• Journal of Korean Society of Forest Science
• /
• v.65 no.1
• /
• pp.48-53
• /
• 1984

Using the Duff and Noland's method, the annual ring growth patterns of the red pine in the natural stands were examined at two locations; Seocheon, Chungnam-do where the stand had been infested with the pine needle gall midge, Thecodiplosis japonensis, during the years from 1975 to 1978, and Hongsong, Chungnam-do where had been no incidence of the insect damage. The results obtained are as follows: 1) With the normal red pine of 13 year old, the growth pattern in the oblique sequence indicates that the annual growth rates are maximum at the few terminal internodes, and decrease gradually with the downward internodes. Such characteristic of the growth pattern is not clear in the horizontal sequence of annual rings. 2) The indications of the radial growth reduction of the pine tree due to the pine gall midge infestation could be examined with any of three series at the crown level internodes; horizontal, vertical and oblique series. For the basal internodes, however, the horizontal series appeared to be inadequate for the analysis of the damage impact because it seemed to be masked by various factors other than direct effects of the damage. 3) Of the three ways of radial growth analyses, oblique sequence seems to be the most usefull, especially for the detection of the impact on growth caused by incipient or light infestation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.1
• /
• pp.11-18
• /
• 1996

Grown-in defects like OISF and FPD in the large diameter(> 8 inch)of silicon crystal are characterized. It was revealed that the presence of the ring-patterned OISF would deterorate the minority life time of the silicon crystal. Through the cooling experiment from the $1250^{\circ}C$, the nucleation of the OISF was confirmed to follow the homogeneous nucleation and growth process. In addition to OISF nucleus, crystal originated particle, which was known to be closely related with FPD (Flow Pattern Defects), was found to depend on the pulling rate of the crystal. Combination of the lower rate of the pulling and the faster cooling near the $950^{\circ}C$ is proposed to be effective method in reducing the generation of these grown-in defects.

• Journal of Korean Society of Forest Science
• /
• v.95 no.2
• /
• pp.155-159
• /
• 2006

An efficient method for in vitro propagation of the medicinal plant Hovenia duleis, was established. Plantlets for micropropagation of H. dulcis were obtained from in vitro germinated seeds. The effectiveness of various levels of cytokinins (BAP, Kinetin and TDZ) on multiple shoot formation from stem nodes was tested. BAP (1.0 mg/L) treatment induced highest number of multiple shoots. The growth pattern of plantlet on various culture media was undertaken. The shoot elongation was optimal on 2MS basal medium without growth regulators. The in vitro rooting ability of H. dulcis shoots was examined with two-auxins IAA and IBA. The IAA (1.0 mg/L) treatments induced earliest rooting with maximum number of roots and root growth. Rooted shoots were transferred directly to small pots with artificial soil and such established plant exhibited a normal growth pattern similar to wild plantlet.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.2
• /
• pp.50-57
• /
• 2004

Mercurous Bromide ($Hg_2Br_2$) crystals hold promise for many acousto-optic and opto-electronic applications. This material is prepared in closed ampoules by the physical vapor transport (PVT) growth method. We investigate the effects of solutal convection on the crystal growth rate in a horizontal configuration for diffusive-convection conditions and purely diffusion conditions achievable in a low gravity environment. Our results show that the growth rate is decreased by a factor of one-fourth with a ten reduction of gravitational acceleration near y = 2.0 cm. For 0.1 $g_O$ the growth rate pattern exhibits relatively flat which is intimately related to diffusion-dominated processes. The growth rate nonuniformity is regardless of aspect ratio across the interfacial positions from 0 to 1.5. Also, the effect of a factor of the ten reduction in the gravitational acceleration is same to both Ar = 5 and 2. The enlargement in the molecular weight of B from 50 to 500 by a factor 4 causes a decrease in the maximum growth rate by the same factor, indicative of the effect of solutal gradients.

• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.4
• /
• pp.115-124
• /
• 2011

This study examines the process of urban formation in the city of Yanji. The analysis is done by the change of street pattern and major facility location in a timely manner by appling space syntax method. This research categorizes the pattern of the urban growth focused on two urban forms, street and major buildings, in the city and is offered of the meaning of the first value on interpretation of the urban growth in the city of Yanji. The result of the research are as follows. First, the period of the city transformation is divided into four stage; intuitive period, grid-iron formative period, consolidation period, and urban expansion period. Second, characteristics of each stage have been analyzed. At the first stage, the city started to frame along both buildings and streets which were placed without a plan. At the second stage, the city was planned and constructed into new grid-iron pattern ignoring existing context by Jananese colony. At the consolidation period, the road system expands from the city center toward suburban. At the last expansion period, the shape of the city has complicated its shape with complex road system. This study contributes to provide a basic analysis and data to investigate how the Yanji city has evolved over period of time. But further continuous research should be done for future urban development of the Yanji city.

