• 대한가정학회지
• /
• 제17권4호
• /
• pp.1-14
• /
• 1979

The functional problems of the basic pattern of clothing are a matter of the first importance to clothing construction. Therefore, the ergonomic analysis of the expansion and contraction of the upper body surface, due to motion, has become required. thus in order to obtain the measurements and rate of expansion and contraction of the upper body surface following from its motions, the development figure of " Shell" and somatometry were employed. The results obtained through the investigation can be summarized as follows : 1) According to the developmental figures of "Shell" the latitudes centering around the shoulder line present contractive tendencies by arm movement. The longitudes around the center back waist length are expansive tendencies when bent forward. In the case of a 15$^{\circ}$ lean backward posture, the longitudes around the center front waist length are expansive tendencies. 2) By somatometry, the region from the scapula to the axilla point the upper back with presents the greatest expansion (more than 30%). The region from scapla to arm presents the maximum rate of contraction. In considering the longitude , under the axilla waist length and the bust point waist length generally shows the greatest rate of expansion. 3) The bust point waist length and under the axilla waist length are of great importance to the basic pattern of clothing. and have expansive tendencies(6.3cm). Among the latitudes, the upper back width has the greatest tendency for expansion (7.83 cm). 4) The region which presents the greatest rate of the expansion and contraction is in the proximity of the arm. These results testify that the amount of room of the back width must be given consideration in constructing the basic pattern of clothing.pattern of clothing.

• 대기
• /
• 제27권1호
• /
• pp.55-65
• /
• 2017

This study investigates how Eurasian snow cover in spring (March and April) is associated with Korean temperature during summer (June-July-August). Two leading modes of Eurasian snow cover variability in spring for 1979~2015 are obtained by Empirical Orthogonal Function (EOF) analysis. The first EOF mode of Eurasian snow cover is characterized by a zonally elongated pattern over the whole Eurasian region and its principal component is more correlated with Korean temperature during June. On the other hand, the second EOF mode of Eurasian snow cover is characterized by an east-west dipole-like pattern, showing positive anomalies over eastern Eurasian region and negative anomalies over western Eurasian region. This dipole-like pattern is related with Korean temperature during August. The first leading mode of Eurasian snow cover is associated with anomalous high (low) pressure over Korea (Sea of Okhotsk) during June, which might be induced by much evaporation of soil moisture in Eurasia during March. On the other hand, the second mode of Eurasian snow cover is associated with a wave train resembling with Eurasian (EU)-like pattern in relation to the Atlantic sea surface temperature forcing, leading to the anomalous high pressure over Korea during August. Understanding these two leading modes of snow cover in Eurasian continent in spring may contribute to predict Korean summer temperature.

• 복식
• /
• 제66권1호
• /
• pp.42-57
• /
• 2016

The Tibetan people are an ethnic group that is native to Tibet who have adapted to the region's harsh climate and environment, and developed their own culture. Religion played a central role in maintaining its traditional culture and society in the history. The objective of this study is to understand Tibetan costume and religion, and examine patterns that appear on the costume to study their religious symbolism. The significance of this study lies in explaining the symbolisms of the patterns that appear on the costume in terms of cultural maintenance and change. Based on literature review, I summarized the data about Tibet's environment, history and religion, and divided the residential district into three: ${\ddot{U}}$-Tsang, Amdo, Khamba. Then, I organized each region's characteristics and clothes, and studied Tibetan Buddhism (Vajrayana) costumes and features of the patterns that appear on the costumes. Through combining these data, I would like to examine the religious symbolism of the costume pattern of Tibet. Buddhism is at the heart of cultural and social maintenance and change in Tibet, and the patterns shown in the costume is influenced mostly from Buddhism. The features of general Tibetan costume vary with the region and life style, but the patterns that appear on the costume are used over a wide area to represent good luck and the spread of Buddhist teachings. The costumes for religious rites vary with religious sects, but most of the patterns are commonly used. The symbolism of pattern is a form of figure that represents the human psyche and physical world. The symbolism of pattern implies meanings such as compensation or futuristic wish. First, the lucky omen normally means long life, happiness and peace, and means religious salvation in Buddhist perspective. Second, warding off evil spirits normally means avoiding misfortune, and means dignity and self-protection, and protection of Buddhadharma in Buddhist perspective.

• 한국기계가공학회지
• /
• 제20권2호
• /
• pp.51-57
• /
• 2021

The quality of the ceramic sintered coating on a metal surface through laser surface treatment is affected by the laser irradiation pattern. Depending on the laser irradiation pattern, the amount of residual stress and heat applied or accumulated on the surface increases or decreases, affecting the thickness attained in the ceramic sintering area. When the heat energy accumulated in the sintering area is high, the ceramic and the metal alloy melt and sufficiently mix to form a homogeneous and thick bonding interface. In this study, the thermal energy accumulation in the region sintered with zirconia was controlled using four types of laser processing patterns. The thickness of the diffusion region is analyzed by laser-induced breakdown spectroscopy of Mg-ZrO2 generated by laser sintering zirconia powder on the magnesium alloy surface. On the basis of the analysis of the Mg and Zr present in the sintered region through LIBS, the effect of the irradiation pattern on the sintering quality is confirmed by comparing and analyzing the heat and mass transfer tendency of the diffusion layer and the degree of diffusion according to the irradiation pattern. The derived diffusion coefficients differed by up to 9.8 times for each laser scanning pattern.

