• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.154-159
• /
• 2005

In proportion to the increase of industrial development, emission troubles were concerned as global issue. For these reasons, so many researchers and associated institutes effort to reduce pollution with new technology and various devices. As a kind of these methods, we used catalysts as a after-treatment system. At first, we made equipment of model furnace. And various catalysts were equipped at exhaust duct of combustion system, and excess air ratio( ), change cell numbers, catalyst materials(Pt, Pd) were changed as experimental conditions. With these various condition, temperature, NOx, CO, HC, $CO_2$ and $O_2$ concentration were measured. As a result, NOx conversion were increased with increasing of cell number in Pd catalyst. And Pt catalyst were became 100% conversion at 200 and 300 cell. Also, Pt catalyst was better than Pd catalyst ${\alpha}$=1.5 in this condition. In addition, CO and HC concentrations were decreased${\alpha}$=1.5 with Pd catalyst.

• 한국재료학회지
• /
• 제11권10호
• /
• pp.846-850
• /
• 2001

In the present study, nano-size powders of ternary ferrites, $Ni_{0.5}Zn_{0.5}Fe_2O_4$, as the potential catalysts of $CO_2$decomposition, were prepared by the wet processing of hydrothermal synthesis and coprecipitation method, and the catalyzing effects of impregnation of the noble metals, Pt and Pd, onto $Ni_{0.5}Zn_{0.5}Fe_2O_4$for the $CO_2$decomposition were investigated. XRD results of the synthesized ferrites showed a typical spinel structure of ferrite and the particle size was very small as about 6~10 nm. BET surface area of the ternary ferrites was not affected by the impregnation of Pt and Pd. The reactivity of the $CO_2$decomposition to carbon was improved by the impregnation of the noble metals of Pd and Pt. The effect of Pd-impregnation on the $CO_2$decomposition rate was higher than Pt-impregnation.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.8-16
• /
• 2006

The research was conducted to characterize of Rh-Pd-Pt TWC with a double-layer washcoat for gasoline vehicle. The physical characteristics on surface of catalyst were inspected by BET, SEM and TEM. The characteristics of catalytic reaction were examined by the TPD/TPR and CO-pulse chemisorption. The catalyst $6Hx(0.35\times11\times3)$ showed superior conversion performance after hydrothermal aging process, which was due to small difference of the surface area between. the fresh and the aged catalyst. The CO-chemisorption and surface area were superior in the 600 cpsi catalyst than other catalysts, this catalyst also shown the higher conversion efficiency of the exhaust emissions. From the TPR test, the conversion performance of the aged catalyst was decreased by the agglomeration and sintering of the PM and metal oxides. From the TPD result, it was found that the NO chemisorption was happed on the bottom-layer washcoat with Pd, and the NO chemisorption was re-happened on the upper-layer washcoat with Pt and Rh in the desorption process.

• Bulletin of the Korean Chemical Society
• /
• 제25권9호
• /
• pp.1355-1360
• /
• 2004

The oxidative decomposition of trichloroethylene (TCE) was investigated using palladium catalysts supported on pure and sulfated zirconia. The reactions were performed under dry and wet conditions in the temperature between 200 and $550^{\circ}C$ keeping GHSV of 14,000 $h^{-1}.$ The products such as $C_2Cl_4,\;C_2HCl_5,\;CO\;and\;CO_2$ were observed in the reaction. The addition of water in the feed affected the distribution of reaction product with dramatically improved catalytic activity. The spectroscopic investigations gave an evidence that the strong acid sites play an important role on controlling the catalytic activity. Among the catalysts investigated, the Pd-loaded sulfated zirconia catalyst with 1 wt% Pd was found to exhibit the highest catalytic activity in the presence of water vapor having the stability for 30 h of the reaction at $500^{\circ}C$. The successful performance of the catalyst might be attributed to promotional effect of Pd active sites and strong acid sites induced from surface sulfate species on zirconia.

• 공업화학
• /
• 제2권2호
• /
• pp.138-146
• /
• 1991

실리카-알루미나에 담지된 팔라듐 촉매를 제조하여 아크로레인과 암모니아로부터 피리딘과 ${\beta}$-피콜린의 합성반응에 사용하였다. 시간이 경과함에 따라 촉매표면에 생성된 침적물에 의하여 촉매의 활성이 크게 감소하였다. TPR 실험 결과 이 침적물은 아크로레인과 암모니아의 축합 중합에 의하여 생성됨을 알 수 있었다. 전화율과 피리딘 및 ${\beta}$-피콜린의 생성속도는 아크로레인의 분압이 증가할수록 감소하였다. 침적물의 양과 촉매재생 온도는 아크로레인의 분압에 따라 증가하였으나 암모니아의 분압에는 큰 영향을 받지 않았다.

• 청정기술
• /
• 제16권1호
• /
• pp.19-25
• /
• 2010

결정성의 셀룰로우스를 수소분위기하에서 다양한 귀금속 촉매를 이용하여 폴리올로 전환시키는 연구를 수행하였다. 촉매는 단일 귀금속(Pt, Ru, Ir, Rh, Pd)을 활성탄에 습식함침법으로 담지시켜서 제조하였으며, Pt/$\gamma-Al_2O_3$와 Pt/H-mordenite를 비교촉매로 사용하였다. 생성물은 고압액체크로마토그래피로 분석하였다. 촉매는 질소흡착, X-선 회절법, 유도결합플라즈마분광법(ICP-AES), 수소-승원환원분석($H_2$-TPR), 그리고 일산화탄소 화학흡착을 통하여 분석하였다. 셀룰로우스의 전환율은 사용한 촉매와 연관관계가 낮은 것으로 나타났으며 활성탄에 담지된 귀금속 촉매중에서 Pt/AC가 높은 폴리올의 수득률에 바람직한 것으로 조사되었다.

