• 제목/요약/키워드: Pb$PbO_2$

검색결과 2,067건 처리시간 0.03초

Effect of Phosphoric Acid on the Electronic and Diffusion Properties of the Anodic Passive Layer Formed on Pb-1.7%Sb Grid of Lead-acid Batteries

  • El-Rahman, H.A. Abd;Salih, S.A.;El-Wahab, A.M. Abd
    • Journal of Electrochemical Science and Technology
    • /
    • 제2권2호
    • /
    • pp.76-84
    • /
    • 2011
  • Potentiostatic oxidation of Pb-1.7%Sb alloy used in the manufacture of grids of lead-acid batteries over the potential range from -1.0V to 2.3V in 5M $H_2SO_4$ in the absence and the presence of 0.4M $H_3PO_4$ and the self-discharge characteristics of the oxide layer formed is studied by electrochemical impedance spectroscopy (EIS). Depending on the potential value, sharp variations in resistance and capacitance of the alloy are recorded during the oxidation and they can be used for identification of the various substances involved in passive layer. Addition of $H_3PO_4$ is found to deteriorate the insulating properties of the passive layer by the retardation of the formation of $PbSO_4$. $H_3PO_4$ completely inhibits the current and impedance fluctuations recorded in $H_3PO_4$-free solutions in the potential range 0.5 V-1.7 V. These fluctuations are attributed to the occurrence of competitive redox processes that involve the formation of $PbSO_4$, $PbOSO_4$, PbO and $PbO_2$ and the repeated formation and breakdown of the passive layer. Self-discharge experiments indicate that the amount of $PbO_2$ formed in the presence of $H_3PO_4$ is lesser than in the $H_3PO_4$-free solutions. The start of transformation of $PbSO_4$ into $PbO_2$ is greatly shortened. $H_3PO_4$ facilitates the diffusion process of soluble species through the passive layer ($PbSO_4$ and basic $PbSO_4$) but impedes the diffusion process through $PbO_2$.

Synthesis of $PbLaTiO_{3}$: Mn powders by hydrothermal method

  • Park, Sun-Min
    • 한국결정성장학회지
    • /
    • 제13권2호
    • /
    • pp.63-67
    • /
    • 2003
  • Synthesis of $PbLaTiO_{3}$ : Mn powders containing La and Mn was carried out using $PbO,\;TiO_{2},\;La_{2}O_{3}\;and\;MnO_{2}$ as starting materials by hydrothermal method. In the synthesis of single phase $PbLaTiO_{3}$ : Mn powder containing La and Mn, the optimal x value corresponding to La substitution was 0.01 which corresponds to $0.99(Pb_{1-x}La_{2x/3}TiO_{3})+0.01MnO_{2}$. The optimal conditions for the preparation of the powder synthesis were 8 M-KOH solvent of hydrothermal solvent, $270^{\circ}C$ of reaction temperature and 24 hrs of run time. It was found that the synthesized powders had spherical morphology with average particle size of 70 nm and specific surface area of $5.5\;m^{2}/g$.

$La_2$$O_3$$ Pb(Sn_{1/7}Nb_{4/7})O_3$-Pb(Zr,Ti)$O_3$전기 및 압전성질에 미치는 영향 (Effect of $La_2$$O_3$ on the electric and piezoelectric and properties of the system $ Pb(Sn_{1/7}Nb_{4/7})O_3$-Pb(Zr,Ti)$O_3$)

  • 최창규;조봉희;박창엽
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제1권2호
    • /
    • pp.162-167
    • /
    • 1988
  • 본 논문에서는 Pb(Sn$_{1}$7/Mn$_{2}$7/Nb$_{4}$7/)O$_{3}$- Pb(Zr, Ti)O$_{3}$계에 La$_{2}$O$_{3}$를 첨가하여 그양에 따른 압전일 전기력 성질의 변화를 고찰하였다. La$_{2}$O$_{3}$ 첨가량의 증가에 따라 유전상수, 압전 d상수, 유전손실, 비저항 등은 증가하였으나 경시 변화량은 오히려 감소하였다.

  • PDF

2.45 GHz 마이크로파장에서 무정형 재료로부터의 $PbTiO_3$결정 성장 (The crystal growth of amorphous materials in a 2.45 GHz microwave field)

  • 박성수
    • 한국결정성장학회지
    • /
    • 제8권2호
    • /
    • pp.255-262
    • /
    • 1998
  • 재래식 열원과 마이크로파 열원에 의해 열처리된 봉착용 무정형재료의 결정화 거동을 비교 검토하였다. X-선 회절분석과 SEM 분석의 결과로부터 마이크로파 열원에 의해 열처리된 시편은 짧은 열처리 시간과 낮은 열처리 온도에도 불구하고 재래식 열원에 의해 열처리된 시편에 비하여 $PbTiO_3$ 결정이 잘 성장하였고 높은 결정화도를 보여주었다. 마이크로파가 $PbTiO_3$ 결정의 핵 생성 단계에서는 핵 생성을 억제하지만,$PbTiO_3$결정의 핵 생성이 활발하여 임계 크기 이상으로 $PbTiO_3$결정이 성장하면 시편내의 이온들에게 향상된 확산 효과를 제공하여 $PbTiO_3$ 결정의 성장을 돕는다고 사료된다.

