• 한국전기전자재료학회논문지
• /
• 제19권5호
• /
• pp.417-421
• /
• 2006

In this study, in order to develop low temperature sintering piezoelectric ceramics for LTCC (Low-Temperature Cofired Ceramic) multilayer piezoelectric actuator, PMW-PMN-PZT ceramics using $0.2wt%\; Li_2CO_3$ and $0.25wt%\;CaCO_3$ as sintering aids were investigated according to the varation of PMW substution. Composition ceramics could be sintered at $900^{\circ}C$ by adding sintering aids. As the amount of PMW substitution increased, the crystal structure of PMW-PMN-PZT ceramics moved from tetragonal phase to rhombohedral phase gradually, and MPB(Morphotrophic Phase Boundary) region appeared at 2 mol% PMW substitution. At the sintering temperature of $900^{\circ}C$, the density, electromechanical coupling factor(kp), mechanical quality factor(Qm), dielectric constant(${\epsilon}r$), piezoelectric constant(d33) and Curie temperature(Tc) of 2 mol% PMW substituted PMW-PMN-PZT ceramics showed the optimal values of $7.88g/cm^3$, 0.58, 1002, 1264, 352 pC/N and $336^{\circ}C$, respectively, for LTCC multilayer piezoelectric actuator application.

• KSBB Journal
• /
• 제11권2호
• /
• pp.173-180
• /
• 1996

S. CereVlSWe를 이용하여 Pb 이온의 흡착 능력을 조사하였다. 살아있는 S. CereVlSWe 및 멸균된 S. cereVlswe 보다 건조분쇄 된 S. cerevisiae가 Pb 흡착 능력이 가장 좋았다. 통일의 중금속 농도에서 중금 속 단위 흡착량은 미생물 농도가 높아짐에 감소하였다. 살아있는 S. cereVlsiae의 흡착 능력 순서는 Pb > >Cu> Cd = Co>Cr > Zn = Ni순이었다. 중금속 흡 착에서 0.1 M NaOH로 24시간 전처리하여 흡착량을 1.5배 증가시킬 수 있었다. 0.1 M HCl 및 0.1 M $H_2S_O4$ 로 Pb이온을 효과적으로 탈착시킬 수 있었다. Pb 이온의 흡착평형은 Freundlich 흡착등온식과 Langmuir 흡착등온식으로 설명할 수 있었다.

• 한국결정학회지
• /
• 제8권2호
• /
• pp.97-104
• /
• 1997

수열합성법에 의한 Pb(TixZr1-x)O3분말 합성에 대하여 연구하였다. 합성원료로는 Lead-acetate trihydrate와 Titanium isoproprxide, Zirconium propoxide를 isopropanol로 희석시킨후 가수분해 시켜 얻은 Ti/Zr 젤을 사용하였고, 광화제로서 KOH(0.5m, 1m, 2m)를 사용하였으며 140℃, 150℃, 160℃의 반응온도에서 합성하였다. 합성된 Pb(TixZr1-x)O3분말은 입방체의 형태를 띄고 있었으며 응집된 형태로 나타났다. 1m과 2m의 KOH에서는 PZT 합성이 잘 이루어졌으며 1m의 경우 8시간, 2m의 경우 1시간 이상의 반응이 필요하였고 0.5m KOH에선 5일의 반응시간에도 순수한 PZT분말만이 합성되지 않았다. 낮은 반응온도와 짧은 반응시간의 실험조건에선 합성된 분말이 대부분 PZT분말이었으나 미반응 Ti/Zr 젤이 상당량 존재하였다. 합성된 PZT분말의 크기는 KOH농의 증가에 따라 증가하였다. 중간생성물로서 PbO고용체가 생성되었으며 이는 Ti고용량이 10% 정도의 큰것과 3%정도의 작은 것으로 크게 나눌 수 있었다.

• 대한전기학회논문지
• /
• 제44권7호
• /
• pp.914-918
• /
• 1995

In this study, Pb(Zr$_{x}$ Ti$_{1-x}$ )O$_{3}$ (x=0.65, 0.52, 0.35) thin films were fabricated by Sol-Gel method. A stock solution with excess Pb 10[mol%] of Pb(Zr$_{x}$ Ti$_{1-x}$ )O$_{3}$ was made and spin-coated on the Pt/SiO$_{2}$/Si substrate at 4000[rpm] for 30[sec.]. Coated specimens were dried on the hot-plate at 400[.deg. C] for 10[min.]. Sintering temperature and time were 500~800[.deg. C] and 1~60[min.]. The coating process was repeated 6 times and the final thickness of the thin films were about 4800[A]. To investigate crystallization condition, PZT thin films were analyzed with sintering temperature, time and composition by the XRD. The microstructure of thin fulms were investigated by SEM. The ferroelectric perovskite phases precipitated under the sintering of 700[.deg. C] for 1 hours. In the PZT(52/48) composition, dielectric constant and dielectric loss were 2133, 2.2[%] at room temperature, respectively.ively.

