• Journal of the Korea Concrete Institute
• /
• v.11 no.3
• /
• pp.141-152
• /
• 1999

Precast prestressed double-tee slab may be designed by the PCI Design Handbook. It is based on the bridge construction and is required for reorganization for the use of buildings in the domestic construction environments. Much enhanced sections are developed from the reforming process on the determined design factors in the previous experimental works on double tees. Pre-determined shape, reinforcement detail, and 5000 psi concrete strength can not be expected as the best solution for the domestic construction requirements because large amount of use on that systems are anticipated. Flexural tests are performed on four full-scale 12.5m proto-type models, "least depth double tee", which are resulted from the optimization process. Domestic superimposed live load regulation, domestic material properties which is available to product, building design requirements and economy in construction are considered as the main factors to establish. the first two sections are double tee section for 1.2 ton/$\m^2$ market live load with straight and one-point depressed strands and the second two are for 0.6 ton/$\m^2$ parking live load with those strand types. All of the specimens tested fully comply with the flexural strength requirements as specified by ACI 318-95. However, the research has shown that following improved considerations are needed for better result in practice. The locations and method of connection for the lowest bottom mild bar, connection method between precast and cast-in-place concrete, and dap-end reinforcement are need to be improved.

• Steel and Composite Structures
• /
• v.24 no.2
• /
• pp.177-189
• /
• 2017

Hybrid-fiber reinforced concrete (HFRC) may provide much higher tensile and flexural strengths, tensile ductility, and flexural toughness than normal concrete (NC). HFRC slab has outstanding advantages for use as a composite bridge potential deck slab owing to higher tensile strength, ductility and crack resistance. However, there is little information on shear connector associated with HFRC slabs. To investigate the mechanical behavior of the stud shear connectors embedded in HFRC slab, 14 push-out tests (five batches) in HFRC and NC were conducted. It was found that the stud shear connector embedded in HFRC had a better ductility, higher stiffness and a slightly larger shear bearing capacity than those in NC. The experimentally obtained ultimate resistances of the stud shear connectors were also compared against the equations provided by GB50017 2003, ACI 318-112011, AISC 2011, AASHTO LRFD 2010, PCI 2004, and EN 1994-1-1 (2004), and an empirical equation to predict the ultimate shear connector resistance considering the effect of the HFRC slabs was proposed and validated by the experimental data. Curve fitting was performed to find fitting parameters for all tested specimens and idealized load-slip models were obtained for the specimens with HFRC slabs.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.1
• /
• pp.13-23
• /
• 2002

Hydrogenation properties of Mg-Ni and Mg-Ti-Ni alloys were investigated by Pressure-Composition Isotherm (PCI) test. Those alloys were fabricated by a new alloying method, Rotation-Cylinder Method (RCM). The as-cast microstructure of Mg-10 mass% Ni alloy consists of an island-like hydride forming $\alpha$-Mg phase and the eutectic structure. After 350 cyclic tests, Mg-lO mass % Ni alloy was pulverized into fine particles of 100 nm. The fine particles, which have a large specific surface area, are highly reactive with hydrogen. However, extreme pulvehzation can separate Mg from $Mg_2Ni$ in the eutectic structure, so $Mg_2Ni$ of the eutectic structure cannot behave as a dissociated hydrogen supplier.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.435-442
• /
• 2018

This study implemented an FPGA-based system to extract PCB defect patterns. The FPGA-based system can perform pattern matching at high speed for vision automation. An image processing library that is used to extract defect patterns was also implemented in IPs to optimize the system. The IPs implemented are Camera Link IP, Histogram IP, VGA IP, Horizontal Projection IP and Vertical Projection IP. In terms of hardware, the FPGA chip from the Vertex-5 of Xilinx was used to receive and handle images that are sent from a digital camera. This system uses MicroBlaze CPU. The image results are sent to PC and displayed on a 7inch TFT-LCD and monitor.

• Korean Journal of Adult Nursing
• /
• v.26 no.2
• /
• pp.203-213
• /
• 2014

Purpose: The purpose of this study was to understand and describe the every day life experience of patients with acute myocardial infarction (AMI) during the recovery period after Percutaneous Coronary Intervention (PCI) using a qualitative approach. Methods: Twelve patients with AMI participated in this study. Their age ranged from 42 to 75. The data were collected by individual in-depth interviews and all interviews were audio-taped and transcribed verbatim. The transcribed data were analyzed using traditional qualitative content analysis. Results: Six sub-themes emerged from the data as follows: Getting to know about illness, getting motivated for health behavior, putting an effort into health behavioral change, having difficulties maintaining health behavior, setting up coping strategies for health behavior and having a need for a tailored education. The results of this study showed how the health behaviors of patients with AMI are related to their every day life experiences. Conclusion: The results of this study could help health professionals to better understand patients with AMI and design effective educational interventions to improve their health behaviors.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.29.2-29.2
• /
• 2010