  • PDF

소결체 및 전극의 크기와 조성이 $Pb(Mn_{1/3}Nb_{2/3})O_3 PbTiO_3-PbZrO_3$계 압전세라믹스의 공진특성에 미치는 영향 (Effect of Composition Size of Sintered Body and Electrode on Resonant Characteristics of $Pb(Mn_{1/3}Nb_{2/3})O_3 PbTiO_3-PbZrO_3$ Piezoelectric Ceramics)

  • 류영대;조상희
    • 한국세라믹학회지
    • /
    • 제23권1호
    • /
    • pp.60-66
    • /
    • 1986
  • The effect of composition size of sintered body and electrode on resonant characteristics of the system $Pb(Mn_{1/3}Nb_{2/3})O_3 PbTiO_3-PbZrO_3$ has been decribed. Composition ranged from X=40 to X=55 diameter of sintered body ranged from D=6.5 to D=12.5(mm) and diameter of electrode ranged from De=5.5 to De=11 (mm) In the composition of morphotropic phase boundary antiresonant frequency (fa) dcreased slowly whereas resonant frequency (fr) decreased rapidly on the ground of this Δf(fa-fr) and electromechanical coupling fractor Kp increased and Qm showed low value. On the contrary in toward the composition of tetragonal and rhombo-hedral fa increased slowly whereas fr increased rapidly on the ground of this Δf and Kp decreased and Qm increased abruptly. Substance of the above statements have no concern with size of sintered body and ele-ctrode. The other side as the size of electrode decreased Qm fr, fa and Δf increased. Cm and Co dominantly affect the resonant frequency and antiresonant frequency.

  • PDF

화학증착법에 의한 $PbTiO_3$ 박막의 재료 (Fabrication of $PbTiO_3$ Thin Film by Chemical Vapor Deposition Technique)

  • 윤순길;김호기
    • 한국세라믹학회지
    • /
    • 제23권6호
    • /
    • pp.33-36
    • /
    • 1986
  • The $PbTiO_3$is well known materials having remarkable ferroelectric piezoelectric and pyro-electric properties. Thin films of the lead titanite has been successfully fabricated by Chemical Vapor Deposition on the borosilicate glass and titanium substrate. The $PbTiO_3$ thin film deposited on the borosilicate glass using the $PbCl_2$, $TiCl_4$ dry oxygen and wet oxygen at different temperatures (50$0^{\circ}C$-$700^{\circ}C$) grows along the (001) preferred orientation. On the other hand the $PbTiO_3$ thin film deposited on the titanium substrate using the PbO grows along the (101) preferred orientation. Growth orientation of deposited $PbTiO_3$ depends on the reaction species irrespective of substrate materials. Maximum dielectic constant and loss tangent of the $PbTiO_3$ thin film deposited on the titanium substrate are about 90 and 0.02 respectively, . Deposition rates of $PbTiO_3$ deposited on the borosilicate glass and titanium substrate are 10-15 ${\mu}{\textrm}{m}$/hr. Titanium dioxide interlayer formed be-tween $PbTiO_3$ film and titanium substrate material, It improved the adhesion of the film.

  • PDF

$RuO_2$ 및 Pt 기판에서 $PbTiO_3$박막의 화학기상 증착특성에 관한 연구 (Deposition Characteristics of Lead Titanate Films on $RuO_2$ and Pt Substrates Fabricated by Chemical Vapor Deposition)

  • 정수옥;이원종
    • 한국재료학회지
    • /
    • 제10권4호
    • /
    • pp.282-289
    • /
    • 2000
  • 전자싸이클로트론공명-플라즈마 화학기상증착법으로 $PbTiO_3$박막을 증착하였다. $RuO_2$ 기판과 Pt 기판 위에 금속유기화합물 원료기체 유량 및 증착온도에 따라서 $PbTiO_3$박막의 증착특성을 연구하였다. $RuO_2$ 기판 위에서 Pt 기판에 비하여 Pb-oxide 분자의 잔류시간이 상대적으로 크고, 페로브스카이트 핵생성 밀도는 상대적으로 작으며, 단일한 페로브스카이트 상의 $PbTiO_3$ 박막을 얻을 수 있는 공정범위가 Pt 기판보다 좁았다. $PbTiO_3$ 박막 증착 전 Ti-oxide 씨앗층을 도입함으로써 $RuO_2$ 기판에서도 페로브스카이트 핵생성 밀도를 증가시켜 단일한 페로브스카이트 박막을 얻을 수 있는 공정범위가 확장되었다. $PbTiO_3$에서 Ti 성분을 Zr으로 일부 대체시킨 $Pb(Zr,Ti)O_3\;(PZT)$ 박막의 경우에도 Ti-oxide 씨앗층을 도입함으로써 넓은 공정범위에서 단일한 페로브스카이트 PZT 박막을 $RuO_2$기판 위에서도 제조할 수 있었다.

  • PDF

Monohydrogen Arsenate 감응 전극 (The Monohydrogen Arsenate-sensing Electrodes)

  • 인권식;박일배
    • 대한화학회지
    • /
    • 제31권2호
    • /
    • pp.162-167
    • /
    • 1987
  • Monohydrogen arsenate를 전위차법으로 직접 정량하기 위하여 네가지 성분인 $Ag_2S$-PbS-$PbHAsO_4-Cu_2S$와 세가지 성분인 $Ag_2S$-PbS-$PbHAsO_4$로 된 전극이 제조되어 평가되었다. $Ag_2S$:PbS:$PbHAsO_4:Cu_2S$의 성분비(몰비)가 2.0:0.5:1.0:0.25인 전극이 전위차 감응, 안정도, 감응 속도와 재현성이 우수하였다. 0.1F $NH_4A_C-NH_4OH$ 완중용액 중의 일정한 이온 강도와 pH 8.50으로 조정된 $10^{-1}$~$10^{-4}M\;HA_SO_4^{2-}$ 농도 범위에서 실험하였고, $CN^-,\;I^-,\;S^{-2}$$Cl^-$등이 방해하였다.

  • PDF