• 한국도로학회논문집
• /
• 제17권6호
• /
• pp.19-26
• /
• 2015

PURPOSES : This study intends to develop an inorganic soil pavement material using industrial by-products and to evaluate its applicability as a road pavement material. METHODS : In this study, a compressive strength experiment was conducted based on the NaOH solution molarity and water glass content to understand the strength properties of the soil pavement material according to the mixing ratio of alkali activator. In addition, the strength characteristic of the inorganic soil pavement material was analyzed based on the binder content. The performance of the soil pavement was evaluated by conducing an accelerated pavement test and a falling weight deflectometer (FWD) test. RESULTS : As a result of the soil pavement material test based on the mixture ratio of alkali activator, it was identified that the activator that mixed a 10 M NaOH solution to water glass in a 5:5 ratio is appropriate. As a result of the inorganic soil pavement materials test based on the binder content, the strength development increased sharply when the amount of added binder was over 300 kg; this level of binder content satisfied 28 days of 18 MPa of compression strength, which is the standard for existing soil pavement design. According to the measured results of the FWD test, the dynamic k-value did not show a significant difference before or after the accelerated pavement testing. Furthermore, the effective modulus decreased by approximately 50%, compared with the initial effective modulus for pedestrian pavement. CONCLUSIONS : Based on these results, inorganic soil pavement can be applied by changing the mixture proportions according to the use of the pavement, and can be utilized as road pavement from light load roads to access roads.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1164-1171
• /
• 2010

Korea is considered to be a seasonal frozen soil area that is thawed in the spring, and most of the area is frozen in winter as to the characteristic of geography. In the current design codes for anti-freezing layer, the thickness of anti freezing layer is calculated by freezing depth against the temperature condition. Therefore, they have a tendency of over-design and uniform thickness without the considerations of thermal stability, bearing capacity and frost susceptibility of materials. So, it is essential for studying the appropriateness and bearing capacity besides the seasonal and mechanical properties of pavement materials to take a appropriate and reasonable design of the road structure. In this research, the evaluation of frost susceptibility on subgrade, ant-freezing layer, sub base was conducted by means of the mechanical property test and laboratory field road model downed scale experiment. The temperature, heaving amount, heaving pressure and unfrozen water contents of soil samples, the subgrade, anti-freezing layer, sub base soils of highway construction site, were measured to determine the frost susceptibility.

• 한국도로학회논문집
• /
• 제16권4호
• /
• pp.11-19
• /
• 2014

PURPOSES: This study is to suggest the improvement for bus rapid transit system in Seoul METHODS: The maintenance cost for bus lane damages and plastic deformations are increased by bus passing speed, heavy bus weight, and climate change (localized torrential downpour, subtropical climate) and the accident risk has been increased. RESULTS: Recent analysis of pavement damage indicates that bus lane damage caused by heavy weight is overwhelming and it is urgent to prepare countermeasures. CONCLUSIONS : Pavement data of bus rapid transit system, bus transit numbers and pavement damage elements were analyzed. By analyzing pavement maintenance, design and construction, the countermeasures for the improvement of bus lane pavement and effective maintenance were suggested.

• 농촌계획
• /
• 제14권1호
• /
• pp.1-7
• /
• 2008

Recently, brick pavement were widely introduced on the pavement in rural area. A variety of vision effects can be created from patterns of brick pavement. However, in most of brick pavement works, human psychological characteristics were not concerned. The purpose of this research was to discover psychological effect on brick pavement pattern. The results of the research can be summarized as follows: 1)Psychological impression on brick pavement pattern is similar among man and woman groups. 2)Stack bond and running bond pattern have a simple, relaxed, organized, and comfortable psychological characteristics. Basket weave & stack bond pattern has a simple and organized psychological characteristic. Herringbone bond pattern has a complex, dislike and uncomfortable psychological characteristic. Pinwheel bond pattern has a highly complex psychological characteristic. Basket weave and Basket weave variation bond pattern have a common psychological characteristic. 3)Employment of brick pavement pattern on this research is not highly preferred, hence it is necessary to develop a brick pavement patterns that have human psychological characteristics be concerned.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.79-89
• /
• 2008

