• Journal of Mushroom
• /
• v.11 no.2
• /
• pp.77-81
• /
• 2013

To develop a new cultivar of king oyster mushroom(Pleurotus eryngii), G09-21 as parental strain was selected by the method of Di-mon crossing between monokaryotic strain ASI 2824-21 derived from ASI 2824(Keunneutari No. 2) and dikaryotic strain ASI 2887(Aeryni 3). The Pe21-53(G09-21-10 x ASI 2844-9) was shown the best cultural characteristics, selected to be a new cultivar and designated as 'Seolsong'. The 'Seolsong' was distinctly formed incompatibility line in the confrontation growth of parental strains Keunneutari No. 2, Aeryni 3 and ASI 2844. Analysis of the genetic characteristics of the new cultivar 'Seolsong' showed a different DNA profile as that of the control strains, Keunneutari No. 2, Aeryni 3 and ASI 2844, when RAPD(Random Amplified Polymorphic DNA) primer URP4 was used. The optimum temperature and pH arrange for mycelial growth were $25{\sim}30^{\circ}C$ and pH 5~8, respectively. This new cultivar 'Seolsong' of fruiting body production per bottle was about $131.4{{\pm}}43.1$ g which is about 102% quantity compared to that of other cultivar Keunneutari No. 2. And also the stipe is thick and long, but the number of available stipe is few. Particularly, it was tolerant of high moisture above 90% during the growth period after primodia formation. We therefore expect that this new strain will save of labor and cost of cultivation by without culling work.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.3
• /
• pp.160-165
• /
• 2018

BACKGROUND: Mixed cropping of legume and grass was effective system in view point of providing organic matter and nitrogen or reducing the nitrogen starvation of following crop. The relation of the change of N and P constituents depending on the cropping types and those effects on the growth and nutrient uptake of the following crop were observed. METHODS AND RESULTS: Three cropping types, hairy vetch mono cropping, barley mono cropping, and mixed cropping of hairy vetch and barley were applied. Soil properties, growth characteristics, and nitrogen production of green manure crops were observed. In additions, the effect of cropping types on the growth pattern of corn as the following crop was observed. In the mixed cropping system, creeping type hairy vetch climbed to the erect type barely for light utilization resulting in improvement of light interception rate and higher LAI (Leaf Area Index) than in mono cropping. Mixed cropping showed higher biomass production and soil nitrogen availability among the cropping types, indicating relatively much more nutrient supply and higher yield production of following crop. CONCLUSION: Mixed cropping showed relatively higher LAI (dry matter) mainly because of intense competition for light utilization usually after flowering stage. Mixed cropping also showed relatively higher yield of corn, the following crop rather than other types, mainly due to the more biomass production potential and higher N and P production ability. Therefore, mixed cropping was adaptable method to reduce or replace chemical fertilizer application for environmentally-friendly agriculture.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.3
• /
• pp.127-133
• /
• 2012

To achieve low-cost and high-efficiency of thin-film solar cells applications, the sol-gel method that can be coated on a large area substrate, obtain homogeneous thin films of high purity was used. We studied structural and optical characteristics versus annealing temperature of $Cu_2ZnSnS_4$ which has kesterite structure by substitution low-cost sulfur (S) instead of high-cost selenium (Se). By analyzing XRD patterns, main peak was observed at $2{\theta}=28.5^{\circ}$ when Zn/Sn ratio is 0.8/1.2. And when we observed kesterite structure which has orientation of (112) direction, the more annealing temperature increase the bigger strength of (112) direction is. $Cu_2ZnSnS_4$ thin film showed characteristics of kesterite structure at $550^{\circ}C$. And when we calculated lattice constant, a = 5.5047 and $c=11.014{\AA}$ as same JCPDS (Joint Committee on Powder Standards) data measured. We measured optical transmittance to analyze optical characteristics. Optical transmittance was lower than 65 % at visible ray (${\lambda}=380{\sim}770nm$).

