• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.62-70
• /
• 2005

The nanoindenter and AFM have been used for nanofabrication, such as nanolithography, nanowriting, and nanopatterning, as well as measurement of mechanical properties and surface topology. Nanoscale indents can be used as cells for molecular electronics and drug delivery, slots for integration into nanodevices, and defects for tailoring the structure and properties. Therefore, it is very important to make indents of desired morphology (shape, size and depth). Indents of different shapes can be obtained by using indenters of different geometries such as a cube comer and conical and spherical tips. The depth and size of indents can be controlled by making indentations at different indentation loads. However, in case of viscoplastic viscoelastic materials such as polymethylmethacrylate (PMMA) the time dependent deformation (TDD) should also be considered. In this study, the effect of process parameters such as loading rate and hold-time at peak load on the indent morphology (maximum penetration depth, elastic recovery, transient creep recovery, residual depth pile-up height) of PMMA were studied for hyperfine pattern fabrication.

• 자원환경지질
• /
• 제21권2호
• /
• pp.175-184
• /
• 1988

감포지역(甘浦地域)의 용동리에서 용동리응회암(龍洞里凝灰岩)내에 배태되는 Ca-몬모릴로나이트들은 비록 동일층준(同一層準)에서 산출(産出)되나 제한적(制限的)이지만 화학조성(化學組成)의 차이(差異)가 나타난다. 이들의 열적특성은 "비정상형(型)"으로 나타나며, 탈수와 관계된 흡열반응피크의 온도(溫度)는 사면체내의 Si를 치환한 Al의 양적비에 따라 약간변화된다. 이러한 사실은 제한적인 화학조성의 변화는 열적특성에 큰 영향을 미치지 못함을 지시한다. 시차주사열량 측정결과 2가의 양이온으로 치환 된 시료의 경우 1가의 양이온으로 치환된 시료보다 흡열용량이 증가되는 경향을 보이므로 시료내의 우세한 양이온의 종류를 예상할 수 있으며, 전기음성도가 큰 이온일수록 더 많은 물분자를 취(取)함을 알수있다.

• 한국생활과학회지
• /
• 제20권6호
• /
• pp.1229-1237
• /
• 2011

The objective of this study was to evaluate the quality characteristics of Cheongpomook prepared with five different levels of mungbean powder (0, 25, 50, 75, and 100%). We conducted the Hunter's color values, the rheological characteristics, sensory evaluations, and pasting properties of the Cheongpomook samples. The more mungbean powder was added, the more the luminance and Hunter's a values of Cheongpomook samples were decreased, but in Hunter's a values was reverse. With regard to the rheological properties of the Cheongpomook samples, the more mungbean powder was added, the values of hardness, springiness, gumminess, and chewiness were significantly decreased. In color, taste, and overall quality, the value of 25% mungbean powder added Cheongpomook (MP1) and 50% added Cheongpomook (MP2) were significantly higher than those of others. The resulting RVA viscogram, peak viscosity, hold viscosity, break down, setback, and final viscosity of Cheongpomook were decreased with an increase in mungbean powder, but the pasting temperature was increased slightly. Therefore, an addition of 25% mungbean powder appears to be an acceptable approach to enhance the quality of Cheongpomook without reducing acceptability.

• 한국음향학회지
• /
• 제28권8호
• /
• pp.822-831
• /
• 2009

애자는 송전선 시스템에서 전기적으로나 기계적으로 매우 중요한 소자이다. 송전선 시스템에 설치된 이후 애자의 열화 등에 의해 고장이 난 애자를 찾아내기 위해 애자로 부터의 방사 소음을 측정하여 분석하였다. 대상으로 한 제품은 2종류의 현수 애자, COS, 2종류의 Line Poster, 피뢰기이며, 이들 제품의 정상 상태와 고장 상태의 방사 소음을 각각 측정하여 시간 파형, 주파수 스펙트럼, 피크 검출의 결과를 서로 비교하여 그 차이점을 제시하였다. 또한, 이를 바탕으로 방사 소음으로부터 고장 상태의 애자의 검출의 가능성 및 그 방법을 제시하였다.

