• Safety and Health at Work
• /
• 제15권1호
• /
• pp.102-109
• /
• 2024

Background: In today's modern world, longer working hours, shift work, and working at night have become major causes of the disruption of our natural circadian rhythms. This study aimed to investigate the effects of the type of shift work (rotating vs. fixed day), duty period (on-duty vs. off-duty), and working period within each shift (nighttime vs. daytime) on the circadian rhythm characteristics of nurses who provide direct patient care. Methods: This cross-sectional study used a purposive sampling method. Cosinor analysis was applied to analyze the actigraphy data of nurses providing direct patient care for seven consecutive days. The linear mixed effects model was then used to determine any variances between shift type, duty period, and working period within each shift for the nurses. Results: The mesor value did not differ according to nurses' shift type, duty period, and working period within each shift. The amplitude was statistically higher in on-duty nurses and in daytime working hours. The acrophase was significantly delayed in nighttime working hours. As well as nurses in rotating shift had experience. Conclusion: Our findings revealed that the peak activity of nurses occurs significantly later at night while working and nurses working during nighttime hours may have a weaker or less distinct circadian rhythm. Thus, this study suggests that limits be placed on the number of rotating nighttime shifts for nurses.

• 조명전기설비학회논문지
• /
• 제21권4호
• /
• pp.61-72
• /
• 2007

This study proposed a high efficiency DC-DC converter with a new current doubler rectifier for fuel-cell systems for use with the Nexa(310-0027) PEMFC from the Ballard Co. The proposed high efficiency DC-DC converter for the fuel-cell system generated ZVS by applying partial resonance and using a phase shift PWM control method. Constantly switching frequency, loss of switching, peak current, and peak voltage were reduced by this system. In addition to this system, two inductors were attached to a rectifier circuit allowing it to be able to provide the direct current(DC) and DC voltage safely to a load with reduced ripple components. Also, by using the newly proposed current doubler rectifier, the high frequency DC-DC converter for the fuel cell system was capable of reaching a highest efficiency of 92[%] as compared to 88.3[%] efficiency in previous results, which means that efficiency increased 3.7[%]. The overall results were confirmed by a simulation and laboratory experiment.

• 전력전자학회논문지
• /
• 제23권2호
• /
• pp.147-151
• /
• 2018

Phase-shift fullbridge (PSFB) converter detects the current in the primary side for operation of the peak current mode controller (PCMC). The PCMC must used the slope compensation to solve the problem when the effective duty is over 0.5. The voltage response of PSFB converters has slower than that of buck converter because of slew interval even if the voltage controllers of two converters have same bandwidth. To overcome these problems, this work proposes a compensating method of current reference considering slew interval and fast response in the PSFB converter. The effectiveness of the proposed method is proven using the PSIM simulation and experiment.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.188-196
• /
• 2005

Accident reports from 1991 to 2000 of a steel company were used to analyze which factors induce industrial accidents. The subjects were 8,311 blue-collar workers, who sustained 114 occupational injuries and work on a continuous full-day 3-team 3-shift system of backward rotation(mornings to afternoons to nights). With respect to marital status, the occupational injury rate(OIR) on the married workers was significantly higher compared to unmarried workers. With respect to no, the OIR of those in their early 20s was significantly higher when compared to other age groups. The OIR of highly educated workers showed a reduction when compared with lower educated workers. The OIR of shift workers were significantly higher compared with the daytime workers. The OIR of type of work decreased across the steel manufacturing process, rolling process, machine maintenance section forwarding products section to the field management section. With respect to the block of shift work(morning, afternoon, and night shifts) by the type of work, the OIR of the night shift was higher than those of the morning shift in the steel manufacturing process or forwarding products section. The OIR of the machine maintenance section was slightly higher in the morning shift than those of the night shift. The OIR of the time of day of the shift workers reached a peak between 09:00 and 11:00. The OIR of a slight injury to shift workers decreased across the night, afternoon, to morning shifts whereas the OIR of a serious injury tended to decrease across the night, morning, to afternoon shift. The body parts most commonly injured were the arm and the crus.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.233-236
• /
• 2001

Orthogonal freqency division multiplexing (OFDM) is an attractive technique for achieving high-bit-rate wireless data transmission. However, the potentially large peak-to-average power ratio (PAPR) has limited its application; An OFDM signal with the large PAPR can cause power degradation (In-band distortion) and spectral spreading (Out-of-band distortion) by being clipped passing through a power amplifier. Thus, we propose the combining algorithm of Hadamard transform and phase shift, which is ascribed to the relation between the correlation of the IFFT input sequence function and PAPR. Extensive computer simulations show that the combining algorithm is an effective technique to reduce PAPR.