• 공업화학
• /
• 제31권6호
• /
• pp.674-678
• /
• 2020

본 연구에서는 상온 조건에서 추가적인 에너지원 없이 H2 산화가 가능한 Pd/TiO2 촉매를 제조하였고, 지지체인 TiO2의 비표면적은 Pd/TiO2 촉매의 H2 산화 반응 성능과 비례하지는 않은 것을 확인하였다. 또한 촉매의 물성 변화에 의한 성능 영향 평가를 위하여 La2O3를 Pd/TiO2 촉매에 첨가하였다. La2O3를 TiO2에 함량별로 첨가하여 Pd/La2O3-TiO2를 제조하였고, CO chemisorption 분석을 진행하였다. Pd/TiO2(G) 촉매의 전환율(14% at 0.5% H2)과 비교하여 Pd/La2O3-TiO2 촉매가 74% 전환율로 5배 이상의 성능 증진이 나타났다. Pd/La2O3-TiO2 촉매는 활성금속인 Pd의 metal dispersion이 클수록 H2 산화반응에 유리한 것으로 분석되었다. 하지만 첨가되는 La2O3가 10%를 초과하게 되면 촉매 성능이 다시 감소하는 것을 알 수 있었다. 마지막으로 Pd/La2O3-TiO2 촉매의 물성이 지배적인 영향을 미치는 것은 주입되는 H2가 0.3~0.5% 농도 조건까지이며, 1% 이상의 H2 농도부터는 물질전달이 촉매 반응속도를 지배하는 것으로 판단된다.

• 공업화학
• /
• 제25권3호
• /
• pp.300-306
• /
• 2014

본 연구에서는, HCHO를 상온에서 제거하기 위한 귀금속계열의 촉매 연구를 수행하였다. 제조된 촉매들은 XRD, FT-IR, CO-chemisorption을 이용하여 특성분석을 수행하였다. 그 결과, Pt와 Pd를 활성금속으로 하여 제조한 환원촉매가 상온조건에서 우수한 HCHO 산화 능력을 보였으며, 지지체의 경우 환원성지지체로 잘 알려진 $TiO_2$를 이용하여 촉매를 제조하였을 때 높은 반응활성을 나타냈다. 또한, 환원시간이 길어짐에 따라 활성금속의 응집현상으로 인해 반응활성의 저하를 나타내었으며 환원촉매의 경우 상온조건에서 HCHO 흡착 및 탈착 특성이 우수함을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.128.2-128.2
• /
• 2016

본 발표에서는 DFT를 사용하여 개미산으로부터 수소 생산용 Pd 기반 합금 촉매의 합리적 설계를 다룰 것이다. 특히, 합금 촉매 효과 [ligand (electronic) 및 strain effect)]가 어떻게 개미산으로부터 수소 생산의 반응성과 선택도에 영향을 미칠 수 있는지를 조사하였다. 이러한 결과는 높은 촉매 성능을 달성하기 위해서 다성분 촉매의 표면 활성을 타당하게 제어하는 것이 얼마는 중요한지를 보여준다 [J. Phys. Chem. C, 118, 22254-22560 (2014), J. Nanosci. and Nanotech., 15, 8233-8237 (2015), ACS Catalysis 6 (1), 134-142 (2016)].

• 한국물환경학회지
• /
• 제34권6호
• /
• pp.621-631
• /
• 2018

In this study, catalyst was made through incipient wetness method using palladium (Pd) as noble metal, indium (In) as secondary metal, and montmorillonite (MK10) and Al pillared montmorillonite (Al-MK10) as supporters. The nitrate reduction rate of the catalysts was measured by batch experiments where H2 gas was used as reducing agent and formic acid as pH controller. Transmission electron microscopy (TEM) equipped with energy dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) were all used to determine the elemental distribution of Pd, In, Al, and Si on catalysts. It was observed that Al pillaring increased the Al/Si elemental composition ratio and point of zero charge of MK10, but decreased its BET specific surface area and pore volume. The nitrate reduction rate of Al-MK10 Pd/In was 2.0 ~ 2.5 times higher than that of MK10 Pd/In using artificial groundwater (GW) in ambient temperature and pressure. Nitrate reduction rates in GW were 1.2 ~ 1.7 times lower than those in distilled deionized water (DDW). Nitrate reduction rates in acidic conditions were higher than those in neutral condition in both GW and DDW. The amount of produced NH3-N over degraded NO3- at acid conditions was lower than that of neutral condition. Even though the leaching of Pd after reaction was measured in DDW it was not detected when both Al-MK10 Pd/In and MK10 Pd/In were used in GW. The modification of montmorillonite as a supporter significantly increased the reductive catalytic activities of nitrates. However, the ratio of producing ammonia by-products to degraded nitrates in ambient temperature and pressure was similar.