• Journal of Biosystems Engineering
• /
• 제24권2호
• /
• pp.115-122
• /
• 1999

Because of their small mass, volume, solid state construction and long life, light-emitting diodes(LEDs) hold promises as a lighting source for intensive plant production system. Spectral characteristics and light intensity of LEDs were tested to investigate their feasibility as artificial lighting sources for growth and morphogenesis control in transplant production system. Blue, green, and red LEDs had a peak-emission wavelength at 442nm, 522nm, and 673nm, respectively. Their half width defined as the difference between upper and lower wavelength in the intensity equivalent to 50% of the maximum intensity showed 26nm, 41nm, and 74nm, respectively. Photosynthetic photon flux(PPE) at the distance of 9cm under the LEDs array was measured as $235{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ for red, $109{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ for green, and $75{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ for blue LEDs. At the same distance, green LEDs had the illuminance of 13,0001x, nine to ten times higher than those of red and blue LEDs. Red, green, and blue LEDs at a distance of 9cm had the irradiance of $46W{\cdot}m^{-2},\;19W{\cdot}m^{-2},\;8W{\cdot}m^{-2}$, respectively. Light intensity of blue, green, and red LEDs increased linearly in proportion to the magnitude of the current applied to the operating circuit. Thus the light intensity of LEDs was controlled by the applied current in operating circuit.

• 한국전자파학회논문지
• /
• 제21권5호
• /
• pp.510-518
• /
• 2010

본 논문에서는 UHF 대역(380~910 MHz)의 간이 무선 및 TRS(Trunked Radio System) 단말기에서 이용 가능한 CFL(Cartesian Feedback Loop) 선형화 칩을 Si 기반의 $0.6\;{\mu}m$ BiCMOS 공정을 이용하여 설계 및 제작한 결과를 보였다. 단말기의 송신 전력을 가변하기 위한 이득 제어 회로를 궤환 경로뿐만 아나라 순방향 경로에도 삽입함으로써 CFL의 안정성을 일정하게 유지하도록 하였으며, 무전기 PTT(Push-To-Talk) 동작에 적합하고 구현이 용이한 S/H(Sample & Hold) 구조를 이용한 DC-offset 제거 기능을 구현하였다. 송신 시험 결과, CQPSK(Compatible QPSK) 신호 인가 시, PEP(Peak Envelope Power) 3 W(34.8 dBm) 출력에서 FCC의 방사 마스크 규격을 만족함을 확인하였으며, Two-tone 인가 시, 30 dB 이상의 3차 IMD 성분 개선을 확인하였다.

• Journal of Forest and Environmental Science
• /
• 제34권4호
• /
• pp.293-303
• /
• 2018

Sumber Jaya (54,194 hectares) is a district in West Lampung, Indonesia, located at the upper part of Tulang Bawang watershed. This watershed is one major water resource for Lampung Province, but has become a focal point of discussion because of the widespread conversion of forestland to coffee plantations and human settlements which lead to environmental and hydrological problems. This research aimed to evaluate Sumber Jaya watershed affecting by rapid land use change using hydrological methods as a base for watershed management. Nested catchment structure consisted of eight sub-catchments was employed in this research to assess scaling issues of land use change impacts on rainfall-runoff connections. Six tipping bucket rain gages were installed on the hill slopes of each sub-catchment and Parshall flumes were installed at the outlets of each sub-catchment to monitor stream flow. First, unit hydrograph that expressed the relationship of rainfall and runoff was computed using IHACRES model. Second, unit hydrograph was also constructed from observations of input and response during several significant storms with approximately equal duration. The result showed that most of the storm flow from these catchments consisted of slow flow. A maximum of about 50% of the effective rainfall became quick flow, and only less than 10% of remaining effective rainfall which was routed as slow flow contributed to hydrograph peaks; the rest was stored. Also, comparing peak responses and recession rates on the hydrograph, storm flow discharge was generally increased slowly on the rising limb and decreased rapidly on the falling limb. These responses indicated the soils in these catchments were still able to hold and store rain water.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.463-465
• /
• 2005

The $ZnGa_2O_4$:Mn phosphor was synthesized through solid-state reactions at the various molar ratio of Mn from 0.002 % to 0.01 %. Structural and optical properties of the $ZnGa_2O_4$:Mn phosphor was investigated by using X-ray diffraction (XRD), and cathodoluminescence (CL) measurements. The XRD patterns show that the Mn-doped $ZnGa_2O_4$ has a (311) main peak and a spinel phase. Also the emission wavelength shifts from 420 to 510 nm in comparison with $ZnGa_2O_4$ when Mn is doped in $ZnGa_2O_4$. These results indicate that $ZnGa_2O_4$:Mn phosphors hold promise for potential applications in field-emission display devices with high brightness operating in green spectral regions.