포장 공용성 모델은 역학적-경험적 포장설계법에서 포장의 수명을 결정하기 위한 가장 중요한 인자이다. 한국 포장연구 프로그램의 일환으로 한국형 포장설계법이 역학적-경험적 방법에 근거하여 현재 개발중에 있다. 본 연구에서는 포장 공용성모델중 아스팔트 혼합물의 영구변형 예측모델을 삼축압축 반복재하시험을 이용하여 개발하였다. 본 시험은 다양한 아스팔트 혼합물에 대하여 온도와 공극률을 변화시켜 하중재하 횟수에 따른 혼합물의 영구변형 특성을 조사하였으며, 본 시험결과를 이용하여 예측모델의 계수값을 결정하였다. 영구변형 예측모델의 계수값은 포장가속시험결과를 토대로 다양한 혼합물에 대한 시험결과를 이용하여 깊이에 따른 전단응력의 변화를 고려한 통합적인 소성변형 모델계수값을 정하는 것보다 혼합물의 종류에 따른 모델계수를 산정하는 것이 보다 정확한 결과를 예측할 것으로 판단된다.

• 한국도로학회논문집
• /
• 제2권2호
• /
• pp.139-148
• /
• 2000

외국의 포장가속시험기는 대부분 아스팔트포장의 시험을 주된 목적으로 개발되었다. 그러나, 국내의 고속도로는 콘크리트포장과 아스팔트포장이 거의 같은 연장을 유지하고 있는 실정으로 콘크리트포장의 활용이 예상되어 콘크리트 포장의 시험을 위한 독자적인 포장가속시험시설의 개발이 요구되고 있다. 따라서 한국의 실정에 알맞은 콘크리트/아스팔트포장 '시험용 포장가속 시험시설'을 개발하기 위하여 1997년부터 1999년 동안의 3년간 연구를 수행하였다. 1차 연도에서는 포장가속시험시설을 제작하는데 필요한 기본적인 사양과 기본 시스템 설계에 관한 기초연구가 이루어 졌고, 2$\sim$3차 년도에는 KALES의 전체구조, 하중작용, 현가장치 및 구동장치 등에 대한 상세설계를 수행하였다. 실모델을 제작하기 전단계로 모형시험기를 만들어 시험을 수행하여 작동성 및 하중분배기구 등을 검토하였다. 피로해석 검토결과 제안된 KALES 시스템은 내구성이 있으며 실제차량을 잘 모사할 수 있는 시험기로 판명되었다.

• 토지주택연구
• /
• 제10권4호
• /
• pp.51-59
• /
• 2019

The government is encouraging the notice of obligatory reclaimed asphalt as a result of the economic and social positioning of green growth to reduce the amount of waste resources and to solve natural resource problems by recycling continuously generated waste resources. However, it is necessary to develop application guideline for each application to apply reclaimed asphalt to the site because quality control of the reclaimed asphalt is difficult and the specifications are ambiguous as well. Therefore, in this study, the mix design, quality test, performance test, and finite element analysis about reclaimed Asphalt Pavement were conducted to develop application guideline for reclaimed hot asphalt. The mix design was carried out for the comparative general hot mix asphalt mixture, the reclaimed hot mix asphalt mixture using the additive, and the reclaimed hot mix asphalt mixture without the additive. Indirect tensile strength and tensile strength ratio tests were used to characterize the reclaimed hot mix asphalt mixture. Using the results of dynamic modulus test and FWD test for KPRP analysis and finite element analysis, the performance life was evaluated for general pavement and pavement using recycled aggregate. Finally, the life cycle cost analysis was used to compare and analyze the economics of reclaimed asphalt concrete pavement.