• Archives of Pharmacal Research
• /
• v.21 no.1
• /
• pp.6-11
• /
• 1998

The activities of two types of antiulcer agents against 9 strains of Helicobacter pylori (H. pylori) were determined by the agar dilution method. The antiulcer agents were YJA20379, a newly synthesized proton pump inhibitor developed by Yung-jin Pharmaceutical company, and omeprazole. Both compounds were found to have significant activities against this organism. The MIC values of YJA20379 and omeprazole were 11.7 and $31.25{\mu.g/ml}$ respectively. In addition, the inhibitory potency of both compounds was investigated on H. pylori urease which is believed to be an important colonization and virulence factor in the pathogenesis of gastritis and peptic ulcers. These compounds dose-dependently inhibited urease extracted with distilled water and their $IC_50$ values were $16.4{\times}10^{-5} M and 14.3{\times}10^{-5}M,$ respectively. In addition, a pH-dependent study to determine whether inhibitory potency would be activated by acid condition was performed. It was found that unlike omeprazole, YJA20379 was not affected by acid condition. To determine the inhibition pattern and optimal concentration of substrate, kinetics were evaluated at various pH levels (pH 5.0, 7.0, and 8.5). The data show that YJA20379 noncompetitively inhibited H. pylori urease and $K_M/K_i$values were 0.96 $mM/60{\mu}M (pH 5.0), 0.56 mM/141.5 {\mu}M (pH 7.0)$, and $1.94mM/34{\mu}M (pH 8.5)$, respectively. Based on data obtained, it is concluded that YJA20379 is a significant inhibitor of H. pylori growth and urease and therefore, taking these results into consideration, YJA20379 might be a beneficial therapy for gastritis and peptic ulcers induced by H. pylori.

• The Korean Journal of Health Service Management
• /
• v.3 no.1
• /
• pp.14-24
• /
• 2009

This study aims at deriving any useful information necessary to strengthen the competitiveness for growth through empirical analyses on general hospital located in a province in order to countermeasure the opening and competition of medical markets. The characteristics of user were identified on the basis of disease groups under KCD in the research method. In addition, the analysis on the expenses of diagnosis and treatment was divided into the treatment progress and degree of hospital resource utilization And the regression was carried out to identify the impacts of characteristics of inpatient users on the degree of hospital resource utilization. As a result of major research, the inpatient users of the general hospital located in the provincial area in consideration of inpatient users were formed around the inpatient disease groups representative for Korea(diseases of the respiratory system, injury and poisoning & certain other consequences of external causes). And it was understood that most of residents within a distance of 40 minute by the public transportation were using. And mostly were under the age of 9 or over 60, and the provision of medical features such as the degree of consultation and operational functions were inadequate. When we classify inpatient treatment cost for each resource application as the medical cost being the center of patient care function, the equipment and human resource application sector are constituted over half. Accordingly, the following suggestions are made as plans to strengthen the competitiveness for the growth of general hospitals located in the provincial areas on the basis of analytical results. First, it is necessary to have the characterization matching to the age and disease groups with a high frequency. Second, it is necessary to increase the degree of hospital resource utilization according to the characterization. Third, it is necessary to concentrate on public relations. The above suggestion, as a method for securing image improvement and competitive power as a general hospital, and through expansion of social function that a regional general hospital needs to secure not only as an individual institution but also as a general hospital, it can be seen that a general improvement of image as a regional general hospital is possible.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.3
• /
• pp.363-378
• /
• 2005

