• Korean Journal of Materials Research
• /
• v.22 no.1
• /
• pp.24-28
• /
• 2012

$In_2O_3$ films were deposited by RF magnetron sputtering on a glass substrate and then the effect of post deposition annealing in nitrogen atmosphere on the structural, optical and electrical properties of the films was investigated. After deposition, the annealing process was conducted for 30 minutes at 200 and $400^{\circ}C$. XRD pattern analysis showed that the as deposited films were amorphous. When the annealing temperature reached 200-$400^{\circ}C$, the intensities of the $In_2O_3$ (222) major peak increased and the full width at half maximum (FWHM) of the $In_2O_3$ (222) peak decreased due to the crystallization. The films annealed at $400^{\circ}C$ showed a grain size of 28 nm, which was larger than that of the as deposited amorphous films. The optical transmittance in the visible wavelength region also increased, while the electrical sheet resistance decreased. In this study, the films annealed at $400^{\circ}C$ showed the highest optical transmittance of 76% and also showed the lowest sheet resistance of $89{\Omega}/\Box$. The figure of merit reached a maximum of $7.2{\times}10^{-4}{\Omega}^{-1}$ for the films annealed at $400^{\circ}C$. The effect of the annealing on the work-function of $In_2O_3$ films was considered. The work-function obtained from annealed films at $400^{\circ}C$ was 7.0eV. Thus, the annealed $In_2O_3$ films are an alternative to ITO films for use as transparent anodes in OLEDs.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.271-278
• /
• 2000

We have fabricated and analyzed the lasing characteristics of 1.3$\mu\textrm{m}$ Spot-Size-Converter (SSC) integrated Fabry-Perot (FP) laser diodes, which are very promising light sources for optical subscriber networks. SSC-LDs has been developed by BIB (buttjoint-built-in) coupling and selective MOVPE growth. High-performances were achieved such as the slope efficiency from the SSC facet of 0.23-0.32 mW/mA, the full-width at the half maximum of the far-field pattern (FFP) of 9.5$^{\circ}$~12.3$^{\circ}$, the alignment tolerances of $\pm$2.3$\mu\textrm{m}$ and $\pm$2.5$\mu\textrm{m}$ within the extra-coupling loss of 1 dB for the vertical and parallel directions, respectively. These experimental results were compared to theoretical ones in order to clarify the operational problems and give a good design direction of the fabricated SSC-LDs. It was revealed that an asymmetric output power from the facets, an irrelevancy of FFP and the waveguide structure around SSC facet region, and a poor temperature characteristics were originated from the scattering in the BIB and SSC sections and SHB effect in the active section for the first time.t time.

• Food Science and Preservation
• /
• v.18 no.2
• /
• pp.184-190
• /
• 2011

Limonoid UDP-glucosyltransferase (LUGT) is an enzyme that converts limonoids into their corresponding glucosides and ultimately ameliorates limonoid bitterness in Citrus species. In this paper, the LUGT gene was cloned via PCR from 10 Jeju Citrus species. All the deduced glucosyltransferase proteins harbored a highly conserved plant secondary product glucosyltransferase (PSPG) motif within the C terminal region. Phylogenetic analysis based on the amino acid sequence comparison of the LUGT proteins from 10 Citrus species generated three distinct types. The expression patterns of LUGT gene in three representative species from each type were quite different with that of C. unshiu Marc. cv. Miyagawawase(Gungcheon), which his without distinctive juice delayed bitterness. Ourresultssho wth at some Citrus speciessuchas Citrusleiocarpa HORT(Bingul), Citruserythrosa HORT (Dongjunggul), and Citrustachibana TANAKA(Honggul) end emicin Jeju maybe susceptible to intense juice delayed bitterness due to delay inexpression of LUGT.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.2
• /
• pp.327-353
• /
• 1994

This study was performed to evaluate the effects of number and alignment of implant fixture and various bar designs on the retention of denture and the stress distribution. Six kinds of photoelastic mandibular models and nine kinds of overdenture specimens were designed. A unilateral vertical load was gradually applied on the right first molar to calculate the maximal dislodgement load of each specimen. A unilateral vertical load of 17 Kgf was applied on the right first molar and a vertical load of 10 Kgf was applied on the interincisal edge region. The stress pattern which developed in each photoelastic model was analyzed by the reflection polariscope. The results obtained were as follows: 1. The maximal dislodgement load reversely increased with the distance from the loading point to the implant fixture, while it linearly increased with that from the most posterior implant fixture to the mesial clip. The maximal dislodgement load also increased with the use of a cantilever bar. 2. Under the posterior vertical load, the stress to the supporting tissue of the denture base increased with the distance from the loading point to the implant future. The stress concentration on the apical area of the implant future reversely increased with the distance from the loading point to the implant future. 3. In the overdentures supported by two implant fixtures under the posterior vertical load. the specimen implanted on lateral incisor areas with a cantilever bar exhibited more favorable stress distribution than that without a cantilever bar. The specimen implanted on the canine areas without a cantilever bar, however, exhibited more favorable stress distribution. 4. In the overdentures supported by three implant fixtures. the specimen implanted ell the midline and canine areas exhibited more favorable stress distribution than that implanted oil the midline and the first premolar areas. 5. In the overdentures supported by four implant fixtures. the specimen implanted with two adjacent implant fixtures exhibited more favorable stress distribution than that implanted at equal distance under the posterior vertical load. 6. Under the anterior vertical load, the overdentures supported by three implant fixtures exhibited stress concentration on the supporting structure of the middle implant future. In overdentures supported by two or four implant futures, no significant difference was noted in stress distribution between the types of bars. These results indicate that the greater the number of implant fixtures, the better the stress distribution is. A favorable stress distribution may be obtained in the overdentures supported by two or three implant fixtures, if the location and the design of the bar are appropriate.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.18
• /
• pp.8281-8285
• /
• 2016