• 한국자기학회지
• /
• 제4권1호
• /
• pp.20-24
• /
• 1994

CoCr/NiFe 이중매체의 기록, 재생특성은 CoCr 기록층뿐만 아니라 NiFe연자성층의 자기적 특성에도 강하게 영향을 받는다. NiFe/Ge의 다층화로 CoCr/NiFe 매체의 기록감도와 재생전압을 증 가시킬 수 있었으며 이것은 연자성층의 높은 투자율과 CoCr기록층의 높은 수직이방성에 기인하였다. 그러나 연자성층의 투자율의 향상이 기록감도의 현저한 향상에 비해 재생전압의 현저한 증가를 가 져오지 못하는데 이것은 유한요소수치해석에서도 확인할 수 있었다. 반면에 NiFe/Ge 다층연자성박 막을 사용한 CoCr/NiFe 매체의 피크이동(peak shift)특성은 NiFe 단층연자성박막을 사용한 CoCr/NiFe 매체에 비해 악화되었다. 그러나 CoCr층과 NiFe층 사이에 10 nm의 CoZrNb 박막을 삽입시키면 높은 재생전압과 낮은 파크이동을 동시에 얻을 수 있었다. 이 연구에서 는 이러한 기록, 재생특성을 미 세구조와 연관시켜 검토하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.276-279
• /
• 2003

The phase change upon reflection from target surfaces in white-light interferometer induces measurement errors when target surfaces are composed of dissimilar materials. We prove that this phase change on reflection considered of the polarization of the white-light causes the shift of both envelope peak position and fringe peak position of several tens of nanometer. In addition, we propose a new equation of white-light interference fringe pertinent to the polarization of source.

• Journal of Information Display
• /
• 제2권4호
• /
• pp.19-22
• /
• 2001

In this paper, we describe the electro-optic effects of photonic crystals made of a synthetic opal filled with a nematic liquid crystal(LC). By applying an external electric field, a shift in the Bragg reflection peak position(stop band) and a field-induced change in its peak reflectivity are observed. These significant surface alignment effects of the opal-LC composite are discussed in a similar manner for Freederick-type transitions of LC within a confined geometry in the presence of external fields.

• 천문학회보
• /
• 제35권1호
• /
• pp.28.2-28.2
• /
• 2010

We have investigated seven Extreme-Ultraviolet (EUV) bright points in the active region (AR 10926) on 2006 December 2 by the EUV imaging spectrometer (EIS) onboard Hinode spacecraft. We determined their Doppler velocities and non-thermal velocities from 15 EUV spectral lines (log T=4.7-7.2) by fitting each line profile to a Gaussian function. We present the Doppler velocity map as a function of temperature which corresponds to a different height. As a result, these active region bright points show two different types of characteristics. Type 1 bright point shows a systematic increase of Doppler velocity from -68 km/s (blue shift) at log T=4.7 to 27 km/s (red shift) at log T=6.7, while type 2 bright points have Doppler velocities in the range of -20 km/s and 20 km/s. Using MDI magnetograms, we found that only type 1 bright point was associated with the canceling magnetic feature at the rate of $2.4{\times}10^{18}$ Mx/hour. When assuming that these bright points are caused by magnetic reconnection and the Doppler shift indicates reconnection out flow, the pattern of the Doppler shift implies that type 1 bright point should be related to low atmosphere magnetic reconnection. We also determined electron densities from line ratio as well as temperatures from emission measure loci using CHIANTI atomic database. The electron densities of all bright points are comparable to typical values of active regions (log Ne=9.9-10.4). For the temperature analysis, the emission loci plots indicate that these bright points should not be isothermal though background is isothermal. The DEM analysis also show that while the background has a single peak distribution (isothermal), the EUV bright points, double peak distributions.

• Journal of Information Display
• /
• 제13권1호
• /
• pp.37-42
• /
• 2012

An empirical functional form was suggested for the analysis of the emission spectrum of high-power light-emitting diode (LED) consisting of a sharp blue peak from the LED chips and a broad yellow peak from the phosphor layer. The peak positions, half widths, shape parameters, and amplitudes of these two peaks were reliably obtained as a function of the temperature, and the results were discussed qualitatively in relation with the junction temperature. The adoption of an inert liquid was found to have significantly reduced the LED temperature and the color shift of the emitted light. The phenomenological approach used in this study may be helpful in the simulation of the LED spectrum under various thermal conditions, and may thus be helpful in the improvement of the device performance.