• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.1
• /
• pp.37-43
• /
• 1999

Ocular lens failure can be verified by measuring the elastic wave velocity diffraction patterns of monochromatic wave applied with elastic wave were detected using optical heterodyne method. The elastic wave velocity was measured by analysing the diffraction patterns. According to measured results of the longitudinal elastic wave velocity of the middle index-refraction and high index-refraction lens are 6588.5575 m/s and 3973.53 m/s, respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.6 s.154
• /
• pp.961-970
• /
• 2006

This study attempted to understand post-purchase consumer return experiences which had not received much attention in consumer behavior research. As a first step to understand return experiences from consumers' viewpoint, the study took an exploratory approach and identified themes and patterns from subjective consumer experiences. Whenever possible, attribution theory was applied to interpret the identified patterns. A total of 99 cases were collected from an open-ended questionnaire and analyzed based on a qualitative method. The reasons of product return was classified into five groups: changing mind; product defects; unsuitable products; products not expected; and for a better deal. External attribution was observed for return decisions caused by consumers' changed mind as well as by product defects. Dissatisfaction with defected products seemed to be intensified or reduced by service failure or success in the post-purchase service encounter. Consumer expectation and situations seemed to affect this process. Overall, the study supported attribution theory in the post-purchase return experience, and insights for research questions were proposed.

• Journal of Family Resource Management and Policy Review
• /
• v.12 no.4
• /
• pp.15-33
• /
• 2008

The purpose of this ethnography is to describe and analyze the employment and substitutional use of daily help for the household work. Ten housewives and one educator of daily help from Gwangju City were interviewed with an unstructured questionnaire. They experience many difficulties from this daily help employment and use, even though they gain some basic help from their service. The diversity of the routes to seek out this daily help means that there is no proper route. And the daily help's sudden quit causes many realistic and psychological problems. Frequent disagreement between the user's demand and help's implement comes from communication failure. Three different management patterns of daily help were issued ; 'conservative-dominant', 'rational-mandatory', 'powerless-dependent'.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.209-212
• /
• 2002

As the mask design rules get smaller, the probability of the process failure becomes higher doc to the narrow overlay margin between the contact and metal interconnect layers. To obtain the minimum process margin, a tabbing and cutting method Is applied with the rule based optical\ulcorner proximity correction to the metal layer, so that the protection to bridge problems caused by the insufficient space margin between the metal layers can be accomplished. The side-lobe phenomenon from the attenuated phase shift mask with the tight design rule is analyzed through the aerial image simulation for test patterns with variation of the process parameters such as numerical aperture, transmission rate, and partial coherence. The corrected patterns are finally generated by the rules extracted from the side-lobe simulation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.18-21
• /
• 2002

As the mask design rules get smaller, the probability of the process failure becomes higher due to the narrow overlay margin between the contact and metal interconnect layers. To obtain the minimum process margin, a tabbing and cutting method is applied with the rule based optical proximity correction to the metal layer, so that the protection to bridge problems caused by the insufficient space margin between the metal layers can be accomplished. The side-lobe phenomenon from the attenuated phase shift mask with the tight design nile is analyzed through the aerial image simulation for test patterns with variation of the process parameters such as numerical aperture, transmission rate, and partial coherence. The corrected patterns are finally generated by the rules extracted from the side-lobe simulation.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.941-943
• /
• 1998

Exploitation of equipment with cross linked polyethylene (XLPE) insulation requires its condition monitoring and diagnostic. Traditionally diagnostics of insulation is carried out by means of partial discharge detection. Many researchers have developed a lot of methods to identify the defect by the PD form. However, such identification of a defect, for example, void, inclusion or treeing, does not say about its danger from a point of view of full insulation gap breakdown and insulation construction failure. The information about the form and size of formed upon high voltage treeing is necessary for prediction of the remained resource of XLPE insulation. For this purpose we carry out experimental research for determination of the dependencies between PD characteristics in XLPE upon time and three dimension PD patterns of corresponding treeing. The investigations were carried out by means of electrical measurement of PD current and simultaneous optical recording of treeing image. Test results show that the PD patterns can be applied for detecting tree growth well.

• Structural Engineering and Mechanics
• /
• v.49 no.6
• /
• pp.775-792
• /
• 2014

Static loading tests were carried out in this study to investigate the effect of bar cutoff on the resistance of RC beam-column sub-assemblages under column loss. Two specimens were designed with continuous main reinforcement. Four others were designed with different types of bar cutoff in the mid-span and/or the beam-end regions. Compressive arch and tensile catenary responses of the specimens under gravitational loading were compared. Test results indicated that those specimens with approximately equal moment strength at the beam ends had similar peak loading resistance in the compressive arch phase but varied resistance degradation in the transition phase because of bar cutoff. The compressive bars terminated at one-third span could help to mitigate the degradation although they had minor contribution to the catenary action. Among those cutoff patterns, the K-type cutoff presented the best strength enhancement. It revealed that it is better to extend the steel bars beyond the mid-span before cutoff for the two-span beams bridging over a column vulnerable to sudden failure. For general cutoff patterns dominated by gravitational and seismic designs, they may be appropriately modified to minimize the influence of bar cutoff on the progressive collapse resistance.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.5
• /
• pp.525-531
• /
• 2004

In this paper, the concept of infrared thermography(IRT), the principle of measurement of IRT and how to set up the IR camera for the nondestructive testing are described in detail. Also, its utilization and non-destructive testing(NDT) diagnosis are reviewed. By performing the periodic non-touched WDT through the estimation of thermal patterns related with the temperature for the surface targeted, IRT can be applied to the early prevention of the device failure. For the diagnosis utilization, thermal imaging patterns obtained from IRT for heated blocks with internal defects were estimated through the lion-destructive method and discussed the way of IRT estimation from the analysis of characteristics between material defects and thermal imaging patterns.

• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.36-47
• /
• 2011

The main issue in the current software development is the development of a reusable and flexible software. Already many successful software development experiences have been proposed to extract patterns of common look, depending on the software environment or depending on the nature of the module you want to implement. Can develop the software quickly and accurately to select fit for the purpose of developing and reuse using experienced patterns. These developments are depending on the success and failure become a new experience and reuse again. Apply design pattern in software development is required, was not an option. In this paper, design and implement to a common framework applied design patterns for the development of reusable software using .NET Remoting in one of the technologies of distributed communication services.

• 대한두경부종양학회:학술대회논문집
• /
• 2007.11a
• /
• pp.206-206
• /
• 2007