Background: Helicobacter pylori is a cause of chronic gastritis, peptic ulcer disease, and gastric malignancy, infection being a serious health problem in Thailand. Recently, clarithromycin resistant H. pylori strains represent the main cause of treatment failure. Therefore this study aimed to determine the prevalence and pattern of H. pylori resistance to clarithromycin in Suranaree University of Technology Hospital, Suranree University of Technology, Nakhon Ratchasima, Northeastern Thailand, Nakhon Ratchasima province, northeast of Thailand. Materials and Methods: This hospital-based cross-sectional study was carried out between June 2014 and February 2015 with 300 infected patients interviewed and from whom gastric mucosa specimens were collected and proven positive by histology. The gastric mucosa specimens were tested for H. pylori and clarithromycin resistance by 23S ribosomal RNA point mutations analysis using real-time polymerase chain reactions. Correlation of eradication rates with patterns of mutation were analyzed by chi-square test. Results: Of 300 infected patients, the majority were aged between 47-61 years (31.6%), female (52.3%), with monthly income between 10,000-15,000 Baht (57%), and had a history of alcohol drinking (59.3%). Patient symptoms were abdominal pain (48.6%), followed by iron deficiency anemia (35.3%). Papaya salad consumption (40.3%) was a possible risk factor for H. pylori infection. The prevalence of H. pylori strains resistant to clarithromycin was 76.2%. Among clarithromycin-resistant strains tested, all were due to the A2144G point mutation in the 23S rRNA gene. Among mutations group, wild type genotype, mutant strain mixed wild type and mutant genotype were 23.8%, 35.7% and 40.5% respectively. With the clarithromycin-based triple therapy regimen, the efficacy decreased by 70% for H. pylori eradication (P<0.01). Conclusions: Recent results indicate a high rate of H. pylori resistance to clarithromycin. Mixed of wild type and mutant genotype is the most common mutant genotype in Nakhon Ratchasima province, therefore the use of clarithromycin-based triple therapy an not advisable as an empiric first-line regimen for H. pylori eradication in northeast region of Thailand.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.8 no.2
• /
• pp.242-255
• /
• 1997

Characteristics of attention deficit of attention-deficit hyperactivity disorder(ADHD) were investigated by administering six computerized attention tests of Vienna Test System and four neuropsychological tests to children aged 6-12, with ADHD(n=21) and age-matched normal control children(n=22). The findings indicated that ADHD children show lower level of vigilance, more decline of performance in vigilance task on time, and impaired preparedness to response. They also have selective attention deficit on monitoring tasks, but did not have sustained attention deficit compared with normal control children. On the tasks wich overload their information processing capacity, ADHD children show more impulsive response pattern than normal control children. The performance of ADHD was worse than control on the neuropsychological tests sensitive to frontal lobe dysfunction. The presense 'These' attention deficits supports the theory that the defect of ADHD is due to the dysfunction of more than one brain region, including brain stem reticular formation and frontal lobe.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.718-724
• /
• 2008

Tooth impaction is a frequently observed eruption anomaly in pediatric dental practice. Young patients with impacted or unerupted teeth have more prediction for dentigerous cyst formation. Dentigerous cyst presents radiographic features, unilocular or multilocular radioluscency. Cysts occur most frequently in the premolar region except third molar. Dentigerous cysts can grow to a considerable size, and large cysts may be associated with a painless expansion of the bone in the involved area. Extensive lesions may result in facial asymmetry, osseous destruction, root resorption of proximal teeth and displacement of associated tooth. The nature of the causative tooth influences the type of surgical treatment required for the dentigerous cyst. If the cyst is associated with a supernumerary or wisdom tooth, complete enucleation of the cyst along with extraction of tooth may be the first treatment choice. Otherwise, preservation of the associated teeth should be considered to prevent a young patient from psychological and mental trauma because of the loss of tooth. We should consider the degree of tooth displacement, osseous destruction and growth pattern of oromaxillofacial area when planning treatment. Thus a proper and logical treatment planning can help a proper growth and development of oromaxillofacial area and can save the patient from a psychological and mental trauma. This report describes 4 cases of the management of impacted premolars and molars associated with dentigerous cysts in children.