• 말소리와 음성과학
• /
• 제1권4호
• /
• pp.111-117
• /
• 2009

In this paper, a new speech endpoint detector in noisy environment is proposed. According to the previous research, the energy feature in the speech region is easily distinguished from that in the speech absent region. In conventional method, the endpoint can be found by applying the edge detection filter that finds the abrupt changing point in feature domain. However, since the frame energy feature is unstable in noisy environment, the accurate edge detection is not possible. Therefore, in this paper, the novel feature extraction method based on spectrum envelop pattern is proposed. Then, the edge detection filter is applied to the proposed feature for detection of the endpoint. The experiments are performed in the car noise environment and a substantial improvement was obtained over the conventional method.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.758-765
• /
• 2003

An experimental investigation on the flow pattern and pressure drop was carried out for both an adiabatic and a diabatic two-phase flow in a horizontal tube with pure refrigerants R134a and R123 and their mixtures as test fluids. The observed flow patterns were compared to the flow pattern map of Kattan et al., which predicted well the present data over the entire regions of mass velocity in this study. The measured frictional pressure drop in the adiabatic experiments increased with an increase in vapor quality and mass velocity These data were compared to various correlations proposed in the past for the frictional pressure drop. The Chisholm correlation underpredicted the present data both for pure fluids and their mixtures in the entire mass velocity range of 150 to 600 kg/m$^2$s covered in the measurements, white the Friedel correlation was found to overpredict the present data in the stratified and stratified-wavy flow region, and to underpredict in the annular flow region.

• 전자공학회논문지B
• /
• 제29B권11호
• /
• pp.111-119
• /
• 1992

In this paper, we propose an edge detection scheme for noisy images based on the co-occurrence matrix. In the proposed scheme based on the step edge model, the gray level information is simply converted into a bit-map, i.e., the uniform and boundary regions of an image are transformed into a binary pattern by using the local mean. In this binary bit-map pattern, 0 and 1 densely distributed near the boundary region while they are randomly distributed in the uniform region. To detect the boundary region, the co-occurrence matrix on the bit-map is introduced. The effectiveness of the proposed scheme is shown via a quantitative performance comparison to the conventional edge detection methods and the simulation results for noisy images are also presented.

• Journal of Ecology and Environment
• /
• 제30권4호
• /
• pp.331-340
• /
• 2007

We examined the evolutionary and ecological processes shaping current geographical distributions of a Korean wood-eating cockroach species, Cryptocercus kyebangensis. Our research aims were to understand evolutionary pattern of DNA sequences, to construct genetic network of Cryptocercus kyebangensis local populations and to understand evolutionary and ecological processes shaping their current geographical distribution patterns via DNA sequence information and genetic networks, using sequence data of two genes (ITS-2 and AT region) from local populations of C. kyebangensis. The results suggest that the ITS-2 and AT region are appropriate molecular markers for elucidating C. kyebangensis geographic patterns at the population level. The MSN-A based on the ITS-2 showed two possible routes, the Hwaak-san and Myeongji-san route and the Seorak-san and Gyebang-san route, for migration of ancestral C. kyebangensis into South Korea. The MSNs (MSN-A and -B) elucidate migration routes well within South Korea, especially the route of Group I and Group II.

• 한국해양공학회지
• /
• 제10권3호
• /
• pp.105-116
• /
• 1996

In this paper, we report the experimental results for the flow pattern and the material transport around a cavity subject to a sinusoidal external flow at the far region to ward the open side of the cavity. A tilting mechanism is used to generate a oscillatory flow inside a shallow rectangular container having a cavity at one side. The surface flow visualization is performed to obtain the unsteady behavior of vortices generated at two edges situated at the entrance of the cavity. It was found that at the period 4.5 sec., the behavior of the vortices is asymmetric, and there exists a steady residual flow in the cavity. The bottom flow patterns are also visualized. There are two regions outside of the cavity where the bottom fluid particles concentrate. The material transport in this flow model is very peculiar; fluid particles in the cavity flows outward through the passage along the walls starting from the edges, and particles in the outer region approach the cavity from the central region.

• 한국연소학회지
• /
• 제7권1호
• /
• pp.58-64
• /
• 2002

The bed combustion in an incinerator interacts with the gas flow region through heat and mass transfer. Combined bed combustion and gas flow simulations are performed to investigate this coupled interaction for various operating conditions and furnace configurations. Radiation onto the bed from the furnace is interrelated with the combustion characteristics in the bed, and is also affected by the flow pattern in the gas flow region. Since the contribution of gaseous emission to the total radiation is significant, an adequate flow pattern in a well-designed furnace shape would lead to an increased heat influx on the bed, especially in the early stage of the waste combustion. Advancing the initiation point of the waste combustion can also reduce the size of the lower gas temperature region above the bed, which can be achieved by controlling operating conditions such as the waste feeding rate, the bed height and the primary air flow distribution.