Statement of problem. Hydroxyapatite(HA) coated titanium surfaces have not yet showed the reliable osseointegration in various conditions. Purpose. This study was aimed to investigate microstructures, chemical composition, and surface roughness of the surface coated by the hydrothermal method and to evaluate the effect of hydrothermal coating on the cell attachment, as well as cell proliferation. Material and Methods. Commercially pure(c.p.) titanium discs were used as substrates. The HA coating on c.p. titanium discs by hydrothermal method was performed in 0.12M HCl solution mixed with HA(group I) and 0.1M NaOH solution mixed with HA(group II). GroupⅠ was heated at 180 $^{\circ}C$ for 24, 48, and 72 hours. GroupⅡ was heated at 180 $^{\circ}C$ for 12, 24, and 36 hours. And the treated surfaces were evaluated by Scanning electron microscopy(SEM), Energy dispersive X-ray spectroscopy(EDS), X-ray photoelectron spectroscopy(XPS), X-ray diffraction method(XRD), Confocal laser scanning microscopy(CLSM). And SEM of fibroblast and 3-(4,5- dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide(MTT) assay were used for cellular responses of the treated surfaces. Results. The color of surface changed in both groups after the hydrothermal process. SEM images showed that coating pattern was homogeneous in group II, while inhomogeneous in group I. H72 had rosette-like precipitates. The crystalline structure grew gradually in group II, according to extending treatment period. The long needle-like crystals were prominent in N36. Calcium(Ca) and phosphorus(P) were not detected in H24 and H48 in EDS. In all specimens of group II and H72, Ca was found. Ca and P were identified in all treated groups through the analysis of XPS, but they were amorphous. Surface roughness did not increase in both groups after hydrothermal treatment. The values of surface roughness were not significantly different between groups I and II. According to the SEM images of fibroblasts, cell attachments were oriented and spread well in both treated groups, while they were not in the control group. However, no substantial amount of difference was found between groups I and II. Conclusions. In this study during the hydrothermal process procedure, coating characteristics, including the HA precipitates, crystal growth, and crystalline phases, were more satisfactory in NaOH treated group than in HCl treated group. Still, the biological responses of the modified surface by this method were not fully understood for the two tested groups did not differ significantly. Therefore, more continuous research on the relationship between the surface features and cellular responses seems to be in need.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.341-348
• /
• 2013

Maintenance of adequate soil tension or content during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil tension and content for precision irrigation would allow optimal soil water condition to crops and minimize the adverse effects of water stress on crop growth and development. This research reports on a comparison of soil water tension and content variations in differently textured soils over time under drip irrigation using two different water management methods, i.e. pulse time and required water irrigation methods. The pulse time-based irrigation was performed by turning the solenoid valve on and off for preset times to allow the wetting front to disperse in root zone before additional water was applied. The required water estimation method was a new water control logic designed by Rural Development Administration that applies the amount of water required based on a conversion of the measured water tension into water content. The use of the pulse time irrigation method under drip irrigation at a high tension of -20 kPa and high temperatures over $30^{\circ}C$ was not successful at maintaining moisture tensions within an appropriate range of 5 kPa because the preset irrigation times used for water control could not compensate for the change in evapotranspiration during day and night. The response time and pattern of water contents for all of the tested soils measured with capacitance-based sensor probes were faster and more direct than those of water tensions measured with porous and ceramic cup-based tensiometers when water was applied, indicating water content would be a better control variable for automatic irrigation. The required water estimation-based irrigation method provided relatively stable control of moisture tension, even though somewhat lower tension values were obtained as compared to the target tension of -20 kPa, indicating that growers could expect to be effective in controlling low tensions ranging from -10 to -20 kPa with the required water estimation system.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.179-200
• /
• 1996

