• Journal of the Korean Ceramic Society
• /
• v.38 no.4
• /
• pp.393-399
• /
• 2001

Pb(In$_{1}$2/Nb$_{1}$2/)O$_3$의 제조시 전구체로서 tetragonal pyrochlore(Pb$_3$Nb$_2$O$_{8}$)를 사용하였을 때, 페로브스카이트상의 상합성을 촉진시키고 유전특성을 향상시키기 위해 A(B$_1$,B$_2$) 구조에서 A자리에 해당하는 PbO와 B$_1$자리에 해당하는 In$_2$O$_3$를 각각 과량으로 첨가하여 900-110$0^{\circ}C$의 소결온도범위에서 상합성, 소결특성, 유전특성에 미치는 영향에 대해 고찰하였다. 과량으로 첨가된 PbO는 상합성 및 소결특성을 향상시킬 수 있어서 유전특성을 향상시킬 수 있었으나 과량으로 첨가된 In$_2$O$_3$에서는 그러한 결과를 얻을 수 없었다. 이러한 원인은 Pb$_3$Nb$_2$O$_{8}$을 전구체로 사용할 경우, PbO 공융액상이 페로브스카이트상 형성 직전까지 남아 있어서 활발한 PbO 휘발이 일어나는데, 과량으로 첨가된 PbO가 이를 효과적으로 보상하기 때문인 것으로 판단된다.

• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.123-128
• /
• 1998

Multilayer ceramic capacitors(MLCC) were prepared by laminating the layer of composition with dif-ferent Curie temperature to improve temperature coefficient in the Pb(Mg1/3Nb2/3)O3-PbTiO3 binary system. Green sheet was formed by tape casting using Pb(Mg1/3Nb2/3)O3-PbTiO3 and PbTiO3 synthesized with solid state reaction of PBO. Nb2O5 MgO and TiO2. Green sheet with electrode of 70Ag-30Pd was laminated under 300 kg/cm2 at 70$^{\circ}C$ and sintered at 1100$^{\circ}C$ for 2hr. Curie temperatues for MLCC with 10 layers of pure PMN and 0.9PMN-0.1PT were lowered to -22$^{\circ}C$ and 36$^{\circ}C$ respectively. MLCC with 7 layers of PMN and 3 layers of 0.9PMN-0.1PT showed nearly zero temperature coefficient of capacitance in the range of -20∼30$^{\circ}C$ and sum of dissipation factor of each layer.

• Electrical & Electronic Materials
• /
• v.4 no.3
• /
• pp.220-228
• /
• 1991

본 연구에서는 핫프레스법으로 제작된 0.05Pb(Sn$_{1}$2/Sb$_{1}$2/)O$_{3}$-0.60PbZrO$_{3}$-0.35PbTiO$_{3}$+x[wt%]MnO$_{2}$ 세라믹스에 대해 구조적, 전기적 특성 및 탄성 표면파 특성을 조사하였다. x가 0.4인 조성을 1150[.deg.C]에서 45분간 소성한 시편의 경우 탄성표명파의 전기 기계 결합 계수 k$_{s}$ $^{2}$가 2.8[%], 기계적 품질 계수 Q$_{m}$ 이 1976으로 탄성 표면파 소자용 기판으로서 응용 가능함을 보였다.

• Journal of the Korean Ceramic Society
• /
• v.22 no.4
• /
• pp.47-53
• /
• 1985

Various amount of $P_2O_5$ were added to $PbO-B_2O_3$ binary glass system to investigate its effect on the phase separation and physical properties of the glass. Experiments such as infrared spectroscopy scanning electron microscopy thermal expansion softening point and microhardnesses were done. Phase separation with $B_2O_3$ rich phase matrix and PbO rich phase droplet was observed for the glasses con-taining less than 10m/o of PbO while the opposite morphology of phase separation for the glasses containing more than 11m/o of PbO. By adding increasing amount of $P_2O_5$ their phase separation region was extended to the glass containing more than 20m/o of PbO. These effects can be interpreted in terms of the inoic field strength difference of each ions in the glasses. The abrupt changes of physical properties such as softening point thermal expansion and microhardness were observed for the glass with around 10m/o of PbO in this system. These changes are by the matrix composition change from TEX>$B_2O_3$ rich phase to PbO rich phase depending on PbO concentration.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.2
• /
• pp.152-164
• /
• 1995

$xPb(Fe_{1/2}Nb_{1/2})O_3 - (1 - x)Pb(Mg_{1/3}Nb_{2/3})O_3$ powders were synthesized by the molten salt synthesis method using the NaC!- KCI flux with 1 : 1 molar ratio, and their powders and dielectric properties were investigated. The synthesized powders showed less agglomerated shape with the average particle size of less than $2 \mu\textrm{m}$. The composition $x0.3Pb(Fe_{1/2}Nb_{1/2})O_3-0.7Pb(Mg_{1/3}Nb_{2/3})O_3$ could be sintered at $1000{\times}C$ and its dielectric constnat was over 11, 000.

