• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권8호
• /
• pp.492-499
• /
• 2003

This paper presents the analysis and the implementation of the asynchronous communication portion of the IEEE 802.11 MAC protocol. We have used PRISM2 chipsets from INTERSIL to build baseband, IF, and RF parts and PCI controller from PLX to interface LLC Layer. We have implemented DCF(Distributed Coordination Function) service using CSMA/CA(Carrier Sense Multiple Access with Collision Acoidance) with backoff algorithm and RTS/CTS protocol. Also, we have implemented TSF(Timing Synchronization Function) which can be used for power management frequency hop synchronization, and other management function. This study can be used as a reference for the MAC protocol implementation and MAC controller design in very high speed wireless LAN which complies with the IEEE 802.11 standard.

• 정보통신설비학회논문지
• /
• 제3권2호
• /
• pp.18-25
• /
• 2004

As using of network Increases rapidly, performance of system has been deteriorating because of the overhead and bottleneck. Nowadays, high speed I/O network standard, that is a sort of InfiniBand, PCI Express and so on, has come out to improve the limites of traditional I/O bus. The InfiniBand provides some protocols to service the applications such as SDP, SRP and IPoIB. In our paper, We explain the architecture of SDP(Socket Direct Protocol) and its features in channel based I/O network. And so, we provide a result of performance evaluation of SDP which is compared with current network protocol. Our experimental results also show that SDP is better than TCP/IP protocol.

• 한국보건간호학회지
• /
• 제31권2호
• /
• pp.272-283
• /
• 2017

Purpose: This descriptive study compared changes in life style and health perceptions before and after the onset of coronary heart disease in 100 patients. Methods: Data were from May to July in 2016 through questionnaires and medical records. The collected data were analyzed by a $x^2$ test, and paired t-test using SPSS 12.0. Results: After the onset of heart disease, significant decreases were observed in smoking ($x^2=17.21$, p<.001) and drinking ($x^2=43.56$, p<.001), while exercise increased significantly ($x^2=32.77$, p<.001). Appetite, stress and health state were significantly decreased after the onset of heart disease (t=3.18, p=.002, t=3.55, p=.001, t=4.43, p<.001), and knowledge about disease was significantly increased after the onset of heart disease (t=-13.66, p<.001). Conclusion: The results of this study indicate that continuous follow-up management programs including smoking and drinking cessation, exercise, appetite and stress management should be developed and implemented for Coronary Heart Disease with PCI.

• Nuclear Engineering and Technology
• /
• 제41권2호
• /
• pp.187-198
• /
• 2009

In this paper, three power ramp tests performed on high burn-up Re-crystallized Zircaloy2 - UO2 BWR fuel rods (56 to 63 MWd/kgU) within the SCIP project are simulated with METEOR and ALCYONE 3D. Two of the ramp tests are of staircase type up to Linear Heat Rates of 420 and 520 W/cm and with long holding periods. Failure of the 420 W/cm fuel rod was observed after 40 minutes. The third ramp test consisted of a more standard ramp test with a constant power rate of 80 W/cm/min up to 410 W/cm with a short holding time. The tests were first simulated with the METEOR 1D fuel rod code, which gave accurate results in terms of profilometry and fission gas releases. The behaviour of a fuel pellet fragment and of the cladding piece on top of it was then investigated with ALCYONE 3D. The size and the main characteristics of the ridges after base irradiation and power ramp testing were recovered. Finally, the failure criteria validated for PWR conditions and fuel rods with low-to-medium burn-ups were used to analyze the failure probability of the KKL rodlets during ramp testing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1131-1134
• /
• 2003

Unknown parameters of a nonlinear system were estimated using a signal compression method. The estimated parameters were natural frequency and tile damping coefficient. This study applied a algorithm using tile comparison of the cross-correlation coefficient between the impulse response from a model and it from the signal compression method. The impulse through linear element included in a nonlinear system could be obtained by the signal compression method. The unknown parameters of the linear element could be estimated by comparing the Bode plots of system's impulse response with them of model's response. In this study, a LSCM(LabVIEW-Signal-Compression-Method) was developed to identify a nonlinear system. The LSCM consisted of National Instrument's (NI) Data Acquisition (DAQ) Board (Model PCI-1200), a monitoring program using LabVIEW software package, DAQ Signal Accessory Board, and 2nd-order electric circuits. The designed electric circuits consisted of resistors, inductors and capacitors. To evaluate the performance of the LSCM, the response from model with known parameters is compared with the response from the real system using the monitoring program. The results from simulation of experiment showed that the developed LSCM provided a reliable estimation performance.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권2호
• /
• pp.133-138
• /
• 2002

In this paper, we propose an integrated GUI environment of parallel fuzzy inference system fur pattern classification of remote sensing data. In this, as 4 fuzzy variables in condition part and 104 fuzzy rules are used, a real time and parallel approach is required. For frost fuzzy computation, we use the scan line conversion algorithm to convert lines of each fuzzy linguistic term to the closest integer pixels. We design 4 fuzzy processor unit to be operated in parallel by using FPGA. As a GUI environment, PCI transmission, image data pre-processing, integer pixel mapping and fuzzy membership tuning are considered. This system can be used in a pattern classification system requiring a rapid inference time in a real-time.

