useful in estimating local ice loads on the hull of ship.