• Korean Journal of Remote Sensing
• /
• v.36 no.1
• /
• pp.15-27
• /
• 2020

Accurate knowledge of land use/land cover (LULC) features and their relative changes over upon the time are essential for sustainable urban management. Urban sprawl growth has been always also a worldwide concern that needs to carefully monitor particularly in a developing country where unplanned building constriction has been expanding at a high rate. Recently, remotely sensed imageries with a very high spatial/spectral resolution and state of the art machine learning approaches sent the urban classification and growth monitoring to a higher level. In this research, we classified the Quickbird satellite imagery by object-based image analysis of Dempster-Shafer (OBIA-DS) for the years of 2002 and 2015 at Karbala-Iraq. The real LULC changes including, residential sprawl expansion, amongst these years, were identified via change detection procedure. In accordance with extracted features of LULC and detected trend of urban pattern, the future LULC dynamic was simulated by using land transformation model (LTM) in geospatial information system (GIS) platform. Both classification and prediction stages were successfully validated using ground control points (GCPs) through accuracy assessment metric of Kappa coefficient that indicated 0.87 and 0.91 for 2002 and 2015 classification as well as 0.79 for prediction part. Detail results revealed a substantial growth in building over fifteen years that mostly replaced by agriculture and orchard field. The prediction scenario of LULC sprawl development for 2030 revealed a substantial decline in green and agriculture land as well as an extensive increment in build-up area especially at the countryside of the city without following the residential pattern standard. The proposed method helps urban decision-makers to identify the detail temporal-spatial growth pattern of highly populated cities like Karbala. Additionally, the results of this study can be considered as a probable future map in order to design enough future social services and amenities for the local inhabitants.

• Animal cells and systems
• /
• v.13 no.1
• /
• pp.83-89
• /
• 2009

Investigations were made on population biology of Pampus echinogaster (Basilewsky, 1855) in the coastal areas of Korea, Yellow Sea, between August 2005 and July 2006. Population structure was not significantly different between male and females. Monthly variation of gonadosomatic index (GSI) of both sexes defined spawning period extending from March through July. A similar pattern was also observed in change at maturity stages. For males and females GSI was positively correlated with hepatosomatic index (HSI). Fecundity, ranging from 41,250 to 103,610 eggs, was related to body size, indicating that body size is the useful determinant of fecundity. The sexual maturity ($L_{50}$) was estimated as 14.98 cm TL for males and 19.32 cm TL for females. Parameters of growth estimated by the modified von Bertalanffy growth function model showed that the values of $L_{\infty}$ and K for combined data were 39.12 cm TL and 0.65 $yr^{-1}$. The growth performance index of this study (2.75) was higher than that of the previous study (2.45). This difference could be attributed to sampling method. The recruitment patterns indicated one normally distributed group. Percentage of the recruitment was 51.04% in the spawning season and the highest in August (19.78%).

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.3
• /
• pp.155-164
• /
• 2016

For frequency pattern analysis of large databases, the new tree-based frequency pattern analysis algorithm which can compensate for the disadvantages of the Apriori method has been variously studied. In frequency pattern tree, the number of nodes is associated with memory allocation, but also affects memory resource consumption and processing speed of the growth. Therefore, reducing the number of nodes in the tree is very important in the frequency pattern mining. However, the absolute criteria which need to order the transaction items for construction frequency pattern tree has lowered the compression ratio of the tree nodes. But most of the frequency based tree construction methods adapted the absolute criteria. FP-tree is typically frequency pattern tree structure which is an extended prefix-tree structure for storing compressed frequent crucial information about frequent patterns. For construction the tree, all the frequent items in different transactions are sorted according to the absolute criteria, frequency descending order. CanTree also need to absolute criteria, canonical order, to construct the tree. In this paper, we proposed a novel frequency pattern tree construction method that does not use the absolute criteria, IRFP-tree algorithm. IRFP-tree(Intersection Rule based FP-tree). IRFP-tree is constituted with the new paradigm of the intersection rule without the use of the absolute criteria. It increased the compression ratio of the tree nodes, and reduced the tree construction time. Our method has the additional advantage that it provides incremental mining. The reported test result demonstrate the applicability and effectiveness of the proposed approach.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2951-2954
• /
• 2007

Tumor hemodynamics in vascular state is numerically simulated using pressure node solution. The tumor angiogenesis pattern in our previous study is used for the geometry of vessel networks. For tumor angiogenesis, the equation that governed angiogenesis comprises a tumor angiogenesis factor (TAF) conservation equation in time and space, which is solved numerically using the Galerkin finite element method. A stochastic process model is used to simulate vessel formation and vessel. In this study, we use a two-dimensional model with planar vessel structure. Hemodynamics in vessel is assumed as incompressible steady flow with Newtonian fluid properties. In parent vessel, arterial pressure is assigned as a boundary condition whereas a constant terminal pressure is specified in tumor inside. Kirchhoff's law is applied to each pressure node to simulate the pressure distribution in vessel networks. Transient pressure distribution along with angiogenesis pattern is presented to investigate the effect of tumor growth in tumor hemodynamics.

• International Journal of Automotive Technology
• /
• v.6 no.3
• /
• pp.229-234
• /
• 2005

The dynamic crack growth in ductile steel is investigated by means of the impact loaded 3 point bending (3PB) specimens. Results from experiments and numerical simulations are compared to each other. A modified 3PB specimen designed with the reduced width at its ends has been developed in order to avoid the initial compressive loading of the crack tip and also to avoid the uncertain boundary conditions at the impact heads. Numerical simulations of the experiments are made by using a finite element method (FEM) code, ABAQUS. The high speed photography is used to obtain the crack growth and the data of the crack tip opening displacement (CTOD). The direct measurements of the relative rotations of two specimen halves are made by using the Moire interference pattern.