• Journal of the Economic Geographical Society of Korea
• /
• v.7 no.2
• /
• pp.261-281
• /
• 2004

The location of auto industry in Jeon-buk is due to the strategies for secure a low-priced industrial site of the auto assembly companies, which attained to quantitative growth stage in the early part 1990's, and the regional balanced development policy by the location of leader enterprise of the government. As a consequence of the reversal development pattern that is located the auto parts firm after locating the auto assembly companies, the Jeon-buk auto industry has many structural vulnerability. First, because of the lack development of auto parts industries, the auto assembly companies located in Jeon-buk are dependent many auto parts at a external region. Second, most of auto parts firm belongs to the singular assembly company exclusively. And the majority of auto parts industries are the low value-added products that are necessary a simple labor power. Third, the agglomeration undeveloped of associated industries with automobile caused a low competitiveness of invitation a manufacturing company as against other provinces. For a regional economic development by the auto industry, it is necessary a flexible regional structure of production through an agglomeration of associated industries. The geographical proximity between an assembly company and a parts firms is an important locational factor with the induction of Just-in-Time production system and a modularization in the auto industry. And a modularization applies to more new factory than the existing factories. So that, Jeon-buk self-government has to create an amicable industrial environment, try to attract an auto parts enterprises and plan an agglomerated industrial complex that is able to supply a parts modulated to assembly company.

• Strategy21
• /
• s.43
• /
• pp.5-28
• /
• 2018

The tensions between the U.S and China, which form the two pillars of the G2 era, seem to have persisted even after the Trump administration inaugurated. The strong confrontation between the two in recent foreign security issues may drive to develop an inadvertent military conflict, and it is high likely to occur in the maritime are. The purpose of this study is not only to analyze the balance of modernized naval forces in the PLAN through naval strategy changes and weapons system modernization trend, but also to predict the impact of the geographical proximity difference on the balance of naval forces in the disputed areas. It examined the impact of distance and geography on naval power by assessing the modernization pattern of the PLAN and capabilities in the context of two scenarios at different distances from China by 2020: one centered on Taiwan and the other on the Spratly Islands. The PLAN's strategy had impact on operational concept and forces construction. First, from the viewpoint of operation operational concept, it can be seen that the passive defense is changing into active defense. Second, in terms of power construction, it can threaten the surface and submarines of U.S power from a distance. And they generated follow three features; The ocean is not the focus of Chinese submarines, Horizontal and vertical expansion of Chinese naval vessels, The improvement of the suppression ability as the Chinese naval modernization ratio increases. The strength of the PLAN is dominant over the U.S in terms of reserves, and it can complement the qualitative deterioration by utilizing nearby bases in the vicinity of the mainland, such as the Taiwan Strait. However, due to the shortage of aircraft carriers, there is a possibility that it will take some time to secure the advantage of air and ocean in the amphibious operation. Therefore, as the dispute is prolonged, China may fail to achieve its original goal. In addition, the lack of cutting edge Commanding Ships may bring to weaken the C2 capabilities. At results, it is expected that PLAN will not be able to have a superiority in the short term due to lagging behind U.S advanced technology. Nevertheless, PLAN has strengthened its naval power through modernization sufficiently and it is highly likely to use force. Especially, it is more likely in the region where the naval power operation like the Taiwan Strait is possible with the almost equality to that of the United States. China will continue to use its naval forces to achieve a rapid and decisive victory over U.S in the close area from the land.

• Journal of the Korean earth science society
• /
• v.32 no.4
• /
• pp.360-372
• /
• 2011

In order to clarify the advection and dispersion characteristics of volcanic tephra to be emitted from the Mt. Baekdu, several numerical experiments were carried out using three-dimensional atmospheric dynamic model, Weather and Research Forecast (WRF) and Laglangian particles dispersion model FLEXPART. Four different temporally averaged meteorological values including wind speed and direction were used, and their averaged intervals of meteorological values are 1 month, 10 days, and 3days, respectively. Real time simulation without temporal averaging is also established in this study. As averaging time of meteorological elements is longer, wind along the principle direction is stronger. On the other hands, the tangential direction wind tends to be clearer when the time become shorten. Similar tendency was shown in the distribution of volcanic tephra because the dispersion of particles floating in the atmosphere is strongly associated with wind pattern. Wind transporting the volcanic tephra is divided clearly into upper and lower region and almost ash arriving the Korean Peninsula is released under 2 km high above the ground. Since setting up the temporal averaging of meteorological values is one of the critical factors to determine the density of tephra in the air and their surface deposition, reasonable time for averaging meteorological values should be established before the numerical dispersion assessment of volcanic tephra.