• 한국도로학회논문집
• /
• 제13권2호
• /
• pp.31-39
• /
• 2011

국내 고속도로의 60% 이상이 시멘트 콘크리트 포장으로 건설되었으며, 그 중 공용년수가 20년이 넘어선 구간이 절반 이상에 달하고 있다. 노후화된 시멘트 콘크리트 포장의 보수 보강은 국내의 교통여건상 우회도로가 준비되기 어렵기 때문에 조기 교통개방이 요구되며 현재까지는 주로 아스팔트 덧씌우기가 사용되고 있다. 반면에 아스팔트 덧씌우기 포장은 조기 파손으로 인해 많은 유지보수비용이 지출됨과 동시에 도로사용자의 불편을 초래하고 있다. 최근 들어 노후화 된 시멘트 콘크리트 포장의 효율적인 보강공법으로 접착식 콘크리트 덧씌우기 공법에 대해서 적용을 시도하고 있다. 따라서 아스팔트 덧씌우기 포장과 접착식 콘크리트 덧씌우기 포장의 합리적인 선택에 대한 비교 분석을 위해 포장의 연도별 파손상태에 대한 다양한 data가 필요하다. 하지만, 국내에서는 아스팔트 덧씌우기 포장과 접착식 콘크리트 덧씌우기 포장의 공용 중 파손상태에 대한 자료가 체계적으로 구축되어있지 않다. 본 연구에서는 아스팔트 덧씌우기와 접착식 콘크리트 덧씌우기 공법이 적용된 구간의 파손에 대해 충분한 자료를 구축하고 있는 미국의 LTPP Data를 이용하여, 공용성에 대해서 평가하였다. 단, 아스팔트 덧씌우기와 접착식 콘크리트 덧씌우기 공법은 파손형태가 서로 상이함으로써, 상대적인 비교를 위해 각각의 구간에 대해 포장상태지수(PCI, Pavement Condition Index)를 Database화 하였으며, 아스팔트 덧씌우기 구간과 접착식 콘크리트 덧씌우기 구간의 수명에 대해서 비교 분석을 수행하였다.

• 대한임베디드공학회논문지
• /
• 제8권3호
• /
• pp.129-136
• /
• 2013

In this paper, a motion control system based on 2-axis gimbal system is designed and implemented to drive a high speed and precision. The proposed system consists of the RS-422 interface, 2-axis gimbal platform, servo control unit integrated with a high speed DSP chip-set, servo amplifier unit, potentiometer sensor unit, and resolver sensor unit. The servo control unit using the high speed DSP firmware is designed to get a fast response without an overshoot with step input and a RMS error of low probability with ramp input. The servo amplifier unit using a voltage control is designed to resolve the zero-crossing distortion for precise motion. To verify the performance and stability of the implemented system, experiments are performed through a measurement of the time and frequency domain response in a laboratory environment by using a PXI(PCI eXtentions for Instrumentation).

• 한국컴퓨터정보학회논문지
• /
• 제11권2호
• /
• pp.35-42
• /
• 2006

본 논문에서는 Parsec을 이용하여 병렬디지털신호처리용 분산공유메모리 다중처리시스템의 성능 분석을 위한 시뮬레이터를 구현한다. 이 시뮬레이터의 특징은 TMS320C6701 DSP 칩의 DMA 기능과 빠른 접근시간을 가진 지역메모리를 사용하는 시스템의 시뮬레이션에 적합하다는 것이다. 또한 시스템의 성능 매개변수 수정과 하드웨어 구성요소들에 대한 재구성이 쉽기 때문에 다양한 실행 환경에서 시스템의 성능을 분석할 수 있다. 시뮬레이션에서는 DSP 알고리즘에서 널리 사용하는 FET, 2D FET, Matrix Multiplication, Fir Filter를 사용하여 프로세서의 수 데이터 크기, 하드웨어 요소의 변화에 따른 실행 시간을 측정한다. 그리고 그 결과를 비교함으로써 본 논문에서 구현한 시뮬레이터의 성능을 검증한다.

• Journal of Radiation Protection and Research
• /
• 제42권1호
• /
• pp.69-76
• /
• 2017

Background: Time-resolved optically stimulated luminescence (TR-OSL) is a very useful method for calculating the lifetimes of crystalline quartz and feldspar. Materials and Methods: A compact TR-OSL system was developed, comprising a heater assembly manufactured using Kanthal wire, 2 powerful blue light-emitting diodes (LED, LXHL-PB02) for optical stimulation equipped with VIS liquid light guides, and a photomultiplier tube combined with an optical filter for luminescence detection. A pulse generated from the data acquisition board (NI PCI 6250) was used to initiate on/off signals in LED and TR-OSL measurements. Results and Discussion: The TR-OSL and background signals measured using this TR-OSL system using quartz samples were very similar to those reported in a previous study. Additionally, the lifetimes of the build-up and TR-OSL signals were calculated as $27.4{\pm}2.2{\mu}s$ and $30.3{\pm}0.6{\mu}s$, respectively, in good agreement with the findings of a previous study. Conclusion: It was concluded that the developed TR-OSL system was very reliable for TR-OSL signal measurements and lifetime calculations.