항법분야에 있어서 위성항법시스템의 다양한 오차를 제거한 정밀한 위치 정보를 이용하여 이동체에 활용하는 연구가 진행되고 있다. 실제 환경에서 이동체를 이용한 항법실험을 수행하기 전 실제 환경과 유사한 가상의 실시간 테스트베드를 구축하여 알고리즘 테스트 및 검증 실험을 수행하려 한다. 이를 위해 이동체의 운동을 시뮬레이션하는 운동궤적제어시스템과 실제의 항법신호를 시뮬레이션하는 GNSS 시뮬레이터 사이의 시각동기화는 실시간 시뮬레이션을 구현하기 위해 필수적으로 요구된다. 동기화 되지 않은 시각정보는 이동체 운동궤적제어시스템에 의해 생성된 실제의 궤적과 GNSS 시물레이터로부터 생성된 궤적사이의 오차를 유발하여 항법수신기의 부정확한 항법신호를 유발한다. 이 연구는 GNSS 시뮬레이터를 이용한 실시간 테스트베드의 구축에 있어 필요한 이동체 운동궤적의 시각동기화 기술 개발을 목표로 한다. GNSS 시뮬레이터는 Spirent 사의 GPS 시뮬레이터가 사용되었다. 이동체의 위치, 속도, 가속도와 같은 움직임을 나타내는 운동에 관한 명령은 적용되어야 하는 정확한 시각이 함께 전송되므로, 이는 그 시각 이전에 GPS 시뮬레이터에 도달해야 한다. 따라서 1초(1 Hz) 또는 0.1초(10 Hz) 사이에 원격제어시스템과 GPS 시뮬레이터사이의 시각 동기화를 구현하였다. 시뮬레이터와의 시각정보 동기화를 위해 Amplicon사의 PCI-215 타이머카드를 이용하였고, 그 결과, 이동체 운동궤적제어시스템과 시뮬레이터의 시각정보를 $10^{-3}$ 내의 위치오차를 가지는 정밀도로 동기화됨을 확인할 수 있었다.

• Communications for Statistical Applications and Methods
• /
• v.29 no.2
• /
• pp.177-191
• /
• 2022

This paper addresses the use of machine learning methods for causal estimation of treatment effects from observational data. Even though conducting randomized experimental trials is a gold standard to reveal potential causal relationships, observational study is another rich source for investigation of exposure effects, for example, in the research of comparative effectiveness and safety of treatments, where the causal effect can be identified if covariates contain all confounding variables. In this context, statistical regression models for the expected outcome and the probability of treatment are often imposed, which can be combined in a clever way to yield more efficient and robust causal estimators. Recently, targeted maximum likelihood estimation and causal random forest is proposed and extensively studied for the use of data-adaptive regression in estimation of causal inference parameters. Machine learning methods are a natural choice in these settings to improve the quality of the final estimate of the treatment effect. We explore how we can adapt the design and training of several machine learning algorithms for causal inference and study their finite-sample performance through simulation experiments under various scenarios. Application to the percutaneous coronary intervention (PCI) data shows that these adaptations can improve simple linear regression-based methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10B
• /
• pp.639-647
• /
• 2005

When a DEV associates with an existing WPAN, the PNC checks the capabilities of the new DEV to see if it is more capable to be the PNC of the piconet based on the criteria defined in the IEEE Std 802.15. If the new DEV is more capable and the current security policies allow it, then the PNC has the option of handing over control of the piconet to the DEV that has just joined. And, If the PNC is shutting down or wants to leave the WPAN, it also uses the handover process to give control to another DEV in the piconet. However, IEEE 802.15.3 checks only DEV capability information for more PNC capable. For PNC selection, it should consider the radio coverage of new PNC capable DEVs. So, we propose the method of PNC selection with accessibility check. This method manages PNC candidate list in the current piconet. In this paper, we analyze accessibility problems for PNC selection in section 2. In section 3, we explain CI(Configuration Inquiry) process which is proposed by Sony Corporation and propose PCI(PNC Candidate Inquiry) process. Also, we perform numerical analysis to compare PCI process with CI process in section 4. Finally, we conclude in section 5.

• Korean Journal of Food Science and Technology
• /
• v.42 no.5
• /
• pp.541-548
• /
• 2010

In this study, contamination levels of 7 N-nitrosamine were investigated in processed meat products (n=51), processed fish products (n=62), salted fish pickles (n=20), and beer and malt beverages (n=21) using a GC/PCI-MS/MS method. The limits of detection (LOD) of the N-nitrosamines ranged from 0.2 to 0.5 ${\mu}g$/kg. In addition, methods were used to estimate the recovery of 7 N-nitrosamines, which ranged from 84 to 112%. N-nitrosamines were detected in 89 (58%) out of 154 samples. The exposure of an entire population group to N-nitrosamines through food intake was estimated using the average body weight of the total population and average daily food consumption, to perform risk assessment based on reports of a national health and nutrition survey. The results indicated that the daily intake of N-nitrosamines over a life time was $4.92{\times}10^{-7}$ mg/kg b.w./day. The margin of exposure (MOE) for the general population, estimated using the benchmark dose lower confidence limit 10 ($BMDL_{10}$) of N-nitrosodimethylamine, was 208,939, which was found to be safe.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.569-572
• /
• 2005

This paper proposed the design and implementation of a DSP platform for the various multimedia streaming. The DSP platform synchronizes with host PC to configure DSP and to transmit multimedia streaming through PCI. The suggested DSP platform decodes high-capacity video/audio data using the suggested high-speed FIFO, CPLD and memory interface. The buffer control techniques is proposed in other to avoid the under/over-run of the audio/video data during the audio/video decoding. For the DSP platform test, host PC transmits program stream(PS) that consists of the MPEG-2 video MP@ML and 5.1ch AC3 audio data (Coyote.mov file, half hour running time) to DSP platform. The DSP platform plays continuously back the high sound-quality audio and high-definition video at once.