The intrinsic instabilities of fluid flow occurred in the melt of the Czochralski crystal growth system Czochralski method, asymmetric flow patterns and temperature profiles in the melt have been studied by many researchers. The idea that the non-symmetric structure of the growing equipment is responsible for the asymmetric profiles is usually accepted at the first time. However further researches revealed that some intrinsic instabilities not related to the non-symmetric equipment structure in the melt could also appear. Ristorcelli had pointed out that there are many possible causes of instabilities in the melt. The instabilities appears because of the coupling effects of fluid flow and temperature profiles in the melt. Among the instabilities, the B nard type instabilities with no or low crucible rotation rates are analyzed by the visualizing experiments using X-ray radiography and the 3-D numerical simulation in this study. The velocity profiles in the Silicon melt at different crucible rotation rates were measured using X-ray radiography method using tungsten tracers in the melt. The results showed that there exits two types of fluid flow mode. One is axisymmetric flow, the other is asymmetric flow. In the axisymmetric flow, the trajectory of the tracers show torus pattern. However, more exact measurement of the axisymmetrc case shows that this flow field has small non-axisymmetric components of the velocity. When fluid flow is asymmetric, the tracers show random motion from the fixed view point. On the other hand, when the observer rotates to the same velocity of the crucible, the trajectory of the tracer show a rotating motion, the center of the motion is not same the center of the melt. The temperature of a point in the melt were measured using thermocouples with different rotating rates. Measured temperatures oscillated. Such kind of oscillations are also measured by the other researchers. The behavior of temperature oscillations were quite different between at low rotations and at high rotations. Above experimental results means that the fluid flow and temperature profiles in the melt is not symmetric, and then the mode of the asymmetric is changed when rotation rates are changed. To compare with these experimental results, the fluid flow and temperature profiles at no rotation and 8 rpm of crucible rotation rates on the same size of crucible is calculated using a 3-dimensional numerical simulation. A finite different method is adopted for this simulation. 50×30×30 grids are used. The numerical simulation also showed that the velocity and flow profiles are changed when rotation rates change. Futhermore, the flow patterns and temperature profiles of both cases are not axisymmetric even though axisymmetric boundary conditions are used. Several cells appear at no rotation. The cells are formed by the unstable vertical temperature profiles (upper region is colder than lower part) beneath the free surface of the melt. When the temperature profile is combined with density difference (Rayleigh-B nard instability) or surface tension difference (Marangoni-B nard instability) on temperature, cell structures are naturally formed. Both sources of instabilities are coupled to the cell structures in the melt of the Czochralski process. With high rotation rates, the shape of the fluid field is changed to another type of asymmetric profile. Because of the velocity profile, isothermal lines on the plane vertical to the centerline change to elliptic. When the velocity profiles are plotted at the rotating view point, two vortices appear at the both sides of centerline. These vortices seem to be the main reason of the tracer behavior shown in the asymmetric velocity experiment. This profile is quite similar to the profiles created by the baroclinic instability on the rotating annulus. The temperature profiles obtained from the numerical calculations and Fourier transforms of it are quite similar to the results of the experiment. bove esults intend that at least two types of intrinsic instabilities can occur in the melt of Czochralski growing systems. Because the instabilities cause temperature fluctuations in the melt and near the crystal-melt interface, some defects may be generated by them. When the crucible size becomes large, the intensity of the instabilities should increase. Therefore, to produce large single crystals with good quality, the behavior of the intrinsic instabilities in the melt as well as the effects of the instabilities on the defects in the ingot should be studied. As one of the cause of the defects in the large diameter Silicon single crystal grown by the

• Korean Journal of Weed Science
• /
• v.14 no.1
• /
• pp.62-70
• /
• 1994

This study was conducted to find out if there are some differences in germination, growth and morphological characteristics between rice(Oryza saliva) and barnyardgrass(Echinochloa crus-galli) under various cropping patterns and to abtain the fundamental information on weed control method in direct seeded rice. Rice was broadcast on soil-surface(Broadcast rice), drill seeded in soil(Drilled rice) and barnyardgrass was drill seeded in soil(Barnyardgrass) under dry(Dry condition) and water direct seeded condition(Water condition). Also rice was transplanted with 8-day seedlings(8 -day-old seedling) and 25-day seedlings(25-*day-old seedling) under transplanting condition(Transplanting condition) At 1, 2, 3, 5, 7, 10, 15 and 20 days after seeding or transplanting(DAS/T), plants were harvested to examine their germination, growth and morphology. The major results were as follows ; Until 5 DAS/T growth of rice and barnyardgrass were well established under dry condition but under water condition growth of shoots was mainly elongated. At 20 DAS/T barnyardgrass had greater plant height and shoot fresh weight than rice under direct seeded condition, while plant height and shoot fresh weight of rice was greater than those of barnyardgrass under transplanting condition. Root length of barnyardgrass was greater under the dry, drilled, direct seeded conditions than that of rice under the water, broadcast, transplanting condition, respectively. And root fresh weight of rice under direct seeded condition was similar to that of barnyardgrass but that of rice under transplanting condition was significantly greater than that of barnyardgrass. Barnyardgrass only formed mesocotyls and its length increased with increased depth of seeding. Leaf stage and leaf area of barnyardgrass was greater under the dry, drilled than those of rice under water, broadcast conditions, respectively, while those of rice was greater than those of barnyardgrass under transplanting condition. Chlorophyll contents were higher in barnyardgrass, dry direct seeded rice, transplanted rice, water direct seeded rice in descending order.