• Computers and Concrete
• /
• 제34권3호
• /
• pp.307-328
• /
• 2024

The concrete damage plasticity (CDP) model is widely used to simulate concrete behaviour using either implicit or explicit analysis methods. To effectively execute the models and resolve convergence issues in implicit analysis, activating the viscosity parameter of this material model is a common practice. Despite the frequent application of implicit analysis to analyse concrete structures with the CDP model, the viscosity parameter significantly varies among available models and lacks consistency. The adjustment of the viscosity parameter at the element/structural level disregards its indirect impact on the material. Therefore, the accuracy of the numerical model is confined to the validated range and might not hold true for other values, often explored in parametric studies subsequent to validations. To address these challenges and develop a unified numerical model for varied conditions, a quasi-static analysis using the explicit solver was conducted in this study. Fifteen thick flat plates tested under load control with different geometries and different eccentric loads were considered to verify the accuracy of the model. The study first investigated various concrete material behaviours under compression and tension as well as the concrete tensile strength to identify the most reliable models from previous methodologies. The study compared the results using both implicit and explicit analysis. It was found that, in implicit analysis, the viscosity parameter should be as low as 0.0001 to avoid affecting material properties. However, at the structural level, the optimum value may need adjustment between 0.00001 to 0.0001 with changing geometries and loading type. This observation raises concerns about further parametric study if the specific value of the viscosity parameter is used. Additionally, activating the viscosity parameter in load control simulations confirmed its inability to capture the peak load. Conversely, the unified explicit model accurately simulated the behaviour of the test specimens under varying geometries, load eccentricities, and column sizes. This study recommends restricting implicit solutions to the viscosity values proposed in this research. Alternatively, for highly nonlinear problems under load control simulation, explicit analysis stands as an effective approach, ensuring unified parameters across a wide range of applications without convergence problems.

• 한국운동역학회지
• /
• 제16권1호
• /
• pp.55-63
• /
• 2006

The purpose of this study is to prove the kinematical characteristics of Deff motion, the high bar performance, in terms of flying phases so that we can provide basic sources for improving gymnastic performance. To do this, we selected and analyzed the performance of two athletes who did Deff motion in the high bar competition of male artistic gymnastic in the 22nd Universiade 2003 Daegu. We drew the conclusions from the kinematical factors that were came out through analyzing three-dimensional cinematography of the athletes' movements, by using a high speed video camera. To make a successful performance, a performer releases the bar at a height of a high bar vertically and at a height of 82cm horizontally, and the flying performance should be made without moving forward, as maintaining the proper balance, in order to rise over 118cm high during the flying phase. When the performer is releasing the bar, an increase of the vertical speed in the center of the body and extension of a knee joint and a hip joint contribute to increasing a flying height. And when the moving body is twisted, leaning to left side is caused by the winding movement of a knee joint, which causes an unstable bar grasp. To grasp the bar stably, just before releasing the performer should gain propulsive force from twisting rotation through increasing the speed of shoulder rotation. And before the peak point, the performer should make sure of a body rotation distance over $164^{\circ}$ so that he or she can do an aerial rotary performance smoothly. When grasping the high bar, the center of the body should be above the bar and the angle of shoulder rotation should be maintained close to $540^{\circ}$ simultaneously. he high point performance(S1) has more speed on an ascending phase and less speed on a descending phase than the low point performance (S2). At the peak point, both the rotation angle of the body and that of the shoulder in high point performance are big as well. In conclusion, it is shown that a performer can make a jump toward the high bar easily with the body straight because the performer can hold the upper part of the body erect early in a descending phase.