• Transactions on Electrical and Electronic Materials
• /
• 제9권3호
• /
• pp.91-95
• /
• 2008

In this study, in order to develop the composition ceramics for low loss multilayer piezoelectric actuator application, $Pb(Zn_{1/2}W_{1/2})O_3-Pb(Mn_{1/3}Nb_{2/3})O_3-Pb(Zr,Ti)O_3$ (abbreviated as PZW-PMN-PZT)ceramics according to the amount of $MnO_2$ addition were fabricated using two-stage calcinations method. And also, their dielectric and piezoelectric properties were investigated. At the 0.2 wt% $MnO_2$ added PZW-PMN-PZT ceramics sintered at $930^{\circ}C$, density, electromechanical coupling factor $k_p$, dielectric constant ${\varepsilon}_r$, piezoelectric $d_{33}$ constant and mechanical quality factor $Q_m$ showed the optimum value of $7.84g/cm^3$, 0.543, 1,392, 318.7 pC/N, 1,536, respectively for low loss multilayer ceramics actuator application.

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.873-877
• /
• 2007

In order to apply a complex multilayer chip LC filter, this study has estimated the interfacial reaction and coupling properties of dielectric materials $Pb(Fe_{1/2}Nb_{1/2})O_3$ and Ni-Zn-Cu ferrite materials through low-temperature co-sintering (LTCS). PFN powders were fabricated using double calcinated at $700^{\circ}C$ and then $850^{\circ}C$. While the perovskite phase rate was found to be 91 %, after heat treatment at $900^{\circ}C$ for 6h, the perovskite phase rate and density exhibited a value of 100 % and 7.46$g/cm^3$, respectively. The PFN/Ni-Zn-Cu ferrite, PFN/CUO (or $Pb_2Fe_2O_5$) and ferrite/CuO (or $Pb_2Fe_2O_5$) were mechanically coupled through interfacial reactions after the specimen was co-sintered at $900^{\circ}C$ for 6 h. No intermediate layer exists for the mutual coupling reaction. This result indicates the possibility of low-temperature co-sintering without any interfacial reaction layer for a multilayer chip LC filter.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2004년도 제20회 발표논문집
• /
• pp.72-74
• /
• 2004

The color change of lead-containing pigments is one of the most serious diseases in watercolor, oil paintings and wall paintings. These pigments have a tendency to darken or brighten. It was proved that oxidation of lead containing pigments in the formation of brown-colored lead dioxide is a photochemical reaction under high humidity conditions. Therefore, we carried out some analogic experiments on the color change of three typical lead containing pigments ; $Pb_3O_4$, Pbo and $PbCo_3{\cdot}Pb(OH)_2$ at the conditions of illuminations under the high humidity ($2PbCo_3{\cdot}Pb(OH)_2$ R. H.). The reason for the chemical reactions are discussed and the results of these experiments are shown in some spectrograms, micrographs and X-ray micro-diffraction patterns. Important conclusions were drawn in our research. Due to the formation of brown $PbO_2$, red lead $(Pb_3O_4)$ and massicot (PbO) turned brown or dark when they were illuminated light under high humidity. We noticed that the brightening of red lead occurred d to admixture with chalk or lead white in egg yolk or linseed oil medium on exposure to light. Lead white used in oil paintings turned yellowish on dark.

• 한국세라믹학회지
• /
• 제28권7호
• /
• pp.525-530
• /
• 1991

The effects of 0.15mol% Y2O3 doped semiconducting (Ba1-xPbx)TiO3 ceramics with 0.5 mol% Pb5Ge3O11 as sintering additives have been investigated as function of Pb contents (from 0.05 mol to 0.3 mol) and sintering temperatures (from 1050$^{\circ}C$ to 1200$^{\circ}C$). As the Pb content increases in the (Ba1-xPbx)TiO3 system, the size and resistance of the grain increase but the capacitance of the grain boundary decreases due to the formation of liquid phase during the sintering. And with increasing the sintering temperatures, the resistance of the grain decreases but the capacitance of the grain boundary increases. The PTCR effects decrease with increasing the Pb content and the sintering temperature.

• 한국전기전자재료학회논문지
• /
• 제19권1호
• /
• pp.35-39
• /
• 2006

In this study, in order to develop the multilayer piezoelectric actuator and ultrasonic resonator, PMN-PNN-PZT ceramics were fabricated by sintering with $Li_2CO_3-Na_2CO_3$ as sintering aids at $950^{\circ}C$ and their piezoelectric and dielectric characteristics were investigated as a function of PNN substitution. With increasing PNN substitution, dielectric constant(${\epsilon}_r$), electromechanical coupling factor(kp), and piezoelectric d constant($d_{33}$) were increased to $12 mol\%$ PNN substitution and then showed a tendency to decrease rapidly With increasing PNN substitution, crystal structure changed from tetragonal to rhombohedral at $12 mol\%$ PNN substitution and then secondary phase was appeared and its intensity was increased. At the $12 mol\%$ PNN substituted PMN-PZT composition ceramic sintered at $950^{\circ}C$, density, kp, $d_{33}$ and Qm showed the optimum value of $7.79 g/cm^3$, 0.599, 419 pC/N, and 894, respectively for multilayer piezoelectric actuator application.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.329-332
• /
• 1989

Lead titanate thin films were deposited on titanium substrates by a chemical vapour deposition(CVD) process involving the application of vapour mixtures of Pb, ethyl titanate( Ti($C_2H_5O_4$)), and oxygen. The lead titanate having a stoichiometric composition has a dc conductivity of $3.2{\times}10^{-12}{\Omega}^{-1}{\cdot}cm^{-1}$ at room temperature. The nonsaturating loops observed in present investigation may be attributed to the $TiO_2$ and TiO layers between the conductive substrate and the $PbTiO_3$ ferroelectric film. The ferroelectric properties of the stoichiometric $PbTiO_3$ film included a remanent polarization of 14.1 ${\mu}C/cm^2$ and a coercive field of 20.16 kV/cm.