• Clinical and Experimental Reproductive Medicine
• /
• v.12 no.2
• /
• pp.25-37
• /
• 1985

Four points on the basal body temperature (B.B.T.) curve was correlated with the estimated time of ovulation, as determined by serial ultrasound in 50 induced menstrual cycles from 22 subjects. The time of ovulation was estimated by measuring the maximal diameter of follicles and observing the morphologic changes within the ovary from follicle to corpus luteum. The results were as following; 1. The diameter of the follicle measured at the day before disappearance was 21.1 mm on an average (S.D.: 2.14). The average follicular growth for 4 days before ovulation was measured at a rate of 2.8 mm/day, and rapid growth of follicle was observed 3.1 mm/day at the day before. 2. The changes associated with rupture of the follicles were the followings, in order of frequency; decrease in size(94%), disappearance of follicles(64%), fluid in the Cul-de-Sac(26%) and increased internal echoes(16%). 3. Only 20 of 50 cycles, exhibited a BBT dip and correlated with the estimated time of ovulation by ultrasound in 2 of which cases(10%). BBT nadir, 30 of 50 cycles, correlated in 5(16.7%). The first day of hyperthermic plateau(FDHP) and BBT coverline was exhibited in all cycles, correlated in 41(82%) and 35(70%) cases. 4. The relationship between the diameter of dominant dominant follicle, measured by ultrasound, and the basal body temperature curve were as following. During cycles in which dip was observed on the BBT curve, the follicular diameter were 10.5${\pm}$2.12 mm on 4 days prior to the point (D-4), and 12.5${\pm}$2.12 mm (D-3), 15.5${\pm$2.12 mm (D-2), 17.0${\pm}$1.41 mm (D-1) and 21.5${\pm}$2.12 mm just prior to the dip (D-0). In the nadir; 9.6${\pm}$1.67 mm (N-4), 12.8${\pm}$1.79 mm (N-3), 16.2${\pm}$1.92 mm (N-2), 18.2${\pm}$2.17 mm (N-1) and 21.4${\pm}$2.61 mm (N-0). In the First day of Hyperthemic Plateau (FDHP); 9.8${\pm}$1.36 mm (F-4), 12.4${\pm}$1.41 mm (F-3),15.1${\pm}$1.57 mm (F-2), 18.1${\pm}$1.67 mm (F-1) and 21.2${\pm}$2.25 mm (F-0). In the BBT coverline endopint; 9.9${\pm}$.39 mm (C-4), 12.5 ${\pm}$1.44 mm (C-3), 15.2${\pm}$1.64 mm (C-2), 18.0 ${\pm}$1.69 mm (C-1), and 21.2${\pm}$2.31 mm (C-0). 5. The relationship between the ultrasonographic signs of ovulation and the basal body temperature curve were as following. The BBT dip correlated with the ovulation in 2 cases, which revealed decrease in follicular diameter (100%), fluid pattem in the Cul-de-Sac (1 case, 50%) and complete disappearance of follicle (1 case, 50%). In the nadir (5 cases); the ultrasonographic signs of ovulation were decrease in follicular diameter (5 cases, 100%), fluid pattern in the Cul-de-Sac (1 case, 20%) and complete disappearance of follicle (3 cases, 60%). In the First day of Hyperthermic Plateau (41 cases); decrease in follicular diameter (40 cases, 97.6%), fluid pattern in the Cul-de-Sac (11 cases, 26.8%), appearance of internal echo and thickening of the wall (6 cases, 14.6%) and com plete disappearance of follicle (28 cases, 68.3%). In the BBT coverline endpoint (35 cases); decrease in follicular diameter (33 cases, 94.3%), fluid pattern in the Cul-de Sac (9 cases, 25.7%), appearance of internal echo and thickening of the wall (5 cases 14.3%) and complete disappearance of follicle (20 cases, 57.1%).