• Resources Recycling
• /
• v.33 no.2
• /
• pp.54-61
• /
• 2024

When steel contaminated with Pb, produced by the decay of natural radionuclides, is remelted, Pb distributes among the metal, slag, and gas phases. In this study, 5 wt%Pb was added to Fe and melted with CaO-SiO₂-Al₂O₃-MgO slag to investigate Pb's distribution in the metal/slag/gas. As slag basicity ((wt%CaO)/(wt%SiO₂)) increased, Pb solubility in Fe slightly increased, while Pb in the slag tended to decrease. Consequently, the slag/metal distribution ratio of Pb decreased with increasing basicity. Thermodynamic calculations revealed that the slag/Fe phase distribution ratio of Pb remained very low irrespective of the activity coefficient of PbO in the slag, consistent with the experimental results. The calculated evaporation rate of Pb in Fe-Pb was approximately 22 times that of Fe; hence, most of the Pb evaporated into the gas phase.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.12
• /
• pp.647-655
• /
• 2016

Lead dioxide ($PbO_2$) is an electrode material that is effective for organic pollutant degradation based on hydroxyl radical ($^{\bullet}OH$) attack. Representative parameters for $PbO_2$ electrodeposition are summarized to current, temperature, reaction time, concentration of Pb(II) and electrolyte agent. In this study, $Ti/PbO_2$ electrodes were fabricated by electrodeposition method under controlled reaction time, current density, temperature, concentration of $HNO_3$ electrolyte. Effects of deposition parameters on $^{\bullet}OH$ evolution were investigated in terms of electrochemical bleaching of p-Nitrosodimethylaniline (RNO). As major results, the $^{\bullet}OH$ evolution was promoted at the $PbO_2$ that was deposited in longer reaction time (1-90 min), lower current density ($0.5-50mA/cm^2$), higher temperature ($5-65^{\circ}C$) and lower $HNO_3$ concentration (0.01-1.0 M). Especially, the $PbO_2$ which was deposited in 0.01 M of lowest $HNO_3$ concentration by applying $20mA/cm^2$ for above 10 min was most effective on $^{\bullet}OH$ evolution. The performance gap between $PbO_2$s that was best and worst in $^{\bullet}OH$ evolution was about 41%. Among the properties of $PbO_2$ related on $^{\bullet}OH$ evolution performance, conductivity of $Ti/PbO_2$ significantly influenced on $^{\bullet}OH$ evolution. The increase in conductivity promoted $^{\bullet}OH$ evolution. In addition, the increase in crystal size of $PbO_2$ interfered $^{\bullet}OH$ evolution at surface of some $PbO_2$ deposits.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.141-141
• /
• 1994

• Journal of the Korean Ceramic Society
• /
• v.31 no.12
• /
• pp.1443-1448
• /
• 1994

Pb(Mg1/3Nb2/3)O3-PbTiO3-BaTiO3 solid solution was formed by mixed-oxide method. The phase during formation was analysed by XRD and formation mechanism was investigated. While heat-treating Pb(Mg1/3Nb2/3)O3 composition, the first, Pb2Nb2O7 and Pb3Nb2O8 pyrochlore phases are formed, and finally Pb(Mg1/3Nb2/3)O3 perovskite phase with containing Pb3Nb4O13 pyrochlore phase is obtained at 80$0^{\circ}C$. When Pb(Mg1/3Nb2/3)O3 composition is modified with PbTiO3 which have strong ionic bonding and high tolerance factor, the amount of pyrochlore phase is decreased by increasing of stability in perovskite structure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1989.06a
• /
• pp.74-76
• /
• 1989

x Pb($Sb_{1/2}Sn_{1/2}O_3-PbTiO_3-PbZrO_30.05{\leq}x{\leq}0.25$) ternary compound ceramics were fabricated by the mixed oxide method. The sintering temperature and time were 1200-1270[$^{\circ}C$], 2 hour, respectively. Increasing the PSS contents, the transition temperatures were decreased. The relative dielectric constant and Curie temperature of the 0.25 PSS-0.25 PT-0.5 PZ specimens were 450, 220[$^{\circ}C$]. The Pyroelectric coefficient of the 0.25PSS-0.25PT-0.50 PZ specimen was $5.20{\times}10^4$[C$\textrm{cm}^2$K].