• 한국조경학회지
• /
• 제32권5호
• /
• pp.43-51
• /
• 2004

Recently, the importance of choosing correct pavement materials has been increasing in urban spaces and streets. Much research regarding the pavement theory and construction method have been conducted, but analysis in terms of human psychological character has not yet been performed. The purpose of this study is to investigate the psychological characters to 12 pavement materials, that are commonly used in our urban spaces and streets. The results of the psychological character for each pavement material can be summarized as follows: 1. The psychological characters to each pavement material were as follows: ① Clay embodies a natural, traditional, soft and intimate psychological character; ② Pebble stone has a natural, hard, cool and intimate psychological character; ③ Turf grass incorporates an intimate and soft psychological character; ④ Ceramic brick has an artificial and hard psychological character; ⑤ Tile pavement has a modern, artificial, hard and cool psychological character; ⑥ Water permeable concrete has a modern and artificial psychological character; ⑦ Flag stone has a natural psychological character; ⑧ Granite has a modern and artificial psychological character; ⑨ Portland concrete has an artificial and hard psychological character; ⑩ Small compacted brick has an artificial, dynamic and modern psychological character; ⑪ Wood block pavement has a natural and traditional psychological character; ⑫ Asphalt concrete pavement has a modern, hard and artificial character. 2. On the results of the cluster analysis regarding psychological indexes for 12 pavement materials, pavement materials were categorized in 3 clusters. Among them, one cluster was mainly used as the most popular pavement material in our urban spaces and streets. From this point of view, psychological character for pavement material in our urban spaces and streets was not as various as we expected. 3. In conclusion, the proper selection of pavement materials was very important and the factors affecting the human psychological character should be considered in the design of urban spaces and streets.

• 한국지반환경공학회 논문집
• /
• 제3권1호
• /
• pp.57-66
• /
• 2002

도로포장설계시 일반적으로 동상방지층을 노상층에 포함시키지 않고 단지 노상층의 CBR을 산정하여 그 강도에 적합한 도로포장구조를 결정하고 있다. 그러나, 현재 추세는 동상방지층을 노상층에 포함시켜 포장구조를 설계하고 있다. 동상방지층을 포함한 노상층의 평균 CBR을 사용하는 경우 노상층만의 CBR에 비해 상대적으로 큰 강도를 나타내므로 포장구조 두께는 감소한다. 그러나, 동상방지층을 포함한 노상층의 평균 CBR 산정식이 별도로 규정되어 있지 않으므로 CBR 결정에 많은 혼선을 가져오고 있다. 따라서, 본 연구에서는 동상방지층을 포함한 노상층의 평균 CBR을 산정하기 위하여 실내 및 현장 CBR 시험을 실시하였다. 실험결과를 근거로 노상층의 평균 CBR 산정에 편리한 수정식을 제안하였다. 또한, 노상층만의 CBR을 사용한 포장설계시와 동상방지층을 포함한 노상층의 평균 CBR을 사용한 포장설계시 포장두께를 비교하여 경제성을 검토하였다.

• 한국산학기술학회논문지
• /
• 제12권9호
• /
• pp.4199-4204
• /
• 2011

아스팔트 혼합물의 동탄성계수는 포장체의 내구성 및 공용성을 평가하는데 매우 중요한 지표이다. 최근 미국의 AASHTO 2002 설계법 및 한국형 포장설계법에서도 아스팔트 포장체의 가장 중요한 물성중 하나를 동탄성계수로 정의하였고, 이를 아스팔트 포장의 설계 및 해석에 적극 이용하고 있다. 동탄성계수를 설계에 이용하기 위해서는 마스터곡선을 작성하여야 한다. 마스터곡선은 각각의 아스팔트 혼합물을 이용하여 평가된 동탄성계수 값을 이용하여 결정한다. 마스터곡선을 결정하는 방법은 표준화되어 있으나, 저온영역(-10도)에서는 시험장비 계측장비의 결로로 인한 측정오차 및 고온영역(55도)에서는 아스팔트 바인더의 유체화 및 실험기기 세팅상의 문제들이 발생하여 측정 결과값에 큰 영향을 준다. 따라서, 이러한 온도대역의 자료를 제외한, 5도, 21도 및 40도에서 측정된 결과값을 이용하여 마스터곡선을 작성 및 분석하였고, 이를 기존의 표준방법으로 결정한 마스터곡선과 비교하였다. 본 연구에서 제안된 방법을 이용하여 결정된 마스터곡선은 고온영역에서 차이가 있기는 하지만, 충분히 사용가능한 것으로 판단되었다.